1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
|
/*
* (C) Copyright 2001, 2002, 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Keith Outwater, keith_outwater@mvis.com`
* Steven Scholz, steven.scholz@imc-berlin.de
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
* DS1307 and DS1338/9 Real Time Clock (RTC).
*
* based on ds1337.c
*/
#include <common.h>
#include <command.h>
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
/*---------------------------------------------------------------------*/
#undef DEBUG_RTC
#ifdef DEBUG_RTC
#define DEBUGR(fmt,args...) printf(fmt ,##args)
#else
#define DEBUGR(fmt,args...)
#endif
/*---------------------------------------------------------------------*/
#ifndef CONFIG_SYS_I2C_RTC_ADDR
# define CONFIG_SYS_I2C_RTC_ADDR 0x68
#endif
#if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000)
# error The DS1307 is specified only up to 100kHz!
#endif
/*
* RTC register addresses
*/
#define RTC_SEC_REG_ADDR 0x00
#define RTC_MIN_REG_ADDR 0x01
#define RTC_HR_REG_ADDR 0x02
#define RTC_DAY_REG_ADDR 0x03
#define RTC_DATE_REG_ADDR 0x04
#define RTC_MON_REG_ADDR 0x05
#define RTC_YR_REG_ADDR 0x06
#define RTC_CTL_REG_ADDR 0x07
#define RTC_SEC_BIT_CH 0x80 /* Clock Halt (in Register 0) */
#define RTC_CTL_BIT_RS0 0x01 /* Rate select 0 */
#define RTC_CTL_BIT_RS1 0x02 /* Rate select 1 */
#define RTC_CTL_BIT_SQWE 0x10 /* Square Wave Enable */
#define RTC_CTL_BIT_OUT 0x80 /* Output Control */
/* MCP7941X-specific bits */
#define MCP7941X_BIT_ST 0x80
#define MCP7941X_BIT_VBATEN 0x08
static uchar rtc_read (uchar reg);
static void rtc_write (uchar reg, uchar val);
/*
* Get the current time from the RTC
*/
int rtc_get (struct rtc_time *tmp)
{
int rel = 0;
uchar sec, min, hour, mday, wday, mon, year;
#ifdef CONFIG_RTC_MCP79411
read_rtc:
#endif
sec = rtc_read (RTC_SEC_REG_ADDR);
min = rtc_read (RTC_MIN_REG_ADDR);
hour = rtc_read (RTC_HR_REG_ADDR);
wday = rtc_read (RTC_DAY_REG_ADDR);
mday = rtc_read (RTC_DATE_REG_ADDR);
mon = rtc_read (RTC_MON_REG_ADDR);
year = rtc_read (RTC_YR_REG_ADDR);
DEBUGR ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
"hr: %02x min: %02x sec: %02x\n",
year, mon, mday, wday, hour, min, sec);
#ifdef CONFIG_RTC_DS1307
if (sec & RTC_SEC_BIT_CH) {
printf ("### Warning: RTC oscillator has stopped\n");
/* clear the CH flag */
rtc_write (RTC_SEC_REG_ADDR,
rtc_read (RTC_SEC_REG_ADDR) & ~RTC_SEC_BIT_CH);
rel = -1;
}
#endif
#ifdef CONFIG_RTC_MCP79411
/* make sure that the backup battery is enabled */
if (!(wday & MCP7941X_BIT_VBATEN)) {
rtc_write(RTC_DAY_REG_ADDR,
wday | MCP7941X_BIT_VBATEN);
}
/* clock halted? turn it on, so clock can tick. */
if (!(sec & MCP7941X_BIT_ST)) {
rtc_write(RTC_SEC_REG_ADDR, MCP7941X_BIT_ST);
printf("Started RTC\n");
goto read_rtc;
}
#endif
tmp->tm_sec = bcd2bin (sec & 0x7F);
tmp->tm_min = bcd2bin (min & 0x7F);
tmp->tm_hour = bcd2bin (hour & 0x3F);
tmp->tm_mday = bcd2bin (mday & 0x3F);
tmp->tm_mon = bcd2bin (mon & 0x1F);
tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000);
tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
tmp->tm_yday = 0;
tmp->tm_isdst= 0;
DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
return rel;
}
/*
* Set the RTC
*/
int rtc_set (struct rtc_time *tmp)
{
DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
printf("WARNING: year should be between 1970 and 2069!\n");
rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon));
#ifdef CONFIG_RTC_MCP79411
rtc_write (RTC_DAY_REG_ADDR,
bin2bcd (tmp->tm_wday + 1) | MCP7941X_BIT_VBATEN);
#else
rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
#endif
rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
#ifdef CONFIG_RTC_MCP79411
rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec) | MCP7941X_BIT_ST);
#else
rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
#endif
return 0;
}
/*
* Reset the RTC. We setting the date back to 1970-01-01.
* We also enable the oscillator output on the SQW/OUT pin and program
* it for 32,768 Hz output. Note that according to the datasheet, turning
* on the square wave output increases the current drain on the backup
* battery to something between 480nA and 800nA.
*/
void rtc_reset (void)
{
struct rtc_time tmp;
rtc_write (RTC_SEC_REG_ADDR, 0x00); /* clearing Clock Halt */
rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_SQWE | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS0);
tmp.tm_year = 1970;
tmp.tm_mon = 1;
tmp.tm_mday= 1;
tmp.tm_hour = 0;
tmp.tm_min = 0;
tmp.tm_sec = 0;
rtc_set(&tmp);
printf ( "RTC: %4d-%02d-%02d %2d:%02d:%02d UTC\n",
tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
return;
}
/*
* Helper functions
*/
static
uchar rtc_read (uchar reg)
{
return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
}
static void rtc_write (uchar reg, uchar val)
{
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
#endif
|
