1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
|
// SPDX-License-Identifier: GPL-2.0+
// Copyright (C) 2021 Oleh Kravchenko <oleg@kaa.org.ua>
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include "o4-imx6ull-nano.dtsi"
/ {
model = "O4-iMX-NANO";
compatible = "out4,o4-imx-nano",
"out4,o4-imx6ull-nano",
"fsl,imx6ull";
aliases {
mmc1 = &usdhc1;
};
chosen {
stdout-path = &uart1;
};
leds {
compatible = "gpio-leds";
led0 {
color = <LED_COLOR_ID_RED>;
gpios = <&pcf8574a 0 GPIO_ACTIVE_LOW>;
};
led1{
color = <LED_COLOR_ID_GREEN>;
gpios = <&pcf8574a 1 GPIO_ACTIVE_LOW>;
};
led2 {
gpios = <&pcf8574a 2 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_BLUE>;
};
led3 {
color = <LED_COLOR_ID_RED>;
gpios = <&pcf8574a 3 GPIO_ACTIVE_LOW>;
};
led4{
color = <LED_COLOR_ID_GREEN>;
gpios = <&pcf8574a 4 GPIO_ACTIVE_LOW>;
};
led5 {
color = <LED_COLOR_ID_BLUE>;
gpios = <&pcf8574a 5 GPIO_ACTIVE_LOW>;
};
};
usbotg1_vbus: reg_usbotg1_vbus {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&pcf8574a 6 GPIO_ACTIVE_HIGH>;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "usb0";
};
usbotg2_vbus: reg_usbotg2_vbus {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&pcf8574a 7 GPIO_ACTIVE_HIGH>;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "usb1";
};
};
&iomuxc {
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10069
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029
>;
};
pinctrl_mdio: mdiogrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0xb0b0 /* RST */
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x4001b8b0
MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x4001b8b0
>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x1b8b0
MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x1b8b0
>;
};
pinctrl_can1: can1grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x1b020
MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x1b020
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1
>;
};
};
&uart1 {
pinctrl-0 = <&pinctrl_uart1>;
pinctrl-names = "default";
status = "okay";
};
&usdhc1 {
bus-width = <4>;
no-1-8-v;
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-names = "default";
status = "okay";
wakeup-source;
};
&fec1 {
phy-handle = <&phy0>;
phy-mode = "rmii";
pinctrl-0 = <&pinctrl_fec1>;
pinctrl-names = "default";
status = "okay";
};
&fec2 {
phy-handle = <&phy1>;
phy-mode = "rmii";
phy-reset-duration = <250>;
phy-reset-post-delay = <100>;
phy-reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pinctrl_fec2 &pinctrl_mdio>;
pinctrl-names = "default";
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
clocks = <&clks IMX6UL_CLK_ENET_REF>;
clock-names = "rmii-ref";
interrupt-parent = <&gpio5>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
pinctrl-0 = <&pinctrl_phy0_irq>;
pinctrl-names = "default";
reg = <0>;
};
phy1: ethernet-phy@1 {
clocks = <&clks IMX6UL_CLK_ENET2_REF>;
clock-names = "rmii-ref";
interrupt-parent = <&gpio5>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
pinctrl-0 = <&pinctrl_phy1_irq>;
pinctrl-names = "default";
reg = <1>;
};
};
};
&usbotg1 {
dr_mode = "host";
status = "okay";
vbus-supply = <&usbotg1_vbus>;
};
&usbotg2 {
dr_mode = "host";
status = "okay";
vbus-supply = <&usbotg2_vbus>;
};
&i2c2 {
clock_frequency = <100000>;
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
pinctrl-names = "default", "gpio";
scl-gpios = <&gpio4 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio4 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
pcf8574a: gpio@38 {
compatible = "nxp,pcf8574a";
#gpio-cells = <2>;
gpio-controller;
reg = <0x38>;
};
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1>;
status = "okay";
};
&uart2 {
linux,rs485-enabled-at-boot-time;
pinctrl-0 = <&pinctrl_uart2>;
pinctrl-names = "default";
status = "okay";
uart-has-rtscts;
};
|
