1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
|
// ***************************************************************************
// ***************************************************************************
// Copyright 2013(c) Analog Devices, Inc.
// Author: Lars-Peter Clausen <lars@metafoo.de>
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
module dmac_src_fifo_inf (
input clk,
input resetn,
input enable,
output enabled,
input sync_id,
output sync_id_ret,
input [ID_WIDTH-1:0] request_id,
output [ID_WIDTH-1:0] response_id,
input eot,
input en,
input [DATA_WIDTH-1:0] din,
output reg overflow,
input sync,
output xfer_req,
input fifo_ready,
output fifo_valid,
output [DATA_WIDTH-1:0] fifo_data,
input req_valid,
output req_ready,
input [BEATS_PER_BURST_WIDTH-1:0] req_last_burst_length,
input req_sync_transfer_start
);
parameter ID_WIDTH = 3;
parameter DATA_WIDTH = 64;
parameter BEATS_PER_BURST_WIDTH = 4;
wire ready;
reg needs_sync = 1'b0;
wire has_sync = ~needs_sync | sync;
wire sync_valid = en & ready & has_sync;
always @(posedge clk)
begin
if (resetn == 1'b0) begin
needs_sync <= 1'b0;
end else begin
if (ready && en && sync) begin
needs_sync <= 1'b0;
end else if (req_valid && req_ready) begin
needs_sync <= req_sync_transfer_start;
end
end
end
always @(posedge clk)
begin
if (resetn == 1'b0) begin
overflow <= 1'b0;
end else begin
if (enable) begin
overflow <= en & ~ready;
end else begin
overflow <= en;
end
end
end
assign sync_id_ret = sync_id;
dmac_data_mover # (
.ID_WIDTH(ID_WIDTH),
.DATA_WIDTH(DATA_WIDTH),
.DISABLE_WAIT_FOR_ID(0),
.BEATS_PER_BURST_WIDTH(BEATS_PER_BURST_WIDTH)
) i_data_mover (
.clk(clk),
.resetn(resetn),
.enable(enable),
.enabled(enabled),
.sync_id(sync_id),
.xfer_req(xfer_req),
.request_id(request_id),
.response_id(response_id),
.eot(eot),
.req_valid(req_valid),
.req_ready(req_ready),
.req_last_burst_length(req_last_burst_length),
.s_axi_ready(ready),
.s_axi_valid(sync_valid),
.s_axi_data(din),
.m_axi_ready(fifo_ready),
.m_axi_valid(fifo_valid),
.m_axi_data(fifo_data),
.m_axi_last()
);
endmodule
|
