1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
|
//
// Copyright 2011-2012 Ettus Research LLC
// Copyright 2018 Ettus Research, a National Instruments Company
//
// SPDX-License-Identifier: LGPL-3.0-or-later
//
//----------------------------------------------------------------------
//-- A settings register is a peripheral for the settings register bus.
//-- When the settings register sees strobe abd a matching address,
//-- the outputs will be become registered to the given input bus.
//----------------------------------------------------------------------
module setting_reg
#(parameter my_addr = 0,
parameter awidth = 8,
parameter width = 32,
parameter at_reset=0)
(input clk, input rst, input strobe, input wire [awidth-1:0] addr,
input wire [31:0] in, output reg [width-1:0] out, output reg changed);
always @(posedge clk)
if(rst)
begin
out <= at_reset;
changed <= 1'b0;
end
else
if(strobe & (my_addr==addr))
begin
out <= in[width-1:0];
changed <= 1'b1;
end
else
changed <= 1'b0;
endmodule // setting_reg
|
