1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
|
//////////////////////////////////////////////////////////////////////////////////
// Copyright Ettus Research LLC
// The ZYNQ FIFO slave readback:
// - implements read state machine for 32-bit addressable AXI slave
// - provides readback for state of per-stream fifo pointers
//////////////////////////////////////////////////////////////////////////////////
module zf_slave_readback
#(
parameter CONFIG_BASE = 32'h40000000
)
(
input clk,
input rst,
//------------------------------------------------------------------
//-- control read signals - slave
//------------------------------------------------------------------
input [31:0] AXI_ARADDR,
input AXI_ARVALID,
output AXI_ARREADY,
output [31:0] AXI_RDATA,
output [1:0] AXI_RRESP,
output AXI_RVALID,
input AXI_RREADY,
//------------------------------------------------------------------
// readback interface
//------------------------------------------------------------------
output reg [31:0] addr,
input [31:0] data,
output strobe,
output [31:0] debug
);
////////////////////////////////////////////////////////////////////////
///////////////////////////// Begin R T L //////////////////////////////
////////////////////////////////////////////////////////////////////////
//------------------------------------------------------------------
// Control read state machine responds to AXI control reads
// Used for reading back the state of the various FIFOs
//------------------------------------------------------------------
localparam STATE_ADDR = 0;
localparam STATE_READ = 1;
localparam STATE_DATA = 2;
reg [3:0] state;
always @(posedge clk) begin
if (rst) begin
state <= STATE_ADDR;
addr <= 0;
end
else case (state)
STATE_ADDR: begin
if (AXI_ARVALID && AXI_ARREADY) begin
state <= STATE_READ;
addr <= (AXI_ARADDR - CONFIG_BASE);
end
end
STATE_READ: begin
state <= STATE_DATA;
end
STATE_DATA: begin
if (AXI_RVALID && AXI_RREADY) begin
state <= STATE_ADDR;
end
end
default: state <= STATE_ADDR;
endcase //state
end
assign strobe = AXI_RVALID && AXI_RREADY;
//readback data
assign AXI_RDATA = data;
//only acking address reads from the wait state
assign AXI_ARREADY = (state == STATE_ADDR);
//when to release outputs from the slave
assign AXI_RVALID = (state == STATE_DATA);
assign AXI_RRESP = 0;
endmodule //zf_slave_readback
|
