1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
module gray_send
#(parameter WIDTH = 8)
(input clk_in, input [WIDTH-1:0] addr_in,
input clk_out, output reg [WIDTH-1:0] addr_out);
reg [WIDTH-1:0] gray_clkin, gray_clkout, gray_clkout_d1;
wire [WIDTH-1:0] gray, bin;
bin2gray #(.WIDTH(WIDTH)) b2g (.bin(addr_in), .gray(gray) );
always @(posedge clk_in)
gray_clkin <= gray;
always @(posedge clk_out)
gray_clkout <= gray_clkin;
always @(posedge clk_out)
gray_clkout_d1 <= gray_clkout;
gray2bin #(.WIDTH(WIDTH)) g2b (.gray(gray_clkout_d1), .bin(bin) );
// FIXME we may not need the next register, but it may help timing
always @(posedge clk_out)
addr_out <= bin;
endmodule // gray_send
|
