1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
|
//
// Copyright 2019 Ettus Research, A National Instruments Company
//
// SPDX-License-Identifier: LGPL-3.0-or-later
//
// Module: ctrlport_terminator.v
// Description:
// Returns an error for all ctrlport requests in given address range.
module ctrlport_terminator #(
parameter START_ADDRESS = 0, // first address to generate response for
parameter LAST_ADDRESS = 32 // last address (including) to generate response for
)(
//---------------------------------------------------------------
// ControlPort slave
//---------------------------------------------------------------
input wire ctrlport_clk,
input wire ctrlport_rst,
input wire s_ctrlport_req_wr,
input wire s_ctrlport_req_rd,
input wire [19:0] s_ctrlport_req_addr,
input wire [31:0] s_ctrlport_req_data,
output reg s_ctrlport_resp_ack,
output wire [ 1:0] s_ctrlport_resp_status,
output wire [31:0] s_ctrlport_resp_data
);
`include "../core/ctrlport.vh"
//vhook_nowarn s_ctrlport_req_addr
//vhook_nowarn s_ctrlport_req_data
// drive acknowledgement on requests but not on reset
always @(posedge ctrlport_clk) begin
if (ctrlport_clk) begin
if (ctrlport_rst) begin
s_ctrlport_resp_ack <= 1'b0;
end else if ((s_ctrlport_req_addr >= START_ADDRESS) && (s_ctrlport_req_addr <= LAST_ADDRESS)) begin
s_ctrlport_resp_ack <= s_ctrlport_req_wr | s_ctrlport_req_rd;
end else begin
s_ctrlport_resp_ack <= 1'b0;
end
end
end
// other outputs are fixed
assign s_ctrlport_resp_status = CTRL_STS_CMDERR;
assign s_ctrlport_resp_data = { CTRLPORT_DATA_W {1'b0}};
endmodule
|
