1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
|
//
// Copyright 2021 Ettus Research, a National Instruments Brand
//
// SPDX-License-Identifier: LGPL-3.0-or-later
//
// Module: capture_sysref
//
// Description:
//
// Capture SYSREF and transfer it to the higher clock domain.
// For X410, module incurs in 2 pll_ref_clk cycles + 1 rfdc_clk
// cycle of delay. For X440, module synchronizes to each
// pll_ref_clk and rfdc_clk separately, incurring in 2 cycles
// for each clock.
//
// Parameters:
//
// DEVICE_TYPE : Type of device for which SYSREF is synchronized.
//
module capture_sysref (
// Clocks
input wire pll_ref_clk,
input wire rfdc_clk,
// SYSREF input and control
input wire sysref_in, // Single-ended SYSREF (previously buffered)
input wire enable_rclk, // Enables SYSREF output in the rfdc_clk domain.
// Captured SYSREF outputs
output wire sysref_out_pclk, // Debug output (Domain: pll_ref_clk).
output wire sysref_out_rclk // RFDC output (Domain: rfdc_clk).
);
(* ASYNC_REG = "TRUE" *) reg sysref_pclk_ms = 1'b0;
reg sysref_pclk = 1'b0;
reg sysref_rclk = 1'b0;
// Capture SYSREF synchronously with the pll_ref_clk, but double-sync it just
// in case static timing isn't met so as not to destroy downstream logic.
always @ (posedge pll_ref_clk) begin
sysref_pclk_ms <= sysref_in;
sysref_pclk <= sysref_pclk_ms;
end
assign sysref_out_pclk = sysref_pclk;
// Transfer to faster clock which is edge-aligned with the pll_ref_clk.
always @ (posedge rfdc_clk) begin
if (enable_rclk) begin
sysref_rclk <= sysref_pclk;
end else begin
sysref_rclk <= 1'b0;
end
end
assign sysref_out_rclk = sysref_rclk;
endmodule
|
