1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304
|
/*
Copyright (c) 1990-2007 Info-ZIP. All rights reserved.
See the accompanying file LICENSE, version 2000-Apr-09 or later
(the contents of which are also included in zip.h) for terms of use.
If, for some reason, all these files are missing, the Info-ZIP license
also may be found at: ftp://ftp.info-zip.org/pub/infozip/license.html
*/
/*
* crc_i386.S, optimized CRC calculation function for Zip and UnZip,
* created by Paul Kienitz and Christian Spieler. Last revised 07 Jan 2007.
*
* GRR 961110: incorporated Scott Field optimizations from win32/crc_i386.asm
* => overall 6% speedup in "unzip -tq" on 9MB zipfile (486-66)
*
* SPC 970402: revised for Rodney Brown's optimizations (32-bit-wide
* aligned reads for most of the data from buffer), can be
* disabled by defining the macro NO_32_BIT_LOADS
*
* SPC 971012: added Rodney Brown's additional tweaks for 32-bit-optimized
* CPUs (like the Pentium Pro, Pentium II, and probably some
* Pentium clones). This optimization is controlled by the
* preprocessor switch "__686" and is disabled by default.
* (This default is based on the assumption that most users
* do not yet work on a Pentium Pro or Pentium II machine ...)
*
* COS 050116: Enabled the 686 build by default, because there are hardly any
* pre-686 CPUs in serious use nowadays. (See SPC 970402 above.)
*
* SPC 060103: Updated code to incorporate newer optimizations found in zlib.
*
* SPC 070107: Added conditional switch to deactivate crc32() compilation.
*
* FLAT memory model assumed. Calling interface:
* - args are pushed onto the stack from right to left,
* - return value is given in the EAX register,
* - all other registers (with exception of EFLAGS) are preserved. (With
* GNU C 2.7.x, %edx and %ecx are `scratch' registers, but preserving
* them nevertheless adds only 4 single byte instructions.)
*
* This source generates the function
* ulg crc32(ulg crc, ZCONST uch *buf, extent len).
*
* Loop unrolling can be disabled by defining the macro NO_UNROLLED_LOOPS.
* This results in shorter code at the expense of reduced performance.
*/
/* This file is NOT used in conjunction with zlib, or when only creation of
* the basic CRC_32_Table (for other purpose) is requested.
*/
#if !defined(USE_ZLIB) && !defined(CRC_TABLE_ONLY)
/* Preprocess with -DNO_UNDERLINE if your C compiler does not prefix
* external symbols with an underline character '_'.
*/
#if defined(NO_UNDERLINE) || defined(__ELF__)
# define _crc32 crc32
# define _get_crc_table get_crc_table
#endif
/* Use 16-byte alignment if your assembler supports it. Warning: gas
* uses a log(x) parameter (.align 4 means 16-byte alignment). On SVR4
* the parameter is a number of bytes.
*/
#ifndef ALIGNMENT
# define ALIGNMENT .align 4,0x90
#endif
#if defined(i386) || defined(_i386) || defined(_I386) || defined(__i386)
/* This version is for 386 Unix, OS/2, MSDOS in 32 bit mode (gcc & gas).
* Warning: it uses the AT&T syntax: mov source,dest
* This file is only optional. If you want to use the C version,
* remove -DASM_CRC from CFLAGS in Makefile and set OBJA to an empty string.
*/
.file "crc_i386.S"
#if !defined(PRE_686) && !defined(__686)
/* Optimize for Pentium Pro and compatible CPUs by default. */
# define __686
#endif
#if defined(NO_STD_STACKFRAME) && defined(USE_STD_STACKFRAME)
# undef USE_STACKFRAME
#else
/* The default is to use standard stack frame entry, because it
* results in smaller code!
*/
# ifndef USE_STD_STACKFRAME
# define USE_STD_STACKFRAME
# endif
#endif
#ifdef USE_STD_STACKFRAME
# define _STD_ENTRY pushl %ebp ; movl %esp,%ebp
# define arg1 8(%ebp)
# define arg2 12(%ebp)
# define arg3 16(%ebp)
# define _STD_LEAVE popl %ebp
#else /* !USE_STD_STACKFRAME */
# define _STD_ENTRY
# define arg1 24(%esp)
# define arg2 28(%esp)
# define arg3 32(%esp)
# define _STD_LEAVE
#endif /* ?USE_STD_STACKFRAME */
/*
* These two (three) macros make up the loop body of the CRC32 cruncher.
* registers modified:
* eax : crc value "c"
* esi : pointer to next data byte (or lword) "buf++"
* registers read:
* edi : pointer to base of crc_table array
* scratch registers:
* ebx : index into crc_table array
* (requires upper three bytes = 0 when __686 is undefined)
*/
#ifndef __686 /* optimize for 386, 486, Pentium */
#define Do_CRC /* c = (c >> 8) ^ table[c & 0xFF] */\
movb %al, %bl ;/* tmp = c & 0xFF */\
shrl $8, %eax ;/* c = (c >> 8) */\
xorl (%edi, %ebx, 4), %eax ;/* c ^= table[tmp] */
#else /* __686 : optimize for Pentium Pro and compatible CPUs */
#define Do_CRC /* c = (c >> 8) ^ table[c & 0xFF] */\
movzbl %al, %ebx ;/* tmp = c & 0xFF */\
shrl $8, %eax ;/* c = (c >> 8) */\
xorl (%edi, %ebx, 4), %eax ;/* c ^=table[tmp] */
#endif /* ?__686 */
#define Do_CRC_byte /* c = (c >> 8) ^ table[(c^*buf++)&0xFF] */\
xorb (%esi), %al ;/* c ^= *buf */\
incl %esi ;/* buf++ */\
Do_CRC
#define Do_CRC_byteof(ofs) /* c = (c >> 8) ^ table[(c^*buf++)&0xFF] */\
xorb ofs(%esi), %al ;/* c ^= *buf */\
incl %esi ;/* buf++ */\
Do_CRC
#ifndef NO_32_BIT_LOADS
# ifdef IZ_CRCOPTIM_UNFOLDTBL
/* the edx register is needed in crc calculation */
# define SavLen arg3
# define UpdCRC_lword \
movzbl %al, %ebx ; \
movl 3072(%edi,%ebx,4), %edx ; \
movzbl %ah, %ebx ; \
shrl $16, %eax ; \
xor 2048(%edi,%ebx,4), %edx ; \
movzbl %al, %ebx ; \
shrl $8,%eax ; \
xorl 1024(%edi,%ebx,4), %edx ; \
movl (%edi,%eax,4), %eax ; \
xorl %edx,%eax ;
# define UpdCRC_lword_sh(dwPtrIncr) \
movzbl %al, %ebx ; \
movl 3072(%edi,%ebx,4), %edx ; \
movzbl %ah, %ebx ; \
shrl $16, %eax ; \
xor 2048(%edi,%ebx,4), %edx ; \
movzbl %al, %ebx ; \
addl $4*(dwPtrIncr), %esi ;/* ((ulg *)buf)+=dwPtrIncr */\
shrl $8,%eax ; \
xorl 1024(%edi,%ebx,4), %edx ; \
movl (%edi,%eax,4),%eax ; \
xorl %edx,%eax ;
# else /* !IZ_CRCOPTIM_UNFOLDTBL */
/* the edx register is not needed anywhere else */
# define SavLen %edx
# define UpdCRC_lword \
Do_CRC \
Do_CRC \
Do_CRC \
Do_CRC
# define UpdCRC_lword_sh(dwPtrIncr) \
Do_CRC \
Do_CRC \
addl $4*(dwPtrIncr), %esi ;/* ((ulg *)buf)++ */\
Do_CRC \
Do_CRC
# endif /* ?IZ_CRCOPTIM_UNFOLDTBL */
#define Do_CRC_lword \
xorl (%esi), %eax ;/* c ^= *(ulg *)buf */\
UpdCRC_lword_sh(1) /* ... ((ulg *)buf)++ */
#define Do_CRC_4lword \
xorl (%esi), %eax ;/* c ^= *(ulg *)buf */\
UpdCRC_lword \
xorl 4(%esi), %eax ;/* c ^= *((ulg *)buf+1) */\
UpdCRC_lword \
xorl 8(%esi), %eax ;/* c ^= *((ulg *)buf+2) */\
UpdCRC_lword \
xorl 12(%esi), %eax ;/* c ^= *((ulg *)buf]+3 */\
UpdCRC_lword_sh(4) /* ... ((ulg *)buf)+=4 */
#endif /* !NO_32_BIT_LOADS */
.text
.globl _crc32
_crc32: /* ulg crc32(ulg crc, uch *buf, extent len) */
_STD_ENTRY
pushl %edi
pushl %esi
pushl %ebx
pushl %edx
pushl %ecx
movl arg2, %esi /* 2nd arg: uch *buf */
subl %eax, %eax /* > if (!buf) */
testl %esi, %esi /* > return 0; */
jz .L_fine /* > else { */
call _get_crc_table
movl %eax, %edi
movl arg1, %eax /* 1st arg: ulg crc */
#ifndef __686
subl %ebx, %ebx /* ebx=0; bl usable as dword */
#endif
movl arg3, %ecx /* 3rd arg: extent len */
notl %eax /* > c = ~crc; */
testl %ecx, %ecx
#ifndef NO_UNROLLED_LOOPS
jz .L_bail
# ifndef NO_32_BIT_LOADS
/* Assert now have positive length */
.L_align_loop:
testl $3, %esi /* Align buf on lword boundary */
jz .L_aligned_now
Do_CRC_byte
decl %ecx
jnz .L_align_loop
.L_aligned_now:
# endif /* !NO_32_BIT_LOADS */
movl %ecx, SavLen /* save current value of len */
shrl $4, %ecx /* ecx = len / 16 */
jz .L_No_Sixteens
/* align loop head at start of 486 internal cache line !! */
ALIGNMENT
.L_Next_Sixteen:
# ifndef NO_32_BIT_LOADS
Do_CRC_4lword
# else /* NO_32_BIT_LOADS */
Do_CRC_byteof(0)
Do_CRC_byteof(1)
Do_CRC_byteof(2)
Do_CRC_byteof(3)
Do_CRC_byteof(4)
Do_CRC_byteof(5)
Do_CRC_byteof(6)
Do_CRC_byteof(7)
Do_CRC_byteof(8)
Do_CRC_byteof(9)
Do_CRC_byteof(10)
Do_CRC_byteof(11)
Do_CRC_byteof(12)
Do_CRC_byteof(13)
Do_CRC_byteof(14)
Do_CRC_byteof(15)
addl $16,%esi ;/* buf += 16 */
# endif /* ?NO_32_BIT_LOADS */
decl %ecx
jnz .L_Next_Sixteen
.L_No_Sixteens:
movl SavLen, %ecx
andl $15, %ecx /* ecx = len % 16 */
# ifndef NO_32_BIT_LOADS
shrl $2,%ecx /* ecx = len / 4 */
jz .L_No_Fours
.L_Next_Four:
Do_CRC_lword
decl %ecx
jnz .L_Next_Four
.L_No_Fours:
movl SavLen,%ecx
andl $3,%ecx /* ecx = len % 4 */
# endif /* !NO_32_BIT_LOADS */
#endif /* !NO_UNROLLED_LOOPS */
jz .L_bail /* > if (len) */
/* align loop head at start of 486 internal cache line !! */
ALIGNMENT
.L_loupe: /* > do { */
Do_CRC_byte /* c = CRC32(c,*buf++,crctab);*/
decl %ecx /* > } while (--len); */
jnz .L_loupe
.L_bail: /* > } */
notl %eax /* > return ~c; */
.L_fine:
popl %ecx
popl %edx
popl %ebx
popl %esi
popl %edi
_STD_LEAVE
ret
#else
error: this asm version is for 386 only
#endif /* i386 || _i386 || _I386 || __i386 */
#endif /* !USE_ZLIB && !CRC_TABLE_ONLY */
|