#!/usr/bin/tclsh

# Wrapper (tcl) for usb_modeswitch, called from
# /lib/udev/rules.d/40-usb_modeswitch.rules
# (part of data pack "usb-modeswitch-data") via
# /lib/udev/usb_modeswitch
#
# Does ID check on newly discovered USB devices and calls
# the mode switching program with the matching parameter
# file from /usr/share/usb_modeswitch
#
# Part of usb-modeswitch-1.2.3 package
# (C) Josua Dietze 2009-2012

set arg0 [lindex $argv 0]
if [regexp {\.tcl$} $arg0] {
	if [file exists $arg0] {
		set argv [lrange $argv 1 end]
		source $arg0
		exit
	}
}

# Setting of these switches is done in the global config
# file (/etc/usb_modeswitch.conf) if available

set flags(logging) 0
set flags(noswitching) 0

#set env(PATH) "/bin:/sbin:/usr/bin:/usr/sbin"

# Execution starts at file bottom

proc {Main} {argv argc} {

global scsi usb config match device flags settings

set loginit [ParseGlobalConfig]

# The facility to add a symbolic link pointing to the
# ttyUSB port which provides interrupt transfer, i.e.
# the port to connect through.
# Will check for interrupt endpoint in ttyUSB port (lowest if
# there is more than one); if found, return "gsmmodem[n]" name
# to udev for symlink creation

# This is run once for every port of LISTED devices by
# an udev rule

if {[lindex $argv 0] == "--symlink-name"} {
	puts -nonewline [SymLinkName [lindex $argv 1]]
	SafeExit
}

set argList [split [lindex $argv 1] /]

if [string length [lindex $argList 1]] {
	set device [lindex $argList 1]
} else {
	set device "noname"
}

Log "Raw args from udev: [lindex $argv 1]\n\n$loginit"

if {$device == "noname"} {
	Log "No data from udev. Exiting"
	SafeExit
}

if {[lindex $argv 0] != "--switch-mode"} {
	Log "No command given. Exiting"
	SafeExit
}

if {![regexp /lib/udev/usb_modeswitch [lindex $argv 2]]} {
	Log "Dispatcher was not run from call script. Exiting"
	SafeExit
}

set settings(dbdir)	/usr/share/usb_modeswitch
set settings(dbdir_etc)	/etc/usb_modeswitch.d


if {![file exists $settings(dbdir)] && ![file exists $settings(dbdir_etc)]} {
	Log "Error: no config database found in /usr/share or /etc. Exiting"
	SafeExit
}
set bindir /usr/sbin

set devList1 {}
set devList2 {}


# arg 0: the bus id for the device (udev: %b)
# arg 1: the "kernel name" for the device (udev: %k)
#
# Both together give the top directory where the path
# to the SCSI attributes can be determined (further down)
# Addendum: older kernel/udev version seem to differ in
# providing these attributes - or not. So more probing
# is needed

if {[string length [lindex $argList 0]] == 0} {
	if {[string length [lindex $argList 1]] == 0} {
		Log "No device number values given from udev! Exiting"
		SafeExit
	} else {
		if {![regexp {(.*?):} [lindex $argList 1] d dev_top]} {
			Log "Could not determine top device dir from udev values! Exiting"
			SafeExit
		}
	}
} else {
	set dev_top [lindex $argList 0]
	regexp {(.*?):} $dev_top d dev_top
}

set devdir /sys/bus/usb/devices/$dev_top
if {![file isdirectory $devdir]} {
	Log "Top device directory not found ($devdir)! Exiting"
	SafeExit
}
Log "Using top device dir $devdir"
set ifdir "[file tail $devdir]:1.0"


# Mapping of the short string identifiers (in the config
# file names) to the long name used here
#
# If we need them it's a snap to add new attributes here!

set match(sVe) scsi(vendor)
set match(sMo) scsi(model)
set match(sRe) scsi(rev)
set match(uMa) usb(manufacturer)
set match(uPr) usb(product)
set match(uSe) usb(serial)


# Now reading the USB attributes
if {![ReadUSBAttrs $devdir]} {
	Log "USB attributes not found in sysfs tree. Exiting"
	SafeExit
}

if $flags(logging) {
	Log "----------------\nUSB values from sysfs:"
	foreach attr {manufacturer product serial} {
		Log "  $attr\t$usb($attr)"
	}
	Log "----------------"
}

if $flags(noswitching) {
	Log "\nSwitching globally disabled. Exiting\n"
	SysLog "usb_modeswitch: switching disabled, no action for $usb(idVendor):$usb(idProduct)"
	SafeExit
}

if {$usb(bNumConfigurations) == "1"} {
	set configParam "-u -1"
	Log "bNumConfigurations is 1 - don't check for active configuration"
} else {
	set configParam ""
}

# Check if there is more than one config file for this USB ID,
# which would make an attribute test necessary. If so, check if
# SCSI values are needed

set configList [ConfigGet conflist $usb(idVendor):$usb(idProduct)]

if {[llength $configList] == 0} {
	Log "Aargh! Config file missing for $usb(idVendor):$usb(idProduct)! Exiting"
	SafeExit
}

set scsiNeeded 0
if {[llength $configList] > 1} {
	if [regexp {:s} $configList] {
		set scsiNeeded 1
	}
}
if $scsiNeeded {
	if [ReadSCSIAttrs $devdir:1.0] {
		Log "----------------\nSCSI values from sysfs:"
		foreach attr {vendor model rev} {
			Log " $attr\t$scsi($attr)"
		}
		Log "----------------"
	} else {
		Log "Could not get SCSI attributes, exclude devices with SCSI match"
	}
} else {
	Log "SCSI attributes not needed, moving on"
}

# General wait - this is important
after 500

# Now check for a matching config file. Matching is done
# by MatchDevice

set report {}
foreach configuration $configList {

	# skipping installer leftovers
	if [regexp {\.(dpkg|rpm)} $configuration] {continue}

	Log "checking config: $configuration"
	if [MatchDevice $configuration] {
		Log "! matched. Reading config data"
		if [string length $usb(busnum)] {
			set busParam "-b [string trimleft $usb(busnum) 0]"
			set devParam "-g [string trimleft $usb(devnum) 0]"
		} else {
			set busParam ""
			set devParam ""
		}
		set configBuffer [ConfigGet conffile $configuration]
		ParseDeviceConfig $configBuffer
		if {$config(waitBefore) == ""} {
		} else {
			Log " waiting time set to $config(waitBefore) seconds"
			append config(waitBefore) "000"
			after $config(waitBefore)
			Log " waiting is over, switching starts now"
		}

		# Now we are actually switching
		if $flags(logging) {
			Log "Command to be run:\nusb_modeswitch -I -W -D -s 20 $configParam $busParam $devParam -v $usb(idVendor) -p $usb(idProduct) -f \$configBuffer"
			set report [exec /usr/sbin/usb_modeswitch -I -W -D -s 20 $configParam $busParam $devParam -v $usb(idVendor) -p $usb(idProduct) -f "$configBuffer" 2>@ stdout]
			Log "\nVerbose debug output of usb_modeswitch and libusb follows"
			Log "(Note that some USB errors are to be expected in the process)"
			Log "--------------------------------"
			Log $report
			Log "--------------------------------"
			Log "(end of usb_modeswitch output)\n"
		} else {
			set report [exec /usr/sbin/usb_modeswitch -I -Q -D -s 20 $configParam $busParam $devParam -v $usb(idVendor) -p $usb(idProduct) -f "$configBuffer" 2>@ stdout]
		}
		break
	} else {
		Log "* no match, not switching with this config"
	}
}

# Switching is complete; success checking was either
# done by usb_modeswitch and logged via syslog OR bus/dev
# parameter were used; then we do check for success HERE

if [regexp {ok:busdev} $report] {
	if [CheckSuccess $devdir] {
		Log "Mode switching was successful, found $usb(idVendor):$usb(idProduct) ($usb(manufacturer): $usb(product))"
		SysLog "usb_modeswitch: switched to $usb(idVendor):$usb(idProduct) on [format %03d $usb(busnum)]/[format %03d $usb(devnum)]"
	} else {
		Log "\nTarget config not matching - current values are"
		set attrList {idVendor idProduct bConfigurationValue manufacturer product serial}
		foreach attr [lsort [array names usb]] {
			Log "    [format %-26s $attr:] $usb($attr)"
		}
		Log "\nMode switching may have failed. Exiting\n"
		SafeExit
	}
} else {
	if {![file isdirectory $devdir]} {
		Log "Device directory in sysfs is gone! Something went wrong, aborting"
		SafeExit
	}
	if {![regexp {ok:} $report]} {
		Log "\nCore program reported switching failure. Exiting\n"
		SafeExit
	}
	# Give the device another second if it's not fully back yet
	if {![file exists $devdir/idProduct]} {
		after 1000
	}
	ReadUSBAttrs $devdir $ifdir
}

# Now checking for bound drivers (only for class 0xff)

if {$usb($ifdir/bInterfaceClass) != "" && [regexp {ok:} $report]} {
	if {$usb($ifdir/bInterfaceClass) != "ff"} {
		set config(driverModule) ""
		Log " No vendor-specific class found, skip driver checking"
	}
}

# If module is set (it is by default), driver shall be loaded.
# If not, then NoDriverLoading is active

if {$config(driverModule) != ""} {
	if {[string length "$usb(idVendor)$usb(idProduct)"] < 8} {
		if {![regexp {ok:(\w{4}):(\w{4})} $report d usb(idVendor) usb(idProduct)]} {
			Log "No target vendor/product ID found or given, can't continue. Aborting"
			SafeExit
		}
	}
	# wait for any drivers to bind automatically
	after 1000
	Log "Now checking for bound driver ..."
	if {![file exists $devdir/$ifdir/driver]} {
		Log " no driver has bound to interface 0 yet"
		AddToList link_list $usb(idVendor):$usb(idProduct)

		# If device is known, the sh wrapper will take care, else:
		if {[InBindList $usb(idVendor):$usb(idProduct)] == 0} {
			Log "Device is not in \"bind_list\" yet, bind it now"

			# Load driver
			CheckDriverBind $usb(idVendor) $usb(idProduct)

			# Old/slow systems may take a while to create the devices
			set counter 0
			while {![file exists $devdir/$ifdir/driver]} {
				if {$counter == 14} {break}
				after 500
				incr counter
			}
			if {$counter == 14} {
				Log " driver binding failed"
			} else {
				Log " driver was bound to the device"
				AddToList bind_list $usb(idVendor):$usb(idProduct)
			}
		}
	} else {
		Log " driver has bound, device is known"
		if {[llength [glob -nocomplain $devdir/$ifdir/ttyUSB*]] > 0} {
			AddToList link_list $usb(idVendor):$usb(idProduct)
		}
	}
} else {
	# Just in case "NoDriverLoading" was added after the first bind
	RemoveFromBindList $usb(idVendor):$usb(idProduct)
}

if [regexp {ok:$} $report] {
	# "NoDriverLoading" was set
	Log "Doing no driver checking or binding for this device"
}

# In newer kernels there is a switch to avoid the use of a device
# reset (e.g. from usb-storage) which would possibly switch back
# a mode-switching device to initial mode
if [regexp {ok:} $report] {
	Log "Checking for AVOID_RESET_QUIRK kernel attribute"
	if [file exists $devdir/avoid_reset_quirk] {
		if [catch {exec echo "1" >$devdir/avoid_reset_quirk 2>/dev/null} err] {
			Log " Error setting the attribute: $err"
		} else {
			Log " AVOID_RESET_QUIRK activated"
		}
	} else {
		Log " not present in this kernel"
	}
}

Log "\nAll done, exiting\n"
SafeExit

}
# end of proc {Main}


proc {ReadSCSIAttrs} {topdir} {

global scsi
set counter 0
set sysdir $topdir
Log "Checking storage tree in sysfs ..."
while {$counter < 20} {
	Log " loop $counter/20"
	if {![file isdirectory $sysdir]} {
		# Device is gone. Unplugged? Switched by kernel?
		Log " sysfs device tree is gone; abort SCSI value check"
		return 0
	}
	# Searching the storage/SCSI tree; might take a while
	if {[set dirList [glob -nocomplain $topdir/host*]] != ""} {
		set sysdir [lindex $dirList 0]
		if {[set dirList [glob -nocomplain $sysdir/target*]] != ""} {
			set sysdir [lindex $dirList 0]
			regexp {.*target(.*)} $sysdir d subdir
			if {[set dirList [glob -nocomplain $sysdir/$subdir*]] != ""} {
				set sysdir [lindex $dirList 0]
				if [file exists $sysdir/vendor] {
					Log " Storage tree is ready"
					break
				}
			}
		}
	}
	after 500
	incr counter
}
if {$counter == 20} {
	Log "SCSI tree not found; you may want to check if this path/file exists:"
	Log "$sysdir/vendor\n"
	return 0
}

Log "Reading SCSI values ..."
foreach attr {vendor model rev} {
	if [file exists $sysdir/$attr] {
		set rc [open $sysdir/$attr r]
		set scsi($attr) [read -nonewline $rc]
		close $rc
	} else {
		set scsi($attr) ""
		Log "Warning: SCSI attribute \"$attr\" not found."
	}
}
return 1

}
# end of proc {ReadSCSIAttrs}


proc {ReadUSBAttrs} {dir args} {

global usb

set attrList {idVendor idProduct bConfigurationValue manufacturer product serial devnum busnum bNumConfigurations}
set mandatoryList {idVendor idProduct bNumConfigurations}
set result 1
if {$args != ""} {
	lappend attrList "$args/bInterfaceClass"
	lappend mandatoryList "$args/bInterfaceClass"
}
foreach attr $attrList {
	if [file exists $dir/$attr] {
		set rc [open $dir/$attr r]
		set usb($attr) [string trim [read -nonewline $rc]]
		close $rc
	} else {
		set usb($attr) ""
		if {[lsearch $mandatoryList $attr] > -1} {
			set result 0
		}
		if {$attr == "serial"} {continue}
		Log "   Warning: USB attribute \"$attr\" not found"
	}
}
return $result

}
# end of proc {ReadUSBAttrs}


proc {MatchDevice} {config} {

global scsi usb match

set devinfo [file tail $config]
set infoList [split $devinfo :]
set stringList [lrange $infoList 2 end]
if {[llength $stringList] == 0} {return 1}

foreach teststring $stringList {
	if {$teststring == "?"} {return 0}
	set tokenList [split $teststring =]
	set id [lindex $tokenList 0]
	set matchstring [lindex $tokenList 1]
	set blankstring ""
	regsub -all {_} $matchstring { } blankstring
	Log "matching $match($id)"
	Log "  match string1 (exact):  $matchstring"
	Log "  match string2 (blanks): $blankstring"
	Log " device string: [set $match($id)]"
	if {!([string match *$matchstring* [set $match($id)]] || [string match *$blankstring* [set $match($id)]])} {
		return 0
	}
}
return 1

}
# end of proc {MatchDevice}


proc {ParseGlobalConfig} {} {

global flags
set configFile ""
set places [list /etc/usb_modeswitch.conf /etc/sysconfig/usb_modeswitch /etc/default/usb_modeswitch]
foreach cfg $places {
	if [file exists $cfg] {
		set configFile $cfg
		break
	}
}
if {$configFile == ""} {return}

set rc [open $configFile r]
while {![eof $rc]} {
	gets $rc line
	if [regexp {DisableSwitching\s*=\s*([^\s]+)} $line d val] {
		if [regexp -nocase {1|yes|true} $val] {
			set flags(noswitching) 1
		}
	}
	if [regexp {EnableLogging\s*=\s*([^\s]+)} $line d val] {
		if [regexp -nocase {1|yes|true} $val] {
			set flags(logging) 1
		}
	}

}
return "Using global config file: $configFile"

}
# end of proc {ParseGlobalConfig}


proc ParseDeviceConfig {configContent} {

global config
set config(driverModule) ""
set config(driverIDPath) ""
set config(waitBefore) ""
set config(targetVendor) ""
set config(targetProduct) ""
set config(targetClass) ""
set config(Configuration) ""
set config(checkSuccess) 20
set loadDriver 1

if [regexp -line {^[^#]*?TargetVendor.*?=.*?0x(\w+).*?$} $configContent d config(targetVendor)] {
	Log "config: TargetVendor set to $config(targetVendor)"
}
if [regexp -line {^[^#]*?TargetProduct.*?=.*?0x(\w+).*?$} $configContent d config(targetProduct)] {
	Log "config: TargetProduct set to $config(targetProduct)"
}
if [regexp -line {^[^#]*?TargetProductList.*?=.*?"([0-9a-fA-F,]+).*?$} $configContent d config(targetProduct)] {
	Log "config: TargetProductList set to $config(targetProduct)"
}
if [regexp -line {^[^#]*?TargetClass.*?=.*?0x(\w+).*?$} $configContent d config(targetClass)] {
	Log "config: TargetClass set to $config(targetClass)"
}
if [regexp -line {^[^#]*?Configuration.*?=.*?([0-9]+).*?$} $configContent d config(Configuration)] {
	Log "config: Configuration (target) set to $config(Configuration)"
}
if [regexp -line {^[^#]*?DriverModule.*?=.*?(\w+).*?$} $configContent d config(driverModule)] {
	Log "config: DriverModule set to $config(driverModule)"
}
if [regexp -line {^[^#]*?DriverIDPath.*?=.*?"?([/\-\w]+).*?$} $configContent d config(driverIDPath)] {
	Log "config: DriverIDPath set to $config(driverIDPath)"
}
if [regexp -line {^[^#]*?CheckSuccess.*?=.*?([0-9]+).*?$} $configContent d config(checkSuccess)] {
	Log "config: CheckSuccess set to $config(checkSuccess)"
}
if [regexp -line {^[^#]*?WaitBefore.*?=.*?([0-9]+).*?$} $configContent d config(waitBefore)] {
	Log "config: WaitBefore set to $config(waitBefore)"
}
if [regexp -line {^[^#]*?NoDriverLoading.*?=.*?(1|yes|true).*?$} $configContent] {
	set loadDriver 0
	Log "config: NoDriverLoading is set to active"
}

# For general driver loading; TODO: add respective device names.
# Presently only useful for HSO devices (which are recounted now)
if $loadDriver {
	if {$config(driverModule) == ""} {
		set config(driverModule) "option"
		set config(driverIDPath) "/sys/bus/usb-serial/drivers/option1"
	} else {
		if {$config(driverIDPath) == ""} {
			set config(driverIDPath) "/sys/bus/usb/drivers/$config(driverModule)"
		}
	}
	Log "Driver module is \"$config(driverModule)\", ID path is $config(driverIDPath)\n"
} else {
	Log "Driver will not be handled by usb_modeswitch"
}
set config(waitBefore) [string trimleft $config(waitBefore) 0]

}
# end of proc {ParseDeviceConfig}


proc ConfigGet {command config} {

global settings

switch $command {

	conflist {
		# Unpackaged configs first; sorting is essential for priority
		set configList [lsort -decreasing [glob -nocomplain $settings(dbdir_etc)/$config*]]
		set configList [concat $configList [lsort -decreasing [glob -nocomplain $settings(dbdir)/$config*]]]
		if [file exists $settings(dbdir)/configPack.tar.gz] {
			Log "Found packed config collection $settings(dbdir)/configPack.tar.gz"
			if [catch {set packedList [exec tar -tzf $settings(dbdir)/configPack.tar.gz 2>/dev/null]} err] {
				Log "Error: problem opening config package; tar returned\n $err"
				return {}
			}
			set packedList [split $packedList \n]
			set packedConfigList [lsort -decreasing [lsearch -glob -all -inline $packedList $config*]]
			# Now add packaged configs with a mark, again sorted for priority
			foreach packedConfig $packedConfigList {
				lappend configList "pack/$packedConfig"
			}
		}

		return $configList
	}
	conffile {
		if [regexp {^pack/} $config] {
			set config [regsub {pack/} $config {}]
			Log "Extracting config $config from collection $settings(dbdir)/configPack.tar.gz"
			set configContent [exec tar -xzOf $settings(dbdir)/configPack.tar.gz $config 2>/dev/null]
		} else {
			if [regexp [list $settings(dbdir_etc)] $config] {
				Log "Using config file from override folder $settings(dbdir_etc)"
				SysLog "usb_modeswitch: using overriding config file $config; make sure this is intended"
				SysLog "usb_modeswitch: please report any new or corrected settings; otherwise, check for outdated files"
			}
			set rc [open $config r]
			set configContent [read $rc]
			close $rc
		}
		return $configContent
	}
}

}
# end of proc {ConfigGet}

proc {Log} {msg} {

global flags device
if {$flags(logging) == 0} {return}

if {![info exists flags(wc)]} {
	if [catch {set flags(wc) [open /var/log/usb_modeswitch_$device w]} err] {
		if [catch {set flags(wc) [open /dev/console w]} err] {
			set flags(wc) "error"
			return
		} else {
			puts $flags(wc) "Error opening log file ($err), redirect to console"
		}
	}
	puts $flags(wc) "\n\nUSB_ModeSwitch log from [clock format [clock seconds]]\n"
}
if {$flags(wc) == "error"} {return}
puts $flags(wc) $msg

}
# end of proc {Log}


# Closing the log file if open and exit
proc {SafeExit} {} {

global flags
if [info exists flags(wc)] {
	catch {close $flags(wc)}
}
exit

}
# end of proc {SafeExit}


proc {SymLinkName} {path} {
global device

proc {hasInterrupt} {ifDir} {
	if {[llength [glob -nocomplain $ifDir/ttyUSB*]] == 0} {
		Log "  no ttyUSB interface - skip checking endpoints"
		return 0
	}
	foreach epDir [glob -nocomplain $ifDir/ep_*] {
		set e [file tail $epDir]
		Log "  checking $e ..."
		if [file exists $epDir/type] {
			set rc [open $epDir/type r]
			set type [read $rc]
			close $rc
			if [regexp {Interrupt} $type] {
				Log "  $e has interrupt transfer type"
				return 1
			}
		}
	}
	return 0
}

set loginit "usb_modeswitch called with --symlink-name\n parameter: $path\n"

# In case the device path is returned as /class/tty/ttyUSB,
# get the USB device path from linked tree "device"
set linkpath /sys$path/device
if [file exists $linkpath] {
	if {[file type $linkpath] == "link"} {
		set rawpath [file readlink $linkpath]
		set trimpath [regsub -all {\.\./} $rawpath {}]
 		if [file isdirectory /sys/$trimpath] {
			append loginit "\n Using path $path\n"
			set path /$trimpath
		}
	}
}

if {![regexp {ttyUSB[0-9]+} $path myPort]} {
	if $flags(logging) {
		set device [clock clicks]
		Log "$loginit\nThis is not a ttyUSB port. Aborting"
	}
	return ""
}

set device $myPort
Log "$loginit\nMy name is $myPort\n"

if {![regexp {(.*?[0-9]+)\.([0-9]+)/ttyUSB} /sys$path d ifRoot ifNum]} {
	Log "Could not find interface in path\n $path. Aborting"
	return ""
}

set ifDir $ifRoot.$ifNum

Log "Checking my endpoints ...\n in $ifDir"
if [hasInterrupt $ifDir] {
	Log "\n--> I am an interrupt port"
	set rightPort 1
} else {
	Log "\n--> I am not an interrupt port\n"
	set rightPort 0
}

# There are devices with more than one interrupt interface.
# Assume that the lowest of these is usable. Check all
# possible lower interfaces

if { $rightPort && ($ifNum > 0) } {
	Log "\nLooking for lower ports with interrupt endpoints"
	for {set i 0} {$i < $ifNum} {incr i} {
		set ifDir $ifRoot.$i
		Log " in ifDir $ifDir ..."
		if [hasInterrupt $ifDir] {
			Log "\n--> found an interrupt interface below me\n"
			set rightPort 0
			break
		}
	}
}
if {$rightPort == 0} {
	Log "Return empty name and exit"
	return ""
}

Log "\n--> No interrupt interface below me\n"

cd /dev
set idx 2
set symlinkName "gsmmodem"
while {$idx < 256} {
	if {![file exists $symlinkName]} {
		set placeholder [open /dev/$symlinkName w]
		close $placeholder
		break
	}
	set symlinkName gsmmodem$idx
	incr idx
}
if {$idx == 256} {return ""}

Log "Return symlink name \"$symlinkName\" and exit"
return $symlinkName

}
# end of proc {SymLinkName}


# Load and bind driver (default "option")
#
proc {CheckDriverBind} {vid pid} {
global config

foreach fn {/sbin/modprobe /usr/sbin/modprobe} {
	if [file exists $fn] {
		set loader $fn
	}
}
Log "Module loader is $loader"

set idfile $config(driverIDPath)/new_id
if {![file exists $idfile]} {
	if {$loader == ""} {
		Log "Can't do anymore without module loader; get \"modtools\"!"
		return
	}
	Log "\nTrying to load module \"$config(driverModule)\""
	if [catch {set result [exec $loader -v $config(driverModule)]} err] {
		Log " Running \"$loader $config(driverModule)\" gave an error:\n  $err"
	} else {
		Log " Module was loaded successfully:\n$result"
	}
} else {
	Log "Module is active already"
}
set i 0
while {$i < 50} {
	if [file exists $idfile] {
		break
	}
	after 20
	incr i
}
if {$i < 50} {
	Log "Trying to add ID to driver \"$config(driverModule)\""
	SysLog "usb_modeswitch: adding device ID $vid:$pid to driver \"$config(driverModule)\""
	SysLog "usb_modeswitch: please report the device ID to the Linux USB developers!"
	if [catch {exec echo "$vid $pid ff" >$idfile} err] {
		Log " Error adding ID to driver:\n  $err"
	} else {
		Log " ID added to driver; check for new devices in /dev"
	}
} else {
	Log " \"$idfile\" not found, check if kernel version is at least 2.6.27"
	Log "Falling back to \"usbserial\""
	set config(driverModule) usbserial
	Log "\nTrying to unload driver \"usbserial\""
	if [catch {exec $loader -r usbserial} err] {
		Log " Running \"$loader -r usbserial\" gave an error:\n  $err"
		Log "No more fallbacks"
		return
	}
	after 50
	Log "\nTrying to load driver \"usbserial\" with device IDs"
	if [catch {set result [exec $loader -v usbserial vendor=0x$vid product=0x$pid]} err] {
		Log " Running \"$loader usbserial\" gave an error:\n  $err"
	} else {
		Log " Driver was loaded successfully:\n$result"
	}
}

}
# end of proc {CheckDriverBind}


# Check if USB ID is listed as needing driver binding
proc {InBindList} {id} {

set listfile /var/lib/usb_modeswitch/bind_list
if {![file exists $listfile]} {return 0}
set rc [open $listfile r]
set buffer [read $rc]
close $rc
if [string match *$id* $buffer] {
Log "Found $id in bind_list"
	return 1
} else {
Log "No $id in bind_list"
	return 0
}

}
# end of proc {InBindList}

# Add USB ID to list of devices needing later treatment
proc {AddToList} {name id} {

set listfile /var/lib/usb_modeswitch/$name
set oldlistfile /etc/usb_modeswitch.d/bind_list

if {($name == "bind_list") && [file exists $oldlistfile] && ![file exists $listfile]} {
	if [catch {file rename $oldlistfile $listfile} err] {
		Log "Error renaming the old bind list file ($err)"
		return
	}
}

if [file exists $listfile] {
	set rc [open $listfile r]
	set buffer [read $rc]
	close $rc
	if [string match *$id* $buffer] {
		return
	}
	set idList [split [string trim $buffer] \n]
}
lappend idList $id
set buffer [join $idList "\n"]
if [catch {set lc [open $listfile w]}] {return}
puts $lc $buffer
close $lc

}
# end of proc {AddToList}


# Remove USB ID from bind list (NoDriverLoading is set)
proc {RemoveFromBindList} {id} {

set listfile /var/lib/usb_modeswitch/bind_list
if [file exists $listfile] {
	set rc [open $listfile r]
	set buffer [read $rc]
	close $rc
	set idList [split [string trim $buffer] \n]
} else {
	return
}
set idx [lsearch $idList $id]
if {$idx > -1} {
	set idList [lreplace $idList $idx $idx]
} else {
	return
}
if {[llength $idList] == 0} {
	file delete $listfile
	return
}
set buffer [join $idList "\n"]
if [catch {set lc [open $listfile w]}] {return}
puts $lc $buffer
close $lc

}
# end of proc {RemoveFromBindList}

proc {CheckSuccess} {devdir} {

global config usb
set ifdir "[file tail $devdir]:1.0"

if {[string length $config(targetClass)] || [string length $config(Configuration)]} {
	set config(targetVendor) $usb(idVendor)
	set config(targetProduct) $usb(idProduct)
}
Log "Checking success of mode switch for max. $config(checkSuccess) seconds ..."

for {set i 1} {$i <= $config(checkSuccess)} {incr i} {
	after 1000
	if {![file isdirectory $devdir]} {
		Log " Waiting for device file system ($i sec.) ..."
		continue
	} else {
		Log " Reading attributes ..."
	}
	if {![ReadUSBAttrs $devdir $ifdir]} {
		Log " Essential attributes are missing, continue wait ..."
		continue
	}
	if [string length $config(targetClass)] {
		if {![regexp $usb($ifdir/bInterfaceClass) $config(targetClass)]} {continue}
	}
	if [string length $config(Configuration)] {
		if {$usb(bConfigurationValue) != $config(Configuration} {continue}
	}
	if {![regexp $usb(idVendor) $config(targetVendor)]} {continue}
	if {![regexp $usb(idProduct) $config(targetProduct)]} {continue}
	Log " All attributes matched"
	break
}
if {$i > 20} {
	return 0
}
return 1

}
# end of proc {CheckSuccess}

proc {SysLog} {msg} {

global flags
if {![info exists flags(logger)]} {
	set flags(logger) ""
	foreach fn {/bin/logger /usr/bin/logger} {
		if [file exists $fn] {
			set flags(logger) $fn
		}
	}
	Log "Logger is $flags(logger)"
}
if {$flags(logger) == ""} {
	Log "Can't add system message, no syslog helper found"
	return
}
catch {exec $flags(logger) -p syslog.notice "$msg" 2>/dev/null}

}
# end of proc {SysLog}



# The actual entry point
Main $argv $argc