---------------------------------------------------------------
Thu Apr 17 17:09:54 CEST 2008 - werner@suse.de

- Scan always mpeg audio header in mad_frame_decode() as we
  work around the buffer guard internal of mad_header_decode()
- Do not delay first resulting PCM frame of mad_frame_decode()

---------------------------------------------------------------
Mon Apr  7 15:36:26 CEST 2008 - werner@suse.de

- Support only VDR 1.6.0 and higher

---------------------------------------------------------------
Tue Mar 14 16:59:38 CET 2006 - werner@suse.de

- Various cleanups and bug fixes
- Try to get Mpeg Audio more lip sync

---------------------------------------------------------------
Wed Jun 22  9:12:24 CEST 2005 - werner@suse.de

- Add recording check to avoid to run into Add/DelPid trouble
- Use switching thread even for VDR 1.3.21+

---------------------------------------------------------------
Tue Jun  7 12:23:33 CEST 2005 - werner@suse.de

- The ORF sample provided by a user has a large delay gap
  therefore do not timeout after 3 seconds.

---------------------------------------------------------------
Mon Apr 11 12:24:55 CEST 2005 - werner@suse.de

- Muting: Don't remove PAUSE flag at clearing spdif device

---------------------------------------------------------------
Thu Mar 24 19:24:23 CET 2005 - werner@suse.de

- Add bug fix from Marcel Wiesweg in byte handle class
- Add thread locking class based on cThreadLock to get a non
  interrupted S/P-DIF forwarding in case of starting and
  handling low state of the HW buffer of the sound card.

---------------------------------------------------------------
Thu Mar 24  8:24:33 CET 2005 - werner@suse.de

- Drop workaround on VDR Add/DelPid bug for ptOther and the
  handling on `Device or resource busy' because it breaks
  replay part of the plugin.
- Start the live forwarding thread by attaching the receiver,
  requires a new logic to wait on the data stream and its type.
- Make MP2 Audio more synchron
- Be sure to store the correct name for PCMinitial
- Do not flood the syslog with mp2 messages if burst size is
  less than for layer II/III.

---------------------------------------------------------------
Wed Mar 16 19:40:10 CET 2005 - werner@suse.de

- Speed up Sample generation from mp2
- Small correction of burst size for layer III

---------------------------------------------------------------
Tue Mar 15  8:05:27 CET 2005 - werner@suse.de

- Add nonlinear mp2 loop through S/P-DIF similar to AC3/DTS
- Use a frame based mp2 parser for libmad with buffer gard
- Make PCM initial wait frames configurable
- Remove Z680 option
- Remove MP2offset
- Add a workaround for broken sub audio header in PS1 payloads
- Be smarter in AV synchronization, wait on stable STC value
- Make xlist find plain AC3 in PS1 payload even from ORF

---------------------------------------------------------------
Fri Feb 18  8:37:56 CET 2005 - werner@suse.de

- Changes for VDR 1.3.21+

---------------------------------------------------------------
Tue Oct 26 16:43:59 CEST 2004 - werner@suse.de

- Various cleanups and fixes for synchronization and NPTL

---------------------------------------------------------------
Sun Jul  4 19:33:17 CEST 2004 - werner@suse.de

- More on compiler troubles
- Some minor changes
- Add hints about tmpfs

---------------------------------------------------------------
Thu Jun  3  9:29:32 CEST 2004 - werner@suse.de

- Make compile on Hammer

---------------------------------------------------------------
Wed Jun  2  9:32:14 CEST 2004 - werner@suse.de

- Change order within canceling threads
- Use condition variable to sleep in switching thread

---------------------------------------------------------------
Sun May 30 21:05:05 CEST 2004 - werner@suse.de

- Better AV sync after muting
- Fix old bug in handling DVD streams and muting them

---------------------------------------------------------------
Fri May 29 16:16:48 CEST 2004 - werner@suse.de

- Rewrite the scanning engines to be able to reset all
  current values if we change Live channel or mute audio.
- This solve also the broken start frames

---------------------------------------------------------------
Thu May 27 09:55:23 CEST 2004 - werner@suse.de

- Change forwarding engine to send the PCM_WAIT frames in
  correct order which depends on audio and none audio PCM.
- Be sure only to use a unique PTS value even if frames
  may fail. Therefore start forwarding engine only if we
  cross a PES boundary and have a PTS value.
- Add frame counting for LiveTV to be able to start the
  forwarding engine as fast as possible.

---------------------------------------------------------------
Thu May 20 08:32:11 CEST 2004 - werner@suse.de

- Change soundblaster mute script to be be configurable
  for more than on soundblaster type.
- Add README for soundblaster mute script

---------------------------------------------------------------
Tue May  4 09:34:14 CEST 2004 - werner@suse.de

- Reenable the deactivation of the plugin
- Remove thread locking within forwarding thread which
  may cause locks.

---------------------------------------------------------------
Fri Apr 30 21:10:48 CEST 2004 - werner@suse.de

- Simply continue to get next pcm frame if PTS != STC
- Compare system clock delay with STC delay and only if
  both clocks are in sync we assume that STC is stable
- Switch back to frame repeat instead of sample repeat
  even for real audio. 

---------------------------------------------------------------
Wed Apr 28 09:06:46 CEST 2004 - werner@suse.de

- Try to solve delay detection to get the min start delay
- Don't repeat frames but stereo samples in case of audio

---------------------------------------------------------------
Wed Apr  7 19:28:30 CEST 2004 - werner@suse.de

- Fix boolean cut&paste error in shm_malloc()
- Lock threads in Live Receiver and also in
  S/P-DIF forwarding thread.

---------------------------------------------------------------
Fri Mar 26 20:25:28 CET 2004 - werner@suse.de

- Use always cDevice::CurrentChannel() in ChannelSwitch() to
  be sure to get always the live channel on the primary card.

---------------------------------------------------------------
Tue Mar 23 08:07:53 CET 2004 - werner@suse.de

- Be sure that we do not get a SIGSEGV if terminated
- Add a further delay value for LiveTV
- Try out some DTS sanity checks
- Add some kernel version magic to shm_memory_tool

---------------------------------------------------------------
Fri Jan  9 18:50:31 CET 2004 - werner@suse.de

- Make some compiler happy

---------------------------------------------------------------
Thu Jan  8 23:35:09 CET 2004 - werner@suse.de

- Fix bug in MP2Decoder::pushData(): use stream not m_stream
  for sync start check.
- Enhance MP2Decoder::pushData(): return the used data length
  to be able to increase the data pointer address. This helps
  to avoid to skip buffer of the overrun at start time.
- Fix bug in mp2.c: Be sure that buffer is only refilled if
  really emptied.
- Fix bug in channel.c: do not clear boundary flag at the end
  because data frames in payload may overlap (MP2 audio)
- Enhance STC/PTS check by using a timer of 2 seconds
- spdif.c: Audio/Video delay can differ upto two GOPs which is
  upto one second for PAL.
- Fix the changes for ALSA lib 1.0
- Try to make it work with VDR 1.3.0

---------------------------------------------------------------
Sat Dec 20 17:39:18 CET 2003 - werner@suse.de

- Change cHandle macros to avoid confict with autopid includes
- Make setup bits available to spdif class
- Enhance synchronization
  * Handle Mute and Pause different
  * Set delay to zero
  * After sleeping on input check if spdif should be closed
  * Workaround for 33bit bug of av711x DVB card for STC values
  * Avoid deadlock due buffer overrun
- Fix audio pid change
  * Use mutex for better protection
  * Do not switch back if an other audio type is choosen
  * Make language change possible in bitstreamout menu
- Fix SHM usage: initialize it only once, free up on exit

---------------------------------------------------------------
Mon Dec  1 11:54:47 CET 2003 - werner@suse.de

- Use a break point for check for valid STC values, do not
  reject for ever but only for the first 320 ms invalid STCs
- Always reset current position in TS scan if STC fails

---------------------------------------------------------------
Fri Nov 28 11:15:20 CET 2003 - werner@suse.de

- Do NEVER attach any receiver if replay stops, this will done
  by ChannelSwitch.
- Be sure that STC values of DVB card are valid
- Start audio out only if an uptodate PTS value is found
- Be sure that mute stays even if we do FF or FB during replay
- Simplify the AttachReceiver routine, no recursion needed

---------------------------------------------------------------
Tue Nov 24 21:34:35 CET 2003 - werner@suse.de

- Get docs uptodate.
- Use compile time switches for newer ALSA versions.
- Add some workarounds against initial hw soundbuffer underrun.
- Add protection against mad driving realtime thread.
- Fix remaining bugs

---------------------------------------------------------------
Tue Nov 18 15:31:30 CET 2003 - werner@suse.de

- First try to integrate Svens MP2 part.

---------------------------------------------------------------
Tue Nov 11 10:00:00 CEST 2003 - sven AT jausoft dot com

- shm_malloc as non_root (Olaf Titz)
- Make.arch cleanup (Werner) 
- added shm usage hint in INSTALL
- added werners patches (2003-11-11)
- needs vdr >= 1.2.6pre6 - no more extra STC patch !

---------------------------------------------------------------
Tue Nov 02 10:00:00 CEST 2003 - sven AT jausoft dot com

- finished analysing the a/v sync problema:
	- we have no chance in live mode to sync,
	  'cause our receiver _might_ receive audio packets
	  too late - all the time (about 5-70ms).
	  	- there is no kinda "prefetch" thing ..
	- only in playback/transfer mode, we are in sync !
	- so we skip all actions to stay in sync
		
- patch dvbplayer.c,transfer.h and transfer.c with:
	vdr-1.2.6-mp2PlayAudio-v4.diff
  - this one is a bug fixed one
  - now you can select 2 + 1 audio streams (2 audio + 1 dolby)
  - dolby is now again the very first default audio, if available !
  - transfer mode uses the same logic as dvbplayer now !

---------------------------------------------------------------
Tue Oct 30 12:25:00 CEST 2003 - sven AT jausoft dot com

- modified cDevice::getSTC
	- added argument ePidType
	- added protected method cDevice::GetPidHandle
	- just apply the patch
	     vdr-1.2.6-device-getSTC-v2.diff
- temp. removed "sleeping" or "skip" action
- live-view (channels.c): moved mp2->pcm decoding to play site..
- learned, that a "delay" of < -300 is really in sync, see replay!
- achive about -5 .. -30 delay .. nearly in sync
- removed obsolete mp2.h, mp2.c
- to see PTS delays just edit pts.h and activate debug_pts

---------------------------------------------------------------
Tue Oct 27 02:06:00 CEST 2003 - sven AT jausoft dot com

- introducing getSTC in device:
	vdr-1.2.6-device-getSTC.diff
  to achieve the stream time counter (stc) timestamp,
  to support a/v sync
- pts is now using stc .. currently only in channels.
- switch delay to _zero_, to make pts able to sync ..

---------------------------------------------------------------
Tue Oct 27 02:06:00 CEST 2003 - sven AT jausoft dot com

- pts process action is off (commented out), 'cause we have to
  wait for a solution, where the dvb driver will tell us,
  the correct just played timestamp ..
- introducing MP2 switch enable/disable
	- meaningfull if you have a S/P Dif loop through

---------------------------------------------------------------
Tue Oct 22 02:06:00 CEST 2003 - sven AT jausoft dot com

- update dvd plugin to vdr-dvd-0.3.4-rc6
- take better care of case than more then one audio streams
  appears .. the 1st one wins ..
- recording playback (dvbplayer), to use MP2/AC3 properly,
  patch dvbplayer.c with:
	dvbplayer.1.2.6pre2-mp2PlayAudiov2.diff
  - this one is a bug fixed one
  - now you can select 2 + 1 audio streams (2 audio + 1 dolby)
- added cPlayer audio track selection within main menu as well
- moved PTS processing into pts.h, where it belongs
- added abstraction of decoder -> AnyDecoder
- replay uses cPTS::process as well ..

---------------------------------------------------------------
Tue Oct 20 20:06:00 CEST 2003 - sven AT jausoft dot com

- added audio pid selection in main menu
	- if used and selected != vdr_selection,
	  further vdr_selections (apid) is blocked
- shm_malloc
	- new malloc offering flags argument
- using shm_malloc with SHM_SHARED flag -> mmap works.
- removed a deadlock spdif::Clear(exit==true) if mmap is used
- bugfixed PTS usage
	- respecting the ptsflag 
	- trying a new pts_diff, time_diff calc .. (??)
- mp2 hardsync fixed

---------------------------------------------------------------
Tue Oct 20 05:06:00 CEST 2003 - sven AT jausoft dot com

- Added mp2 -> pcm decoding
	- Using libmad 
		- mp2_decoder.[ch]
	- LiveView (channels.c) with an "observer" thread 
	  to know if AudioSwitch has happen.
	- player's, dvd, ..., first audio stream's tracknumber win's
	- recordings (dvbplayer), to use MP2 patch dvbplayer.c:
		dvbplayer.1.2.6pre-mp2PlayAudio.diff
	- using PTS information (using pts.h now), 
	  currently only audio_pts < now (audio is too late)
	  looks like to work .. -> skip mp2 packages 
	  earlier PTS infos are ignored ..

- cPTS::done() fix 
	- adding "gettimeofday(&ts, 0);" at the end ..

- added a whole lot of debug statements to debug ;-)
  and as a little documentation ..

- changed threading lockings
	- cInStream will be detached by super destructor
	- added more test_flag checks
	- all while(test_flag(RUNNING)) deactivators,
          check if the thread is really running at last 
	- ...

- Added little MainMenu ..
	- on/off
	- Mp2Dither ..
	- delay
	- audio track info in title, of channel

---------------------------------------------------------------
Tue Oct 14 17:03:23 CEST 2003 - werner@suse.de

- Better overrun handling in S/P-DIF interface
- Fix soft float handling

---------------------------------------------------------------
Tue Oct 14 13:06:00 CEST 2003 - werner@suse.de

- Fix new skip feature for overflow handling
- Remove initial RUNNING check for stopping Action threads
- Use unsigned long for flags to help new compilers

---------------------------------------------------------------
Mon Oct 13 17:30:50 CEST 2003 - werner@suse.de

- Reorder some scripts, code and create a new tool xlist
  and audio.sh for debugging various mpeg2 streams.
- Use skip indicator instead of usleep to ensure that
  Receive and Play return as fast as possible to main VDR.

---------------------------------------------------------------
Tue Okt 12 04:39:01 CEST 2003 - sven goethel AT jausoft dot com

the following changes enables me to use this nice plugin 
stable and flawless with the dvd plugin and under heavy load:

- Introduced locked shared memory for the ringbuffer.
  The advantage should be to force the memory within RAM,
  and to increase the buffer to: KILOBYTE(16*64)
  Since then .. i can listen to LiveTV + 3 transfer mode:
       - 2 x recording
       - 1 transfer to view
- Added ACTIVEDEBUG macro to enable DEBUG_ACTIVE, 
  for debugging purposes
- Activate(false) will continue, if (!test_flag(RUNNING)),
  the former goto out; result in a deadlock (dvd ..)
  on heavy buffer overflow ..
- cBounce::store(...) returns boolean, true if successfull,
  false if buffer overflow.
  if store fails, the usage within cReplayOutAC3::Play 
  and cInStream::Receive does a 5ms sleep 
  to protect against overloading ..

---------------------------------------------------------------
Tue Sep 23 15:26:01 CEST 2003 - werner@suse.de

- Fix transfer mode detection from primary to primary device,
  should stop staccato in case of recording on primary device.
- Remove LOCK_THREAD from Activate() class members.
- Use bits and bitmasks even for setup to have a better usage
  of the CPU's cache line.

---------------------------------------------------------------
Tue Sep 16 19:12:11 CEST 2003 - werner@suse.de

- Reset threshold of ringbuffer before data transfer, should
  fix the start delay of audio and therefore A/V sync
- Use bits and bitmasks instead of various booleans to get
  the remaining integer into the CPU's cache line.
- Speed up the TS scanner by unrolling some loops.

---------------------------------------------------------------
Tue Aug  5 15:31:30 CEST 2003 - werner@suse.de

- Better scanning of audio substream headers

---------------------------------------------------------------
Fri Jun 13 15:44:01 CEST 2003 - werner@suse.de

- Add vdr-1.2.1-audio.dif
- Try to increase rtc clock for ALSA
- Use cDevice::ActualDevice() for tranfer check

---------------------------------------------------------------
Mon May 19 08:09:07 CEST 2003 - werner@suse.de

- Add vdr-1.1.32-audio.dif

---------------------------------------------------------------
Wed Apr 23 11:56:50 CEST 2003 - werner@suse.de

- Drop Thread Local Storage usage for now
- Add audio patch for VDR 1.1.28

---------------------------------------------------------------
Tue Apr 15 07:55:10 CEST 2003 - werner@suse.de

- Add some more comments to PROBLEMS
- Use dynamic generation of used period size to get a integer
  divisor of the burst size
- Add patch for VDR 1.1.27
- Add patches for DVB driver 2003-04-08 and dvb-2003-04-14
- Simplify muting in Pause followed by Stop/Blue 
- Be compatible with g++ 3.2/3.3 on inlined functions
- Make make working even if called via make plugins

---------------------------------------------------------------
Thu Mar 27 22:33:11 CET 2003 - werner@suse.de

- New option `-o' or `--onoff' for enabling main menu entry
  and update of the manual page.
- Use common memory for all buffers for better alignment and
  less memory consumption

---------------------------------------------------------------
Tue Mar 25 09:28:13 CET 2003 - werner@suse.de

- Add main menu entry for On/Off of bitstreamout plugin

---------------------------------------------------------------
Fri Mar 21 08:13:44 CET 2003 - werner@suse.de

- Repeat last AC3 frame if CRC error occurs.
- Replay/Pause: unmute on close if primary device is not mute

---------------------------------------------------------------
Thu Mar 20 09:47:14 CET 2003 - werner@suse.de

- Underruns within twice of the frame length should be
  catch now by the plugin.  This does not help for
  longer and repeated underruns caused by high system load.

---------------------------------------------------------------
Wed Mar 12 21:37:37 CET 2003 - werner@suse.de

- Fix long standing bug in spdif writei mapping and remove
  remark in PROBLEMS about switching IO/mmap transfer

---------------------------------------------------------------
Wed Mar 11 09:55:11 CET 2003 - werner@suse.de

- Rework Mute feature
- Fix bug in TS scanner (reset variables on boundary check)
- Implement an overrun protection (sorry only by frame drop)
- Update alsa-lib.dif
- Add vdr-1.1.25-audio.dif
- Add a remark in PROBLEMS about other plugins which causes
  audio sync loose and/or drop outs
- Add a remark in PROBLEMS about trouble with switching
  between IO and mmap based audio transfer

---------------------------------------------------------------
Wed Feb 19 21:44:22 CET 2003 - werner@suse.de

- Remove locking of control bits in spdif class because
  all is running in one thread to reduce load.
- Use temporary copy of options which cause the user to press
  the OK button
- Allow to reset a failed state after new options
- Avoid locking for check of available date in ring buffer
  to reduce load

---------------------------------------------------------------
Tue Feb 18 19:10:55 CET 2003 - werner@suse.de

- Fix for newer compilers

---------------------------------------------------------------
Tue Feb 18 09:55:07 CET 2003 - werner@suse.de

- Move from spdif.con to the setup interface of VDR
- Rewrite manual page to describe options and settings
- Enhance linear PCM detection
- Fix bug in underrun detection
- Start wrapper only at frame boundaries which should remove
  any staccato effect
- Check bounce buffer before sleeping on next frame which
  should avoid video distortion after mute due high CPU load
- Add warning about none audio linear PCM

---------------------------------------------------------------
Tue Feb 11 09:19:27 CET 2003 - werner@suse.de

- Speed up swab()
- Fix scanning of private stream, the data stream in the pay
  load may or may not be aligned at the very beginning
- Allow also DTS and linear PCM by setting the stream type
  dynamically at first start
- Patch for AC3overDVB patch to get plugin work in replay mode

---------------------------------------------------------------
Thu Jan 30 19:01:09 CET 2003 - werner@suse.de

- Workaround for transfer mode
- Cleanup
- New VDR patches

---------------------------------------------------------------
Wed Jan 29 12:29:19 CET 2003 - werner@suse.de

- gcc does not like the dprintf macro, the libc has its own
- Use -funroll-loop and -D_GNU_SOURCE
- Standard include shouldn't be used again.
- Add INSTALL
- Add some more informations about DVB card at doc/

---------------------------------------------------------------
Tue Jan 28 12:38:12 CET 2003 - werner@suse.de

- VDR 1.1.22 requires a patch, add it.

---------------------------------------------------------------
Tue Jan 28 00:00:23 CET 2003 - werner@suse.de

- Make Live and Replay/Recording work together

---------------------------------------------------------------