;; @file
; IPRT - Global YASM/NASM macros
;

;
; Copyright (C) 2006-2012 Oracle Corporation
;
; This file is part of VirtualBox Open Source Edition (OSE), as
; available from http://www.virtualbox.org. This file is free software;
; you can redistribute it and/or modify it under the terms of the GNU
; General Public License (GPL) as published by the Free Software
; Foundation, in version 2 as it comes in the "COPYING" file of the
; VirtualBox OSE distribution. VirtualBox OSE is distributed in the
; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
;
; The contents of this file may alternatively be used under the terms
; of the Common Development and Distribution License Version 1.0
; (CDDL) only, as it comes in the "COPYING.CDDL" file of the
; VirtualBox OSE distribution, in which case the provisions of the
; CDDL are applicable instead of those of the GPL.
;
; You may elect to license modified versions of this file under the
; terms and conditions of either the GPL or the CDDL or both.
;

%ifndef ___iprt_asmdefs_mac
%define ___iprt_asmdefs_mac


;; @defgroup grp_rt_cdefs_size     Size Constants
; (Of course, these are binary computer terms, not SI.)
; @{
;; 1 K (Kilo)                     (1 024).
%define _1K                     000000400h
;; 4 K (Kilo)                     (4 096).
%define _4K                     000001000h
;; 32 K (Kilo)                   (32 678).
%define _32K                    000008000h
;; 64 K (Kilo)                   (65 536).
%define _64K                    000010000h
;; 128 K (Kilo)                 (131 072).
%define _128K                   000020000h
;; 256 K (Kilo)                 (262 144).
%define _256K                   000040000h
;; 512 K (Kilo)                 (524 288).
%define _512K                   000080000h
;; 1 M (Mega)                 (1 048 576).
%define _1M                     000100000h
;; 2 M (Mega)                 (2 097 152).
%define _2M                     000200000h
;; 4 M (Mega)                 (4 194 304).
%define _4M                     000400000h
;; 1 G (Giga)             (1 073 741 824).
%define _1G                     040000000h
;; 2 G (Giga)             (2 147 483 648).
%define _2G             00000000080000000h
;; 4 G (Giga)             (4 294 967 296).
%define _4G             00000000100000000h
;; 1 T (Tera)         (1 099 511 627 776).
%define _1T             00000010000000000h
;; 1 P (Peta)     (1 125 899 906 842 624).
%define _1P             00004000000000000h
;; 1 E (Exa)  (1 152 921 504 606 846 976).
%define _1E             01000000000000000h
;; 2 E (Exa)  (2 305 843 009 213 693 952).
%define _2E             02000000000000000h
;; @}


;;
; Make the mask for the given bit.
%define RT_BIT(bit)        (1 << bit)

;;
; Makes a 32-bit unsigned (not type safe, but whatever) out of four byte values.
%define RT_MAKE_U32_FROM_U8(b0, b1, b2, b3) ( (b3 << 24) | (b2 << 16) | (b1 << 8) | b0 )

;; Define ASM_FORMAT_PE64 if applicable.
%ifdef ASM_FORMAT_PE
 %ifdef RT_ARCH_AMD64
  %define ASM_FORMAT_PE64       1
 %endif
%endif

;;
; SEH64 macros.
%ifdef RT_ASM_WITH_SEH64
 %ifndef ASM_FORMAT_PE64
  %undef RT_ASM_WITH_SEH64
 %endif
%endif

;;
; Records a xBP push.
%macro SEH64_PUSH_xBP 0
 %ifdef RT_ASM_WITH_SEH64
  [pushreg rbp]
 %endif
%endmacro

;;
; Sets xBP as frame pointer that's pointing to a stack position %1 relative to xSP.
%macro SEH64_SET_FRAME_xBP 1
 %ifdef RT_ASM_WITH_SEH64
  [setframe rbp, %1]
 %endif
%endmacro

;;
; Ends the prologue.
%macro SEH64_END_PROLOGUE 0
 %ifdef RT_ASM_WITH_SEH64
 [endprolog]
 %endif
%endmacro


;;
; Align code, pad with INT3.
%define ALIGNCODE(alignment) align alignment, db 0cch

;;
; Align data, pad with ZEROs.
%define ALIGNDATA(alignment) align alignment, db 0

;;
; Align BSS, pad with ZEROs.
%define ALIGNBSS(alignment) align alignment, resb 1

;;
; NAME_OVERLOAD can be defined by a .asm module to modify all the
; names created using the name macros in this files.
; This is handy when you've got some kind of template code.
%ifndef NAME_OVERLOAD
 %define NAME_OVERLOAD(name) name
%endif

;;
; Mangles the given name so it can be referenced using DECLASM() in the
; C/C++ world.
%ifndef ASM_FORMAT_BIN
 %ifdef RT_ARCH_X86
  %ifdef RT_OS_OS2
   %define NAME(name)   _ %+ NAME_OVERLOAD(name)
  %endif
  %ifdef RT_OS_WINDOWS
   %define NAME(name)   _ %+ NAME_OVERLOAD(name)
  %endif
 %endif
 %ifdef RT_OS_DARWIN
  %define NAME(name)    _ %+ NAME_OVERLOAD(name)
 %endif
%endif
%ifndef NAME
 %define NAME(name)     NAME_OVERLOAD(name)
%endif

;;
; Mangles the given C name so it will _import_ the right symbol.
%ifdef ASM_FORMAT_PE
 %define IMPNAME(name)  __imp_ %+ NAME(name)
%else
 %define IMPNAME(name)  NAME(name)
%endif

;;
; Gets the pointer to an imported object.
%ifdef ASM_FORMAT_PE
 %ifdef RT_ARCH_AMD64
  %define IMP(name)     qword [IMPNAME(name) wrt rip]
 %else
  %define IMP(name)     dword [IMPNAME(name)]
 %endif
%else
 %define IMP(name)      IMPNAME(name)
%endif

;;
; Declares an imported object for use with IMP2.
; @note May change the current section!
%macro EXTERN_IMP2 1
    extern IMPNAME(%1)
    BEGINDATA
 %ifdef ASM_FORMAT_MACHO
    g_Imp2_ %+ %1:  RTCCPTR_DEF IMPNAME(%1)
 %endif
%endmacro

;;
; Gets the pointer to an imported object, version 2.
%ifdef ASM_FORMAT_PE
 %ifdef RT_ARCH_AMD64
  %define IMP2(name)    qword [IMPNAME(name) wrt rip]
 %else
  %define IMP2(name)    dword [IMPNAME(name)]
 %endif
%elifdef ASM_FORMAT_ELF
 %ifdef PIC
  %ifdef RT_ARCH_AMD64
   %define IMP2(name)   qword [rel IMPNAME(name) wrt ..got]
  %else
   %define IMP2(name)   IMPNAME(name) wrt ..plt
  %endif
 %endif
%elifdef ASM_FORMAT_MACHO
 %define IMP2(name)     RTCCPTR_PRE [g_Imp2_ %+ name xWrtRIP]
%endif
%ifndef IMP2
 %define IMP2(name)     IMPNAME(name)
%endif



;;
; Global marker which is DECLASM() compatible.
%macro GLOBALNAME 1,
%ifndef ASM_FORMAT_BIN
global NAME(%1)
%endif
NAME(%1):
%endmacro

;;
; Global exported marker which is DECLASM() compatible.
%macro EXPORTEDNAME 1,
 %ifdef ASM_FORMAT_PE
  export %1=NAME(%1)
 %endif
 %ifdef __NASM__
  %ifdef ASM_FORMAT_OMF
   export NAME(%1) NAME(%1)
  %endif
%endif
GLOBALNAME %1
%endmacro

;;
; Global marker which is DECLASM() compatible.
%macro GLOBALNAME_EX 2,
%ifndef ASM_FORMAT_BIN
 %ifdef ASM_FORMAT_ELF
global NAME(%1):%2
 %else
global NAME(%1)
 %endif
%endif
NAME(%1):
%endmacro

;;
; Global exported marker which is DECLASM() compatible.
%macro EXPORTEDNAME_EX 2,
 %ifdef ASM_FORMAT_PE
  export %1=NAME(%1)
 %endif
 %ifdef __NASM__
  %ifdef ASM_FORMAT_OMF
   export NAME(%1) NAME(%1)
  %endif
%endif
GLOBALNAME_EX %1, %2
%endmacro

;;
; Begins a C callable procedure.
%macro BEGINPROC 1
 %ifdef RT_ASM_WITH_SEH64
global     NAME(%1):function
proc_frame NAME(%1)
 %else
GLOBALNAME_EX %1, function hidden
 %endif
%endmacro

;;
; Begins a C callable exported procedure.
%macro BEGINPROC_EXPORTED 1
 %ifdef RT_ASM_WITH_SEH64
  %ifdef ASM_FORMAT_PE
export  %1=NAME(%1)
  %endif
global     NAME(%1):function
proc_frame NAME(%1)
 %else
EXPORTEDNAME_EX %1, function
 %endif
%endmacro

;;
; Ends a C callable procedure.
%macro ENDPROC 1
 %ifdef RT_ASM_WITH_SEH64
endproc_frame
 %endif
GLOBALNAME_EX %1 %+ _EndProc, function hidden
%ifdef ASM_FORMAT_ELF
size NAME(%1)               NAME(%1 %+ _EndProc) - NAME(%1)
size NAME(%1 %+ _EndProc)   0
%endif
    db  0xCC, 0xCC, 0xCC, 0xCC
%endmacro


;
; Do OMF and Mach-O/Yasm segment definitions
;
; Both format requires this to get the segment order right, in the Mach-O/Yasm case
; it's only to make sure the .bss section ends up last (it's not declared here).
;
%ifdef ASM_FORMAT_OMF

 ; 16-bit segments first (OMF / OS/2 specific).
 %ifdef RT_INCL_16BIT_SEGMENTS
  segment DATA16 public CLASS=FAR_DATA align=16 use16
  segment DATA16_INIT public CLASS=FAR_DATA align=16 use16
  group DGROUP16 DATA16 DATA16_INIT

  ;;
  ; Begins 16-bit data
  %macro BEGINDATA16 0
   segment DATA16
  %endmacro

  ;;
  ; Begins 16-bit init data
  %macro BEGINDATA16INIT 0
   segment DATA16_INIT
  %endmacro

  segment CODE16 public CLASS=FAR_CODE align=16 use16
  segment CODE16_INIT public CLASS=FAR_CODE align=16 use16
  group CGROUP16 CODE16 CODE16_INIT

  ;;
  ; Begins 16-bit code
  %macro BEGINCODE16 0
   segment CODE16
  %endmacro

  ;;
  ; Begins 16-bit init code
  %macro BEGINCODE16INIT 0
   segment CODE16_INIT
  %endmacro

 %endif

 ; 32-bit segments.
 segment TEXT32 public CLASS=CODE align=16 use32 flat
 segment DATA32 public CLASS=DATA align=16 use32 flat
 segment BSS32  public CLASS=BSS  align=16 use32 flat

 ; Make the TEXT32 segment default.
 segment TEXT32
%endif

%ifdef ASM_FORMAT_MACHO
 %ifdef __YASM__
  section .text
  section .data
 %endif
%endif


;;
; Begins code
%ifdef ASM_FORMAT_OMF
 %macro BEGINCODE 0
  segment TEXT32
 %endmacro
%else
%macro BEGINCODE 0
 section .text
%endmacro
%endif

;;
; Begins constant (read-only) data
;
; @remarks  This is mapped to the CODE section/segment when there isn't
;           any dedicated const section/segment. (There is code that
;           assumes this, so don't try change it.)
%ifdef ASM_FORMAT_OMF
 %macro BEGINCONST 0
  segment TEXT32
 %endmacro
%else
 %macro BEGINCONST 0
  %ifdef ASM_FORMAT_MACHO ;; @todo check the other guys too.
   section .rodata
  %else
   section .text
  %endif
 %endmacro
%endif

;;
; Begins initialized data
%ifdef ASM_FORMAT_OMF
 %macro BEGINDATA 0
  segment DATA32
 %endmacro
%else
%macro BEGINDATA 0
 section .data
%endmacro
%endif

;;
; Begins uninitialized data
%ifdef ASM_FORMAT_OMF
 %macro BEGINBSS 0
  segment BSS32
 %endmacro
%else
%macro BEGINBSS 0
 section .bss
%endmacro
%endif



;; @def ARCH_BITS
; Defines the bit count of the current context.
%ifndef ARCH_BITS
 %ifdef RT_ARCH_AMD64
  %define ARCH_BITS 64
 %else
  %define ARCH_BITS 32
 %endif
%endif

;; @def HC_ARCH_BITS
; Defines the host architechture bit count.
%ifndef HC_ARCH_BITS
 %ifndef IN_RC
  %define HC_ARCH_BITS ARCH_BITS
 %else
  %define HC_ARCH_BITS 32
 %endif
%endif

;; @def R3_ARCH_BITS
; Defines the host ring-3 architechture bit count.
%ifndef R3_ARCH_BITS
 %ifdef IN_RING3
  %define R3_ARCH_BITS ARCH_BITS
 %else
  %define R3_ARCH_BITS HC_ARCH_BITS
 %endif
%endif

;; @def R0_ARCH_BITS
; Defines the host ring-0 architechture bit count.
%ifndef R0_ARCH_BITS
 %ifdef IN_RING0
  %define R0_ARCH_BITS ARCH_BITS
 %else
  %define R0_ARCH_BITS HC_ARCH_BITS
 %endif
%endif

;; @def GC_ARCH_BITS
; Defines the guest architechture bit count.
%ifndef GC_ARCH_BITS
 %ifdef IN_RC
  %define GC_ARCH_BITS ARCH_BITS
 %else
  %define GC_ARCH_BITS 32
 %endif
%endif



;; @def RTHCPTR_DEF
; The pesudo-instruction used to declare an initialized pointer variable in the host context.
%if HC_ARCH_BITS == 64
 %define RTHCPTR_DEF    dq
%else
 %define RTHCPTR_DEF    dd
%endif

;; @def RTHCPTR_RES
; The pesudo-instruction used to declare (=reserve space for) an uninitialized pointer
; variable of the host context.
%if HC_ARCH_BITS == 64
 %define RTHCPTR_RES    resq
%else
 %define RTHCPTR_RES    resd
%endif

;; @def RTHCPTR_PRE
; The memory operand prefix used for a pointer in the host context.
%if HC_ARCH_BITS == 64
 %define RTHCPTR_PRE    qword
%else
 %define RTHCPTR_PRE    dword
%endif

;; @def RTHCPTR_CB
; The size in bytes of a pointer in the host context.
%if HC_ARCH_BITS == 64
 %define RTHCPTR_CB     8
%else
 %define RTHCPTR_CB     4
%endif



;; @def RTR0PTR_DEF
; The pesudo-instruction used to declare an initialized pointer variable in the ring-0 host context.
%if R0_ARCH_BITS == 64
 %define RTR0PTR_DEF    dq
%else
 %define RTR0PTR_DEF    dd
%endif

;; @def RTR0PTR_RES
; The pesudo-instruction used to declare (=reserve space for) an uninitialized pointer
; variable of the ring-0 host context.
%if R0_ARCH_BITS == 64
 %define RTR0PTR_RES    resq
%else
 %define RTR0PTR_RES    resd
%endif

;; @def RTR0PTR_PRE
; The memory operand prefix used for a pointer in the ring-0 host context.
%if R0_ARCH_BITS == 64
 %define RTR0PTR_PRE    qword
%else
 %define RTR0PTR_PRE    dword
%endif

;; @def RTR0PTR_CB
; The size in bytes of a pointer in the ring-0 host context.
%if R0_ARCH_BITS == 64
 %define RTR0PTR_CB     8
%else
 %define RTR0PTR_CB     4
%endif



;; @def RTR3PTR_DEF
; The pesudo-instruction used to declare an initialized pointer variable in the ring-3 host context.
%if R3_ARCH_BITS == 64
 %define RTR3PTR_DEF    dq
%else
 %define RTR3PTR_DEF    dd
%endif

;; @def RTR3PTR_RES
; The pesudo-instruction used to declare (=reserve space for) an uninitialized pointer
; variable of the ring-3 host context.
%if R3_ARCH_BITS == 64
 %define RTR3PTR_RES    resq
%else
 %define RTR3PTR_RES    resd
%endif

;; @def RTR3PTR_PRE
; The memory operand prefix used for a pointer in the ring-3 host context.
%if R3_ARCH_BITS == 64
 %define RTR3PTR_PRE    qword
%else
 %define RTR3PTR_PRE    dword
%endif

;; @def RTR3PTR_CB
; The size in bytes of a pointer in the ring-3 host context.
%if R3_ARCH_BITS == 64
 %define RTR3PTR_CB     8
%else
 %define RTR3PTR_CB     4
%endif



;; @def RTGCPTR_DEF
; The pesudo-instruction used to declare an initialized pointer variable in the guest context.
%if GC_ARCH_BITS == 64
 %define RTGCPTR_DEF    dq
%else
 %define RTGCPTR_DEF    dd
%endif

;; @def RTGCPTR_RES
; The pesudo-instruction used to declare (=reserve space for) an uninitialized pointer
; variable of the guest context.
%if GC_ARCH_BITS == 64
 %define RTGCPTR_RES    resq
%else
 %define RTGCPTR_RES    resd
%endif

%define RTGCPTR32_RES   resd
%define RTGCPTR64_RES   resq

;; @def RTGCPTR_PRE
; The memory operand prefix used for a pointer in the guest context.
%if GC_ARCH_BITS == 64
 %define RTGCPTR_PRE    qword
%else
 %define RTGCPTR_PRE    dword
%endif

;; @def RTGCPTR_CB
; The size in bytes of a pointer in the guest context.
%if GC_ARCH_BITS == 64
 %define RTGCPTR_CB     8
%else
 %define RTGCPTR_CB     4
%endif


;; @def RTRCPTR_DEF
; The pesudo-instruction used to declare an initialized pointer variable in the raw mode context.
%define RTRCPTR_DEF    dd

;; @def RTRCPTR_RES
; The pesudo-instruction used to declare (=reserve space for) an uninitialized pointer
; variable of the raw mode context.
%define RTRCPTR_RES    resd

;; @def RTRCPTR_PRE
; The memory operand prefix used for a pointer in the raw mode context.
%define RTRCPTR_PRE    dword

;; @def RTRCPTR_CB
; The size in bytes of a pointer in the raw mode context.
%define RTRCPTR_CB     4


;; @def RT_CCPTR_DEF
; The pesudo-instruction used to declare an initialized pointer variable in the current context.

;; @def RT_CCPTR_RES
; The pesudo-instruction used to declare (=reserve space for) an uninitialized pointer
; variable of the current context.

;; @def RT_CCPTR_PRE
; The memory operand prefix used for a pointer in the current context.

;; @def RT_CCPTR_CB
; The size in bytes of a pointer in the current context.

%ifdef IN_RC
 %define RTCCPTR_DEF        RTRCPTR_DEF
 %define RTCCPTR_RES        RTRCPTR_RES
 %define RTCCPTR_PRE        RTRCPTR_PRE
 %define RTCCPTR_CB         RTRCPTR_CB
%else
 %ifdef IN_RING0
  %define RTCCPTR_DEF       RTR0PTR_DEF
  %define RTCCPTR_RES       RTR0PTR_RES
  %define RTCCPTR_PRE       RTR0PTR_PRE
  %define RTCCPTR_CB        RTR0PTR_CB
 %else
  %define RTCCPTR_DEF       RTR3PTR_DEF
  %define RTCCPTR_RES       RTR3PTR_RES
  %define RTCCPTR_PRE       RTR3PTR_PRE
  %define RTCCPTR_CB        RTR3PTR_CB
 %endif
%endif



;; @def RTHCPHYS_DEF
; The pesudo-instruction used to declare an initialized host physical address.
%define RTHCPHYS_DEF    dq

;; @def RTHCPTR_RES
; The pesudo-instruction used to declare (=reserve space for) an uninitialized
; host physical address variable
%define RTHCPHYS_RES    resq

;; @def RTHCPTR_PRE
; The memory operand prefix used for a host physical address.
%define RTHCPHYS_PRE    qword

;; @def RTHCPHYS_CB
; The size in bytes of a host physical address.
%define RTHCPHYS_CB     8



;; @def RTGCPHYS_DEF
; The pesudo-instruction used to declare an initialized guest physical address.
%define RTGCPHYS_DEF    dq

;; @def RTGCPHYS_RES
; The pesudo-instruction used to declare (=reserve space for) an uninitialized
; guest physical address variable
%define RTGCPHYS_RES    resq

;; @def RTGCPTR_PRE
; The memory operand prefix used for a guest physical address.
%define RTGCPHYS_PRE    qword

;; @def RTGCPHYS_CB
; The size in bytes of a guest physical address.
%define RTGCPHYS_CB     8



;;
; The size of the long double C/C++ type.
; On 32-bit Darwin this is 16 bytes, on L4, Linux, OS/2 and Windows
; it's 12 bytes.
; @todo figure out what 64-bit Windows does (I don't recall right now).
%ifdef RT_ARCH_X86
 %ifdef RT_OS_DARWIN
  %define RTLRD_CB          16
 %else
  %define RTLRD_CB          12
 %endif
%else
  %define RTLRD_CB          16
%endif



;; @def ASM_CALL64_GCC
; Indicates that we're using the GCC 64-bit calling convention.
; @see @ref sec_vboxrem_amd64_compare (in VBoxREMWrapper.cpp) for an ABI description.

;; @def ASM_CALL64_MSC
; Indicates that we're using the Microsoft 64-bit calling convention (fastcall on steroids).
; @see @ref sec_vboxrem_amd64_compare (in VBoxREMWrapper.cpp) for an ABI description.

; Note: On X86 we're using cdecl unconditionally. There is not yet any common
; calling convention on AMD64, that's why we need to support two different ones.)

%ifdef RT_ARCH_AMD64
 %ifndef ASM_CALL64_GCC
  %ifndef ASM_CALL64_MSC
   ; define it based on the object format.
   %ifdef ASM_FORMAT_PE
    %define ASM_CALL64_MSC
   %else
    %define ASM_CALL64_GCC
   %endif
  %endif
 %else
  ; sanity check.
  %ifdef ASM_CALL64_MSC
   %error "Only one of the ASM_CALL64_* defines should be defined!"
  %endif
 %endif
%endif


;; @def RT_NOCRT
; Symbol name wrapper for the No-CRT bits.
;
; In order to coexist in the same process as other CRTs, we need to
; decorate the symbols such that they don't conflict the ones in the
; other CRTs. The result of such conflicts / duplicate symbols can
; confuse the dynamic loader on unix like systems.
;
; @remark Always feed the name to this macro first and then pass the result
;         on to the next *NAME* macro.
;
%ifndef RT_WITHOUT_NOCRT_WRAPPERS
 %define RT_NOCRT(name) nocrt_ %+ name
%else
 %define RT_NOCRT(name) name
%endif

;; @def RT_NOCRT_BEGINPROC
; Starts a NOCRT procedure, taking care of name wrapping and aliasing.
;
; Aliasing (weak ones, if supported) will be created when RT_WITH_NOCRT_ALIASES
; is defined and RT_WITHOUT_NOCRT_WRAPPERS isn't.
;
%macro RT_NOCRT_BEGINPROC 1
%ifdef RT_WITH_NOCRT_ALIASES
BEGINPROC RT_NOCRT(%1)
%ifdef ASM_FORMAT_ELF
global NAME(%1)
weak NAME(%1)
NAME(%1):
%else
GLOBALNAME %1
%endif
%else  ; !RT_WITH_NOCRT_ALIASES
BEGINPROC RT_NOCRT(%1)
%endif ; !RT_WITH_NOCRT_ALIASES
%endmacro ; RT_NOCRT_BEGINPROC

%ifdef RT_WITH_NOCRT_ALIASES
 %ifdef RT_WITHOUT_NOCRT_WRAPPERS
  %error "RT_WITH_NOCRT_ALIASES and RT_WITHOUT_NOCRT_WRAPPERS doesn't mix."
 %endif
%endif



;; @def xCB
; The stack unit size  / The register unit size.

;; @def xSP
; The stack pointer register (RSP or ESP).

;; @def xBP
; The base pointer register (RBP or ESP).

;; @def xAX
; RAX or EAX depending on context.

;; @def xBX
; RBX or EBX depending on context.

;; @def xCX
; RCX or ECX depending on context.

;; @def xDX
; RDX or EDX depending on context.

;; @def xDI
; RDI or EDI depending on context.

;; @def xSI
; RSI or ESI depending on context.

;; @def xWrtRIP
; 'wrt rip' for AMD64 targets, nothing for x86 ones.

%ifdef RT_ARCH_AMD64
 %define xCB 8
 %define xSP rsp
 %define xBP rbp
 %define xAX rax
 %define xBX rbx
 %define xCX rcx
 %define xDX rdx
 %define xDI rdi
 %define xSI rsi
 %define xWrtRIP wrt rip
%else
 %define xCB 4
 %define xSP esp
 %define xBP ebp
 %define xAX eax
 %define xBX ebx
 %define xCX ecx
 %define xDX edx
 %define xDI edi
 %define xSI esi
 %define xWrtRIP
%endif


;
; Some simple compile time assertions.
;
; Note! Requires new kBuild to work.
;

;;
; Structure size assertion macro.
%define AssertCompileSize(a_Type, a_Size) AssertCompileSizeML a_Type, a_Size
%macro AssertCompileSizeML 2,
 %ifndef KBUILD_GENERATING_MAKEFILE_DEPENDENCIES
  %assign AssertVar_cbActual   %1 %+ _size
  %assign AssertVar_cbExpected %2
  %if AssertVar_cbActual != AssertVar_cbExpected
   %error %1 is AssertVar_cbActual bytes instead of AssertVar_cbExpected
  %endif
 %endif
%endmacro

;;
; Structure memember offset assertion macro.
%define AssertCompileMemberOffset(a_Type, a_Member, a_off) AssertCompileMemberOffsetML a_Type, a_Member, a_off
%macro AssertCompileMemberOffsetML 3,
 %ifndef KBUILD_GENERATING_MAKEFILE_DEPENDENCIES
  %assign AssertVar_offActual   %1 %+ . %+ %2
  %assign AssertVar_offExpected %3
  %if AssertVar_offActual != AssertVar_offExpected
   %error %1 %+ . %+ %2 is at AssertVar_offActual instead of AssertVar_offExpected
  %endif
 %endif
%endmacro

%endif