#! /bin/sh

# This is a script for the use of PCRE2 maintainers. It configures and builds
# PCRE2 with a variety of configuration options, and in each case runs the
# tests to ensure that all goes well. Every possible combination would take far
# too long, so we use a representative sample. This script should be run in the
# PCRE2 source directory.

# While debugging, it is sometimes useful to be able to cut out some of the
# tests, in order to run those that are giving errors. The following options
# do this:
#
# -noasan         skip the test that uses -fsanitize=address
# -nousan         skip the test that uses -fsanitize=undefined
# -nodebug        skip the test that uses --enable-debug
# -nojit          skip all JIT tests
# -nojitmain      skip non-valgrind JIT tests
# -nojitvalgrind  skip JIT tests with valgrind
# -nomain         skip all the main (non-JIT) set of tests
# -nomainvalgrind skip the main (non-JIT) valgrind tests
# -notmp          skip the tests in a temporary directory
# -notmpjit       skip the JIT test in a temporary directory
# -novalgrind     skip all the valgrind tests

# Alternatively, if any of those names are given with '+' instead of '-no',
# only those groups named with '+' are run (e.g. +jit). If -dummy is given,
# no tests are actually run - this provides a means of testing the selectors.

# The -v option causes a call to 'pcre2test -C' to happen for each
# configuration.

useasan=1
useusan=1
usedebug=1
usejit=1
usejitvalgrind=1
usemain=1
usemainvalgrind=1
usetmp=1
usetmpjit=1
usevalgrind=1

dummy=0
seenplus=0
verbose=0

while [ $# -gt 0 ] ; do
  case $1 in
    +*) if [ $seenplus -eq 0 ]; then
          useasan=0
          useusan=0
          usedebug=0
          usejit=0
          usejitvalgrind=0
          usemain=0
          usemainvalgrind=0
          usetmp=0
          usetmpjit=0 
          usevalgrind=0 
          seenplus=1
        fi;;
  esac

  case $1 in
    -dummy)          dummy=1;;
    -v)              verbose=1;;
    -noasan)         useasan=0;;
    -nousan)         useusan=0;;
    -nodebug)        usedebug=0;;
    -nojit)          usejit=0; usejitvalgrind=0; usetmpjit=0;;
    -nojitmain)      usejit=0;;
    -nojitvalgrind)  usejitvalgrind=0;;
    -nomain)         usemain=0; usemainvalgrind=0;;
    -nomainvalgrind) usemainvalgrind=0;;
    -notmp)          usetmp=0; usetmpjit=0;;
    -notmpjit)       usetmpjit=0;;
    -novalgrind)     usevalgrind=0;;
    +asan)           useasan=1;;
    +usan)           useusan=1;;
    +debug)          usedebug=1;;
    +jit)            usejit=1; usejitvalgrind=1; usetmpjit=1;;
    +jitmain)        usejit=1;;
    +jitvalgrind)    usejitvalgrind=1;;
    +main)           usemain=1; usemainvalgrind=1;;
    +mainvalgrind)   usemainvalgrind=1;;
    +tmp)            usetmp=1;;
    +tmpjit)         usetmpjit=1;;
    +valgrind)       usevalgrind=1; usejitvalgrind=1; usemainvalgrind=1;;
    *)               echo "Unknown option '$1'"; exit 1;;
  esac
  shift
done

if [ $usejitvalgrind -eq 0 -a $usemainvalgrind -eq 0 ] ; then
  usevalgrind=0
fi

# This is in case the caller has set aliases (as I do - PH)

unset cp ls mv rm

# This is a temporary directory for testing out-of-line builds

tmp=/tmp/pcre2testing

# Don't bother with compiler optimization for most tests; it just slows down
# compilation a lot (and running the tests themselves is quick). However, one
# special test turns optimization on, because it can provoke some compiler
# warnings.

CFLAGS="-g"
OFLAGS="-O0"
ISGCC=0

# If the compiler is gcc, add a lot of warning switches.

cc --version >/tmp/pcre2ccversion 2>/dev/null
if [ $? -eq 0 ] && grep GCC /tmp/pcre2ccversion >/dev/null; then
  ISGCC=1
  CFLAGS="$CFLAGS -Wall"
  CFLAGS="$CFLAGS -Wno-overlength-strings"
  CFLAGS="$CFLAGS -Wpointer-arith"
  CFLAGS="$CFLAGS -Wwrite-strings"
  CFLAGS="$CFLAGS -Wundef -Wshadow"
  CFLAGS="$CFLAGS -Wmissing-field-initializers"
  CFLAGS="$CFLAGS -Wunused-parameter"
  CFLAGS="$CFLAGS -Wextra -Wformat"
  CFLAGS="$CFLAGS -Wbad-function-cast"
  CFLAGS="$CFLAGS -Wmissing-declarations"
  CFLAGS="$CFLAGS -Wnested-externs"
  CFLAGS="$CFLAGS -pedantic"
  CFLAGS="$CFLAGS -Wuninitialized"
  CFLAGS="$CFLAGS -Wmaybe-uninitialized"
  CFLAGS="$CFLAGS -Wmissing-prototypes"
  CFLAGS="$CFLAGS -Wstrict-prototypes"
  CFKAGS="$CFLAGS -Warray-bounds"
  CFLAGS="$CFLAGS -Wformat-overflow=2"
fi
rm -f /tmp/pcre2ccversion

# This function runs a single test with the set of configuration options that
# are in $opts. The source directory must be set in srcdir. The function must
# be defined as "runtest()" not "function runtest()" in order to run on
# Solaris.

runtest()
  {
  rm -f $srcdir/pcre2test $srcdir/pcre2grep $srcdir/pcre2_jit_test $srcdir/pcre2posix_test
  testcount=`expr $testcount + 1`

  if [ "$opts" = "" ] ; then
    echo "[$testcount/$testtotal] Configuring with: default settings"
  else
    echo "[$testcount/$testtotal] Configuring with:"
    echo "  $opts"
  fi

  if [ $dummy -eq 1 ]; then return; fi

  CFLAGS="$CFLAGS" \
    $srcdir/configure $opts >/dev/null 2>teststderrM
  if [ $? -ne 0 ]; then
    echo " "
    echo "******** Error while configuring ********"
    cat teststderrM
    exit 1
  fi

# There is an infelicity in the Autotools world (as of October 2015) which
# causes the message
#
# ar: `u' modifier ignored since `D' is the default (see `U')
#
# to be output while linking. This triggers an unwanted error report from this
# script, because it expects no stderr output while making. To get round this
# we filter the stderr output through sed, removing all occurrences of the
# above lines. Just for paranoia, check that sed is available before doing
# this.

  echo "Making"
  make -j >/dev/null 2>teststderrM
  makeRC=$?
  if command -v sed >/dev/null 2>&1 ; then
    sed "/\`u' modifier ignored since \`D' is the default/ d" \
      teststderrM > teststderrMM
    mv -f teststderrMM teststderrM
  fi
  if [ $makeRC -ne 0 -o -s teststderrM ]; then
    echo " "
    echo "******** Errors or warnings while making ********"
    echo " "
    cat teststderrM
    exit 1
  fi

  if [ $verbose -eq 1 ]; then
    ./pcre2test -C
  fi

  ./pcre2test -C jit >/dev/null
  jit=$?
  ./pcre2test -C pcre2-8 >/dev/null
  pcre2_8=$?

  echo "Running PCRE2 library tests $withvalgrind"
  $srcdir/RunTest $valgrind >teststdoutM 2>teststderrM

  if [ $? -ne 0 -o -s teststderrM ]; then
    echo " "
    echo "**** Test failed ****"
    if [ -s teststderrM ] ; then
      cat teststderrM
    else
      cat teststdoutM
    fi
    exit 1
  fi

  if [ $pcre2_8 -gt 0 ]; then
    echo "Running pcre2grep tests $withvalgrind"
    $srcdir/RunGrepTest $valgrind >teststdoutM 2>teststderrM
    if [ $? -ne 0 -o -s teststderrM ]; then
      echo " "
      echo "**** Test failed ****"
      cat teststderrM
      cat teststdoutM
      exit 1
    fi
    echo "Running pcre2posix test $withvalgrind"
    $valgrind ./pcre2posix_test >teststdoutM 2>teststderrM

    if [ $? -ne 0 ]; then
      echo " "
      echo "**** Test failed ****"
      exit 1
    fi
  else
    echo "Skipping pcre2grep and pcre2posix tests: 8-bit library not compiled"
  fi

  if [ "$jit" -gt 0 ]; then
    echo "Running JIT regression tests $withvalgrind"
    $jrvalgrind ./pcre2_jit_test >teststdoutM 2>teststderrM
    if [ $? -ne 0 -o -s teststderrM ]; then
      echo " "
      echo "**** Test failed ****"
      cat teststderrM
      cat teststdoutM
      exit 1
    fi
  else
    echo "Skipping JIT regression tests: JIT is not enabled"
  fi
  }

# Update the total count whenever a new test is added; it is used to show
# progess as each test is run.

testtotal=`expr 17 \* $usemain + \
  1 \* $usemain \* $usedebug + \
  1 \* $usetmp + 1 \* $usetmpjit + \
  1 \* $ISGCC \* $usemain + \
  1 \* $ISGCC \* $usemain \* $useasan + \
  1 \* $ISGCC \* $usemain \* $useusan + \
  13 \* $usejit + \
  2 \* $usemainvalgrind + \
  2 \* $usejitvalgrind`

testcount=0

if [ $testtotal -eq 0 ] ; then
  echo "** No tests selected"
  exit 1
fi

valgrind=
jrvalgrind=
withvalgrind=
srcdir=.
export srcdir

if [ $usejit -ne 0 ]; then
  enable_jit=--enable-jit
else
  enable_jit=
fi

# If gcc is in use, run a maximally configured test with -O2, because that can
# throw up warnings that are not detected with -O0. Then run a second test with
# -fsanitize=address, which also may throw up new warnings as well as checking
# things at runtime. Finally, run another test using -fsanitize=undefined
# -std-gnu99 to check for runtime actions that are not well defined.

if [ $ISGCC -ne 0 -a $usemain -ne 0 ]; then
  echo "---------- Maximally configured test with -O2 ----------"
  SAVECFLAGS="$CFLAGS"
  CFLAGS="-O2 $CFLAGS"
  echo "CFLAGS=$CFLAGS"
  opts="--disable-shared $enable_jit --enable-pcre2-16 --enable-pcre2-32"
  runtest
  if [ $useasan -ne 0 ]; then
    echo "---------- Maximally configured test with -fsanitize=address ----------"
# Following a kernel change, sanitize address doesn't work unless the extra
# PIE options are also set.
    CFLAGS="$OFLAGS $SAVECFLAGS -no-pie -fno-PIE -fsanitize=address"
    echo "CFLAGS=$CFLAGS"
    opts="--disable-shared $enable_jit --enable-pcre2-16 --enable-pcre2-32"
    runtest
  fi
# This also seems to be the case for sanitize undefined.
  if [ $useusan -ne 0 ]; then
    echo "------- Maximally configured test with -fsanitize=undefined -fno-sanitize=alignment -std=gnu99 -------"
    CFLAGS="$OFLAGS $SAVECFLAGS -no-pie -fno-PIE -fsanitize=undefined -fno-sanitize=alignment -std=gnu99"
    echo "CFLAGS=$CFLAGS"
    opts="--disable-shared $enable_jit --enable-pcre2-16 --enable-pcre2-32"
    runtest
  fi
  CFLAGS="$SAVECFLAGS"
fi

# This set of tests builds PCRE2 and runs the tests with a variety of configure
# options, in the current (source) directory. The empty configuration builds
# with all the default settings. As well as testing that these options work, we
# use --disable-shared or --disable-static except for the default test (which
# builds both) to save a bit of time by building only one version of the
# library for the subsequent tests.

echo "---------- CFLAGS for the remaining tests ----------"
CFLAGS="$OFLAGS $CFLAGS"
echo "CFLAGS=$CFLAGS"

if [ $usemain -ne 0 ]; then
  if [ $usedebug -ne 0 ]; then
    echo "---------- Maximally configured test with --enable-debug ----------"
    opts="--disable-shared $enable_jit --enable-pcre2-16 --enable-pcre2-32 --enable-debug"
    runtest
  fi

  echo "---------- Non-JIT tests in the current directory ----------"
  for opts in \
    "" \
    "--disable-static" \
    "--disable-shared" \
    "--disable-unicode --disable-shared --enable-never-backslash-C" \
    "--with-link-size=3 --disable-shared --disable-pcre2grep-callout" \
    "--disable-unicode --enable-rebuild-chartables --disable-shared" \
    "--disable-unicode --enable-newline-is-any --disable-shared" \
    "--disable-unicode --enable-newline-is-cr --disable-shared" \
    "--disable-unicode --enable-newline-is-crlf --disable-shared" \
    "--disable-unicode --enable-newline-is-anycrlf --enable-bsr-anycrlf --disable-shared" \
    "--enable-newline-is-any --disable-static" \
    "--disable-unicode --enable-pcre2-16" \
    "--enable-pcre2-16 --disable-shared" \
    "--disable-unicode --enable-pcre2-32" \
    "--enable-pcre2-32 --disable-shared" \
    "--disable-unicode --enable-pcre2-32 --enable-pcre2-16 --disable-shared" \
    "--disable-unicode --enable-pcre2-32 --enable-pcre2-16 --disable-pcre2-8 --disable-shared"
  do
    runtest
  done
fi

# Now run the JIT tests unless disabled

if [ $usejit -ne 0 ]; then
  echo "---------- JIT tests in the current directory ----------"
  for opts in \
    "--disable-unicode --enable-jit --disable-shared" \
    "--enable-jit --disable-shared" \
    "--enable-jit --with-link-size=3 --disable-shared" \
    "--enable-jit --enable-pcre2-16 --disable-shared" \
    "--disable-unicode --enable-jit --enable-pcre2-16 --disable-pcre2-8 --disable-shared" \
    "--enable-jit --enable-pcre2-16 --disable-pcre2-8 --disable-shared" \
    "--enable-jit --enable-pcre2-16 --with-link-size=3 --disable-shared" \
    "--enable-jit --enable-pcre2-16 --with-link-size=4 --disable-shared" \
    "--enable-jit --enable-pcre2-32 --disable-shared" \
    "--disable-unicode --enable-jit --enable-pcre2-32 --disable-pcre2-8 --disable-shared" \
    "--enable-jit --enable-pcre2-32 --disable-pcre2-8 --disable-shared" \
    "--enable-jit --enable-pcre2-32 --with-link-size=4 --disable-shared" \
    "--enable-jit --enable-pcre2-32 --enable-pcre2-16 --disable-pcre2-8 --enable-newline-is-anycrlf --enable-bsr-anycrlf --disable-shared"
  do
    runtest
  done
fi

# Now re-run some of the tests under valgrind.

if [ $usevalgrind -ne 0 ]; then
  echo "---------- Tests in the current directory using valgrind ----------"
  valgrind=valgrind
  withvalgrind="with valgrind"

  if [ $usemainvalgrind -ne 0 ]; then
    for opts in \
      "--disable-shared" \
      "--with-link-size=3 --enable-pcre2-16 --enable-pcre2-32 --disable-shared"
    do
      opts="--enable-valgrind $opts"
      runtest
    done
  fi

  if [ $usejitvalgrind -ne 0 ]; then
    jrvalgrind="valgrind --tool=memcheck -q --smc-check=all-non-file --suppressions=$srcdir/testdata/valgrind-jit.supp"
    for opts in \
      "--enable-jit --disable-shared" \
      "--enable-jit --enable-pcre2-16 --enable-pcre2-32"
    do
      opts="--enable-valgrind $opts"
      runtest
    done
  fi
fi

valgrind=
jrvalgrind=
withvalgrind=

# Clean up the distribution and then do at least one build and test in a
# directory other than the source directory. It doesn't work unless the
# source directory is cleaned up first.

if [ -f Makefile ]; then
  echo "Running 'make distclean'"
  make distclean >/dev/null 2>&1
  if [ $? -ne 0 ]; then
    echo "** 'make distclean' failed"
    exit 1
  fi
fi

echo "---------- End of tests in the source directory ----------"
echo "Removing teststdoutM and teststderrM"
rm -rf teststdoutM teststderrM

if [ $usetmp -ne 0 -o $usetmpjit -ne 0 ]; then
  srcdir=`pwd`
  export srcdir

  if [ ! -e $tmp ]; then
    mkdir $tmp
  fi

  if [ ! -d $tmp ]; then
    echo "** Failed to create $tmp or it is not a directory"
    exit 1
  fi

  cd $tmp
  if [ $? -ne 0 ]; then
    echo "** Failed to cd to $tmp"
    exit 1
  fi

  if [ $usetmp -ne 0 ]; then
    echo "---------- Tests in the $tmp directory ----------"
    for opts in \
      "--disable-shared"
    do
      runtest
    done
  fi   
  
  if [ $usetmpjit -ne 0 ]; then
    echo "---------- JIT tests in the $tmp directory ----------"
    for opts in \
      "--enable-jit --disable-shared"
    do
      runtest
    done
  fi

  echo "Removing $tmp"
  rm -rf $tmp
fi

echo "---------- All done ----------"

# End