#!/bin/sh
#
#  This is part of auto-configuration of the xcin-2.3 package.
# 
#         Written by Tung-Han Hsieh     May, 1997
#
#  Usage: configure.install [-root=root-dir] [-PREFIX=PREFIX] 
#			[-bin-PREFIX=PREFIX] [-x-font-PREFIX=PREFIX]

#
#  General setup.
#

for arg in $@; do
    case $arg in
    -root=*) 
	ROOTDIR=`echo $arg | sed 's/[-a-z]*=//'` ;;
    -prefix=*)
	PREFIX=`echo $arg | sed 's/[-a-z]*=//'` ;;
    -bin-prefix=*)
	BIN_PREFIX=`echo $arg | sed 's/[-a-z]*=//'` ;;
    -x-font-prefix=*)
	X_FONT_PREFIX=`echo $arg | sed 's/[-a-z]*=//'` ;;
    *)  echo "Invalid arguement $arg.  Stop."
	exit 1 ;;
    esac
done

test -z "ROOTDIR" && ROOTDIR=..

STATUSFILE=$ROOTDIR/install.status
ROOTDIR=$ROOTDIR/script
HELPFILE=$ROOTDIR/configure.Chelp

myecho() {
    echo "$1\c"
}
if [ -z "`echo -n test | grep n`" ]; then 
    ECHO='echo -n'
else
    ECHO='myecho'
fi


GetData() {
    grep $1 $STATUSFILE | sed "s%$1=%%"
}
if [ -f "$STATUSFILE" ]; then
    echo "ȡ趨 $STATUSFILE  ....."

    INSTALL_XCIN=`GetData INSTALL_XCIN`
    INSTALL_CRXVT=`GetData INSTALL_CRXVT`
    INSTALL_FONTS=`GetData INSTALL_FONTS`
    INSTALL_INPTABS=`GetData INSTALL_INPTABS`
    INSTALL_DOCS=`GetData INSTALL_DOCS`
    INSTALL_UTILS=`GetData INSTALL_UTILS`

    PATH_XCIN_BIN=`GetData PATH_XCIN_BIN`
    PATH_XCIN_DIR=`GetData PATH_XCIN_DIR`
    PATH_XCIN_MAN=`GetData PATH_XCIN_MAN`
    PATH_XCIN_CFONT=`GetData PATH_XCIN_CFONT`
    PATH_XCIN_EFONT=`GetData PATH_XCIN_EFONT`
    PATH_XCIN_ETEN=`GetData PATH_XCIN_ETEN`

    OPT_XCIN_DELETEK=`GetData OPT_XCIN_DELETEK`
    OPT_XCIN_CFONT=`GetData OPT_XCIN_CFONT`
    OPT_XCIN_EFONT=`GetData OPT_XCIN_EFONT`
    OPT_CRXVT_CFONT=`GetData OPT_CRXVT_CFONT`
    OPT_CRXVT_EFONT=`GetData OPT_CRXVT_EFONT`
    OPT_FONT_ET15=`GetData OPT_FONT_ET15`
    OPT_FONT_ET24K=`GetData OPT_FONT_ET24K`
    OPT_FONT_ET24L=`GetData OPT_FONT_ET24L`
    OPT_FONT_ET24S=`GetData OPT_FONT_ET24S`
    OPT_FONT_ET24M=`GetData OPT_FONT_ET24M`
    OPT_FONT_ET24R=`GetData OPT_FONT_ET24R`
    OPT_FONT_ET24B=`GetData OPT_FONT_ET24B`
    OPT_FONT_ETV8=`GetData OPT_FONT_ETV8`
    OPT_FONT_ETV12=`GetData OPT_FONT_ETV12`
    OPT_UTIL_CLIOBJ=`GetData OPT_UTIL_CLIOBJ`
    OPT_UTIL_ET2BDF=`GetData OPT_UTIL_ET2BDF`
    OPT_UTIL_CIN2TAB=`GetData OPT_UTIL_CIN2TAB`
    OPT_UTIL_TSINTOOLS=`GetData OPT_UTIL_TSINTOOLS`
    OPT_INPTAB_PINYIN=`GetData OPT_INPTAB_PINYIN`
    OPT_INPTAB_SHUANPIN=`GetData OPT_INPTAB_SHUANPIN`
    OPT_INPTAB_WUBI=`GetData OPT_INPTAB_WUBI`
    OPT_INPTAB_ZHIRANMA=`GetData OPT_INPTAB_ZHIRANMA`

else
    INSTALL_XCIN=yes
    INSTALL_CRXVT=yes
    INSTALL_FONTS=no
    INSTALL_INPTABS=yes
    INSTALL_DOCS=yes
    INSTALL_UTILS=yes

    PATH_XCIN_BIN=/usr/bin
    PATH_XCIN_DIR=/usr/lib/xcingb
    PATH_XCIN_MAN=/usr/share/man
    PATH_XCIN_CFONT=/usr/X11R6/lib/X11/fonts/misc
    PATH_XCIN_EFONT=/usr/X11R6/lib/X11/fonts/misc
    PATH_XCIN_ETEN=

    OPT_XCIN_DELETEK=0
    OPT_XCIN_CFONT=hanzigb16fs
    OPT_XCIN_EFONT=8x16
    OPT_CRXVT_CFONT=hanzigb16fs
    OPT_CRXVT_EFONT=8x16
    OPT_FONT_ET15=no
    OPT_FONT_ET24K=no
    OPT_FONT_ET24L=no
    OPT_FONT_ET24S=no
    OPT_FONT_ET24M=no
    OPT_FONT_ET24R=no
    OPT_FONT_ET24B=no
    OPT_FONT_ETV8=no
    OPT_FONT_ETV12=no
    OPT_UTIL_CLIOBJ=no
    OPT_UTIL_ET2BDF=no
    OPT_UTIL_CIN2TAB=yes
    OPT_UTIL_TSINTOOLS=no
    OPT_INPTAB_PINYIN=yes
    OPT_INPTAB_SHUANPIN=yes
    OPT_INPTAB_WUBI=yes
    OPT_INPTAB_ZHIRANMA=yes
fi

test ! -z "$PREFIX" && PATH_XCIN_BIN=`echo $PREFIX | sed 's/\/$//'`/bin \
		    && PATH_XCIN_DIR=`echo $PREFIX | sed 's/\/$//'`/xcin \
		    && PATH_XCIN_MAN=`echo $PREFIX | sed 's/\/$//'`/man 
test ! -z "$BIN_PREFIX" && PATH_XCIN_BIN=`echo $BIN_PREFIX | sed 's/\/$//'`/bin
test ! -z "$X_FONT_PREFIX" && PATH_XCIN_CFONT=`echo $X_FONT_PREFIX | sed 's/\/$//'`/chinese \
			   && PATH_XCIN_EFONT=`echo $X_FONT_PREFIX | sed 's/\/$//'`/misc

#
#  General functions.
#
PrintHelp() {
    echo "<<<  $1  >>>" >&2
    echo >&2
    grep "$1" $HELPFILE | sed "s/$1://" >&2
    echo >&2
    $ECHO ' return  .....' >&2
    read ch3
}
AskForYesNo() {
    if [ "$1" = 'yes' ]; then
	ch2=no
    else
	ch2=yes
    fi
}
AskForPath() {
    cnt=0
    if [ "$3" = '0' ]; then
	ch3=$3
    else
        for f in $2; do echo [$cnt]$f; cnt=`expr $cnt + 1`; done
        $ECHO 'ѡ: '
        read ch3
    fi
    if [ $ch3 -lt $3 ]; then 
	cnt=0
	for f in $2; do
	    test "$ch3" = "$cnt" && ch2=$f && break
	    cnt=`expr $cnt + 1`
	done
    elif [ "$ch3" = "$3" ]; then
        echo " $1 ·: " >&2
        read ch2
    else
	ch2=
    fi
}
MainOptions() {
    grep $2 $HELPFILE | sed "s/$2://" >&2
    echo ' "H" οϸĸ˵' >&2
    echo >&2
    $ECHO "Ҫװ $1 ʽ[y/n/h]? " >&2
}

#
#  Main Program.
#
ch=0

WithoutSave=0
while [ "$ch" != 's' ] && [ "$ch" != 'S' ]; do
    fontopts=
if [ ! -z "$PATH_XCIN_ETEN" ]; then
    if [ "$OPT_FONT_ET15" = 'yes' ]; then fontopts="$fontopts et15"; fi 
    if [ "$OPT_FONT_ET24K" = 'yes' ]; then fontopts="$fontopts et24k"; fi 
    if [ "$OPT_FONT_ET24L" = 'yes' ]; then fontopts="$fontopts et24l"; fi
    if [ "$OPT_FONT_ET24S" = 'yes' ]; then fontopts="$fontopts et24s"; fi
    if [ "$OPT_FONT_ET24M" = 'yes' ]; then fontopts="$fontopts et24m"; fi
    if [ "$OPT_FONT_ET24R" = 'yes' ]; then fontopts="$fontopts et24r"; fi
    if [ "$OPT_FONT_ET24B" = 'yes' ]; then fontopts="$fontopts et24b"; fi
    if [ "$OPT_FONT_ETV8" = 'yes' ]; then fontopts="$fontopts etv8"; fi
    if [ "$OPT_FONT_ETV12" = 'yes' ]; then fontopts="$fontopts etv24"; fi
else
    OPT_FONT_ET15=no
    OPT_FONT_ET24K=no
    OPT_FONT_ET24L=no
    OPT_FONT_ET24S=no
    OPT_FONT_ET24M=no
    OPT_FONT_ET24R=no
    OPT_FONT_ET24B=no
    OPT_FONT_ETV8=no
    OPT_FONT_ETV12R=no
fi

    utilopts=
    if [ "$OPT_UTIL_CIN2TAB" = 'yes' ]; then utilopts="$utilopts cin2tab"; fi
    if [ "$OPT_UTIL_TSINTOOLS" = 'yes' ]; then utilopts="$utilopts tsintools"; fi
    if [ "$OPT_UTIL_CLIOBJ" = 'yes' ]; then utilopts="$utilopts cliobj"; fi
    if [ "$OPT_UTIL_ET2BDF" = 'yes' ]; then utilopts="$utilopts et2bdf"; fi

    inptabopts=
    if [ "$OPT_INPTAB_PINYIN" = 'yes' ]; then inptabopts="$inptabopts pinyin"; fi
    if [ "$OPT_INPTAB_SHUANPIN" = 'yes' ]; then inptabopts="$inptabopts shuangpin"; fi
    if [ "$OPT_INPTAB_WUBI" = 'yes' ]; then inptabopts="$inptabopts wubi"; fi
    if [ "$OPT_INPTAB_ZHIRANMA" = 'yes' ]; then inptabopts="$inptabopts ziranma"; fi

    cat >&2 << EOF
<<< ӭ XCIN-2.3 Զ趨װʽ >>>
ʽ:
   [X]Xcin  ------------------  <${INSTALL_XCIN}>
      װѡ: Ԥ=$OPT_XCIN_CFONT ԤӢ=$OPT_XCIN_EFONT Delete_K=$OPT_XCIN_DELETEK
   [C]Crxvt  -----------------  <${INSTALL_CRXVT}>
      װѡ: Ԥ=$OPT_CRXVT_CFONT ԤӢ=$OPT_CRXVT_EFONT
   [F]  ------------------  <${INSTALL_FONTS}>
      װѡ: $fontopts
   [I]뷨  ----------  <${INSTALL_INPTABS}>
      װѡ: $inptabopts
   [D]˵ļ  --------------  <${INSTALL_DOCS}>
      װѡ: <>
   [U]߳ʽ  --------------  <${INSTALL_UTILS}>
      װѡ: $utilopts
װ·:
   [1]Ҫִе·:    $PATH_XCIN_BIN
   [2]Xcin ϵ·:   $PATH_XCIN_DIR
   [3]ϲοļ·:  $PATH_XCIN_MAN
   [4]·:      $PATH_XCIN_CFONT
   [5]Ӣ·:      $PATH_XCIN_EFONT
   [6]ϵͳ·:  $PATH_XCIN_ETEN
[H]˵;   [S]ʼϵͳ;   [Q]뿪ʽװ;

EOF
$ECHO 'ѡ [CDFHISQUX123456] : '

#read ch
ch=s
echo

case $ch in
x|X) 
  while [ 1 ]; do
     MainOptions xcin XCIN_SHORT
     read ch1
     if [ "$ch1" = 'y' ] || [ "$ch1" = 'Y' ]; then
	 INSTALL_XCIN=yes
         ch1=0
         while [ "$ch1" != 'M' ] && [ "$ch1" != 'm' ]; do
	     echo >&2
	     echo "װѡ: [0]Ԥ=$OPT_XCIN_CFONT" >&2
	     echo "          [1]ԤӢ=$OPT_XCIN_EFONT" >&2
	     echo "          [2]Delete_K=$OPT_XCIN_DELETEK" >&2
             echo "          [M]صѡ" >&2
             $ECHO "ѡ [012M]: " >&2
             read ch1
	     case $ch1 in
	       0) $ECHO ' xcin Ԥ: ' >&2
		  read ch2
		  test ! -z $ch1 && OPT_XCIN_CFONT=$ch2
		  ;;
	       1) $ECHO ' xcin ԤӢ: ' >&2
		  read ch2
		  test ! -z $ch1 && OPT_XCIN_EFONT=$ch2
		  ;;
	       2) if [ "$OPT_XCIN_DELETEK" = 1 ]; then
		      OPT_XCIN_DELETEK=0
		  else
		      OPT_XCIN_DELETEK=1
		  fi
		  ;;
	     esac
	 done
	 break;
     elif [ "$ch1" = 'n' ] || [ "$ch1" = 'N' ]; then
	 INSTALL_XCIN=no
 	 break;
     elif [ "$ch1" = 'h' ] || [ "$ch1" = 'H' ]; then
	 PrintHelp XCIN_HELP
     fi
  done
  ;;

c|C) 
  while [ 1 ]; do
     MainOptions crxvt CRXVT_SHORT
     read ch1
     if [ "$ch1" = 'y' ] || [ "$ch1" = 'Y' ]; then
         INSTALL_CRXVT=yes
         ch1=0
         while [ "$ch1" != 'M' ] && [ "$ch1" != 'm' ]; do
	     echo >&2
	     echo "װѡ: [0]Ԥ=$OPT_CRXVT_CFONT" >&2
	     echo "          [1]ԤӢ=$OPT_CRXVT_EFONT" >&2
             echo "          [M]صѡ" >&2
             $ECHO "ѡ [01M]: " >&2
             read ch1
	     case $ch1 in
	       0) $ECHO ' crxvt Ԥ: ' >&2
		  read ch2
		  test ! -z $ch1 && OPT_CRXVT_CFONT=$ch2
		  ;;
	       1) $ECHO ' crxvt ԤӢ: ' >&2
		  read ch2
		  test ! -z $ch1 && OPT_CRXVT_EFONT=$ch2
		  ;;
	     esac
	 done
	 break;
     elif [ "$ch1" = 'n' ] || [ "$ch1" = 'N' ]; then
         INSTALL_CRXVT=no
	 break;
     elif [ "$ch1" = 'h' ] || [ "$ch1" = 'H' ]; then
	 PrintHelp CRXVT_HELP
     fi
  done
  ;;

f|F) 
if [ -z "$PATH_XCIN_ETEN" ]; then
  MainOptions fonts FONTS_SHORT
  read ch1
  if [ "$ch1" = 'y' ] || [ "$ch1" = 'Y' ]; then
    INSTALL_FONTS=yes
    echo
    echo 'dzǸĿǰ xcin-2.3.02 ֻת͡'
    echo 'δϵͳȷ·˱ configure ʽ'
    echo 'ûϵͳ޷ʹñ趨ڴҲΪ'
    echo '׼һײõ hku-ch16 ͣ'
    echo 'Ҳȷʹ xcin  crxvt ǽᾡҵ'
    echo ' FREE ͣϵδ xcin ϵͳС'
    echo
    echo '밲װͣԽ xcin-2.3.02/fonts/'
    echo 'Ŀ¼УװʽԶִаװΪ¼'
    echo 'ǵñдһ fonts.alias ϸ'
    echo 'xcin-2.3.02/docs/howto/Xfonts.HOWTO(.ps) ļ'
    echo
    echo '밴һ .....'
    read ch3
  else
    INSTALL_FONTS=no
  fi
else
  while [ 1 ]; do
     MainOptions  FONTS_SHORT
     read ch1
     if [ "$ch1" = 'y' ] || [ "$ch1" = 'Y' ]; then
         INSTALL_FONTS=yes

	 ch1=0
	 while [ "$ch1" != 'm' ] && [ "$ch1" != 'M' ]; do
	     echo >&2
	     cat >&2 <<EOF
װѡ: [1] 15  ------------------ <${OPT_FONT_ET15}>
          [2] 24  -------------- <${OPT_FONT_ET24K}>
          [3] 24  -------------- <${OPT_FONT_ET24S}>
          [4] 24  -------------- <${OPT_FONT_ET24M}>
          [5] 24  -------------- <${OPT_FONT_ET24B}>
          [6] 24  -------------- <${OPT_FONT_ET24L}>
          [7] 24 Բ -------------- <${OPT_FONT_ET24R}>
          [8] vga8x15 Ӣ --------- <${OPT_FONT_ETV8}>
          [9] vga12x24 Ӣ -------- <${OPT_FONT_ETV12}>
EOF
	     echo "          [M]صѡ" >&2
	     if [ ! -z "$PATH_XCIN_ETEN" ]; then
		 $ECHO 'ѡ [0123456789M]: ' >&2
	     else
		 $ECHO 'ѡ [0M]: ' >&2
	     fi

	     ch2=
	     read ch1
	     case $ch1 in
	     1) AskForYesNo $OPT_FONT_ET15
		if [ ! -z "$PATH_XCIN_ETEN" ]; then OPT_FONT_ET15=$ch2; fi
		;;
	     2) AskForYesNo $OPT_FONT_ET24K
		if [ ! -z "$PATH_XCIN_ETEN" ]; then OPT_FONT_ET24K=$ch2; fi
		;;
	     3) AskForYesNo $OPT_FONT_ET24S
		if [ ! -z "$PATH_XCIN_ETEN" ]; then OPT_FONT_ET24S=$ch2; fi
		;;
	     4) AskForYesNo $OPT_FONT_ET24M
		if [ ! -z "$PATH_XCIN_ETEN" ]; then OPT_FONT_ET24M=$ch2; fi
		;;
	     5) AskForYesNo $OPT_FONT_ET24B
		if [ ! -z "$PATH_XCIN_ETEN" ]; then OPT_FONT_ET24B=$ch2; fi
		;;
	     6) AskForYesNo $OPT_FONT_ET24L
		if [ ! -z "$PATH_XCIN_ETEN" ]; then OPT_FONT_ET24L=$ch2; fi
		;;
	     7) AskForYesNo $OPT_FONT_ET24R
		if [ ! -z "$PATH_XCIN_ETEN" ]; then OPT_FONT_ET24R=$ch2; fi
		;;
	     8) AskForYesNo $OPT_FONT_ETV8
		if [ ! -z "$PATH_XCIN_ETEN" ]; then OPT_FONT_ETV8=$ch2; fi
		;;
	     9) AskForYesNo $OPT_FONT_ETV12
		if [ ! -z "$PATH_XCIN_ETEN" ]; then OPT_FONT_ETV12=$ch2; fi
		;;
	     esac
         done
	 break;
     elif [ "$ch1" = 'n' ] || [ "$ch1" = 'N' ]; then
         INSTALL_FONTS=no
         OPT_FONT_ET15=no
         OPT_FONT_ET24K=no
         OPT_FONT_ET24L=no
         OPT_FONT_ET24S=no
         OPT_FONT_ET24M=no
         OPT_FONT_ET24R=no
         OPT_FONT_ET24B=no
         OPT_FONT_ETV8=no
         OPT_FONT_ETV12=no
	 break;
     elif [ "$ch1" = 'h' ] || [ "$ch1" = 'H' ]; then
	 PrintHelp FONTS_HELP
     fi
  done
fi
  ;;

i|I) 
  while [ 1 ]; do
     MainOptions '뷨' INPTAB_SHORT
     read ch1
     if [ "$ch1" = 'y' ] || [ "$ch1" = 'Y' ]; then
	 INSTALL_INPTABS=yes

	 ch1=0
	 while [ "$ch1" != 'm' ] && [ "$ch1" != 'M' ]; do
$ECHO 'װѡ: [0]뷨 ---------- '; echo "<${OPT_INPTAB_PINYIN}>"
$ECHO '          [1]עѯ ---------- '; echo "<${OPT_INPTAB_SHUANPIN}>"
$ECHO '          [2]ƴ뷨 ---------- '; echo "<${OPT_INPTAB_WUBI}>"
$ECHO '          [3]߼Ϻײѯ -------- '; echo "<${OPT_INPTAB_ZHIRANMA}>"

	     echo "          [M]صѡ" >&2
		 $ECHO 'ѡ [0123M]: ' >&2

	     inptabopts=
	     read ch1
	     case $ch1 in
	     0) AskForYesNo $OPT_INPTAB_PINYIN
		OPT_INPTAB_PINYIN=$ch2
		;;
	     1) AskForYesNo $OPT_INPTAB_SHUANPIN
		OPT_INPTAB_SHUANPIN=$ch2
		;;
	     2) AskForYesNo $OPT_INPTAB_WUBI
		OPT_INPTAB_WUBI=$ch2
		;;
	     3) AskForYesNo $OPT_INPTAB_ZHIRANMA
		OPT_INPTAB_ZHIRANMA=$ch2
		;;
	     esac
	 done
	 break;
     elif [ "$ch1" = 'n' ] || [ "$ch1" = 'N' ]; then
         INSTALL_INPTABS=no
         OPT_INPTAB_PINYIN=no
         OPT_INPTAB_SHUANPIN=no
         OPT_INPTAB_WUBI=no
         OPT_INPTAB_ZHIRANMA=no
	 break;
     elif [ "$ch1" = 'h' ] || [ "$ch1" = 'H' ]; then
	 PrintHelp INPTAB_HELP
     fi
  done
  ;;


d|D) 
  while [ 1 ]; do
     MainOptions ˵ļ DOCS_SHORT
     read ch1
     if [ "$ch1" = 'y' ] || [ "$ch1" = 'Y' ]; then
         INSTALL_DOCS=yes
	 break;
     elif [ "$ch1" = 'n' ] || [ "$ch1" = 'N' ]; then
         INSTALL_DOCS=no
	 break;
     elif [ "$ch1" = 'h' ] || [ "$ch1" = 'H' ]; then
	 PrintHelp DOCS_HELP
     fi
  done
  ;;

u|U)
  while [ 1 ]; do 
     MainOptions ߳ʽ UTILS_SHORT
     read ch1
     if [ "$ch1" = 'y' ] || [ "$ch1" = 'Y' ]; then
         INSTALL_UTILS=yes

	 ch1=0
	 while [ "$ch1" != 'm' ] && [ "$ch1" != 'M' ]; do
	     cat >&2 <<EOF
Options: [0]cin2tab: 뷨תʽ -------------------- <${OPT_UTIL_CIN2TAB}>
         [1]tsintools: 뷨ʽ ------------------ <${OPT_UTIL_TSINTOOLS}>
         [2]cliobj: xcin ŷӦóʽĽģ -------- <${OPT_UTIL_CLIOBJ}>
         [3]et2bdf: ת .bdf ͳʽ  ---------- <${OPT_UTIL_ET2BDF}>
         [M]صѡ
EOF
	     $ECHO "ѡ [0123M]: "
	     read ch1
	     utilopts=
	     case $ch1 in
	     0) AskForYesNo $OPT_UTIL_CIN2TAB
		OPT_UTIL_CIN2TAB=$ch2
		;;
	     1) AskForYesNo $OPT_UTIL_TSINTOOLS
		OPT_UTIL_TSINTOOLS=$ch2
		;;
	     2) AskForYesNo $OPT_UTIL_CLIOBJ
		OPT_UTIL_CLIOBJ=$ch2
		;;
	     3) AskForYesNo $OPT_UTIL_ET2BDF
		OPT_UTIL_ET2BDF=$ch2
		;;
	     esac
         done
	 break;
     elif [ "$ch1" = 'n' ] || [ "$ch1" = 'N' ]; then
         INSTALL_UTILS=no
         OPT_UTIL_CLIOBJ=no
         OPT_UTIL_ET2BDF=no
         OPT_UTIL_CIN2TAB=no
         OPT_UTIL_TSINTOOLS=no
	 break;
     elif [ "$ch1" = 'h' ] || [ "$ch1" = 'H' ]; then
	 PrintHelp UTILS_HELP
     fi
  done
  ;;


h|H) $ECHO 'ѡ [CDFIUX123456] ? '
     read ch1

     case $ch1 in
     x|X) PrintHelp XCIN_HELP
          ;;
     c|C) PrintHelp CRXVT_HELP
	  ;;
     f|F) PrintHelp FONTS_HELP
	  ;;
     d|D) PrintHelp DOCS_HELP
          ;;
     u|U) PrintHelp UTILS_HELP
	  ;;
     i|I) PrintHelp INPTAB_HELP
	  ;;
     1|2|3|4|5|6) PrintHelp PATHS_HELP
	  ;;
     esac
     ;;

  1) pathlist=
     pathcnt=0
     test ! -z "$BIN_PREFIX" && pathlist="$pathlist $BIN_PREFIX" && pathcnt=`expr $pathcnt + 1`
     test ! -z "$PREFIX" && pathlist="$pathlist $PREFIX/bin" && pathcnt=`expr $pathcnt + 1`
     for f in /usr/local/bin /usr/X11/bin /usr/bin $HOME/bin /usr/ucb/bin /bin; do
	 if [ $pathcnt -lt 5 ] && [ -d "$f" ]; then 
	     test ! -z "$BIN_PREFIX" -a "$f" = "$BIN_PREFIX" && continue
	     test ! -z "$PREFIX" -a "$f" = "$PREFIX/bin" && continue
	     pathlist="$pathlist $f" 
	     pathcnt=`expr $pathcnt + 1`
	 else
	     break;
	 fi
     done
     pathlist="$pathlist "
     AskForPath 'ִе' "$pathlist" $pathcnt
     test ! -z "$ch2" && PATH_XCIN_BIN=$ch2
     ;;
  2) pathlist=
     pathcnt=0
     test ! -z "$PREFIX" && pathlist="$pathlist $PREFIX/lib/xcin" && pathcnt=`expr $pathcnt + 1`
     for f in /usr/local/lib /usr/X11/lib/X11 /usr/lib $HOME/lib /usr/ucb/lib; do
	 if [ $pathcnt -lt 5 ] && [ -d "$f" ]; then 
	     test ! -z "$PREFIX" -a "$f" = "$PREFIX/lib" && continue
	     pathlist="$pathlist $f/xcin" 
	     pathcnt=`expr $pathcnt + 1`
	 else
	     break;
	 fi
     done
     pathlist="$pathlist "
     AskForPath 'xcin ϵ' "$pathlist" $pathcnt
     test ! -z "$ch2" && PATH_XCIN_DIR=$ch2
     ;;
  3) pathlist=
     pathcnt=0
     test ! -z "$PREFIX" && pathlist="$pathlist $PREFIX/man" && pathcnt=`expr $pathcnt + 1`
     for f in /usr/local/man /usr/X11/man /usr/man $HOME/man /usr/ucb/man; do
	 if [ $pathcnt -lt 5 ] && [ -d "$f" ]; then 
	     test ! -z "$PREFIX" -a "$f" = "$PREFIX/lib" && continue
	     pathlist="$pathlist $f" 
	     pathcnt=`expr $pathcnt + 1`
	 else
	     break;
	 fi
     done
     pathlist="$pathlist "
     AskForPath 'ϲοļ (man page)' "$pathlist" $pathcnt
     test ! -z "$ch2" && PATH_XCIN_MAN=$ch2
     ;;
  4) pathlist=
     pathcnt=0
     test ! -z "$X_FONT_PREFIX" && pathlist="$pathlist $X_FONT_PREFIX/chinese" && pathcnt=`expr $pathcnt + 1`
     for f in /usr/X11/lib/fonts/chinese /usr/X11/lib/fonts/misc /usr/X11/lib/fonts $HOME/fonts; do
	 if [ $pathcnt -lt 5 ] && [ -d "$f" ]; then 
	     test ! -z "$X_FONT_PREFIX" -a "$f" = "$X_FONT_PREFIX/chinese" && continue
	     pathlist="$pathlist $f" 
	     pathcnt=`expr $pathcnt + 1`
	 else
	     break;
	 fi
     done
     pathlist="$pathlist "
     AskForPath '' "$pathlist" $pathcnt
     test ! -z "$ch2" && PATH_XCIN_CFONT=$ch2
     ;;
  5) pathlist=
     pathcnt=0
     test ! -z "$X_FONT_PREFIX" && pathlist="$pathlist $X_FONT_PREFIX/misc" && pathcnt=`expr $pathcnt + 1`
     for f in /usr/X11/lib/fonts/misc /usr/X11/lib/fonts/chinese /usr/X11/lib/fonts $HOME/fonts; do
	 if [ $pathcnt -lt 5 ] && [ -d "$f" ]; then 
	     test ! -z "$X_FONT_PREFIX" -a "$f" = "$X_FONT_PREFIX/misc" && continue
	     pathlist="$pathlist $f" 
	     pathcnt=`expr $pathcnt + 1`
	 else
	     break;
	 fi
     done
     pathlist="$pathlist "
     AskForPath 'Ӣ' "$pathlist" $pathcnt
     test ! -z "$ch2" && PATH_XCIN_EFONT=$ch2
     ;;
  6) pathlist=
     pathcnt=0
     for f in /msdos/et3 /dos/et3 /tmp/et3; do
	 if [ $pathcnt -lt 5 ] && [ -d "$f" ]; then 
	     pathlist="$pathlist $f" 
	     pathcnt=`expr $pathcnt + 1`
	 else
	     break;
	 fi
     done
     pathlist="$pathlist "
     AskForPath 'ϵͳ' "$pathlist" $pathcnt
     if [ ! -z "$ch2" ] && [ ! -d "$ch2" ]; then
	 echo >&2
	 $ECHO "ָ·.  return  ....." >&2
	 read ch3
     else
	 PATH_XCIN_ETEN=$ch2
     fi
     ;;
q|Q) WithoutSave=1
     exit 1
     ;;
esac
done


#
#  Writing the configuration into the `install.status' file.
#
if [ -f $STATUSFILE ] && [ "$WithoutSave" = 1 ]; then
    exit 0
fi

rm -f $STATUSFILE
cat > $STATUSFILE <<EOF
INSTALL_XCIN=$INSTALL_XCIN
INSTALL_CRXVT=$INSTALL_CRXVT
INSTALL_FONTS=$INSTALL_FONTS
INSTALL_INPTABS=$INSTALL_INPTABS
INSTALL_DOCS=$INSTALL_DOCS
INSTALL_UTILS=$INSTALL_UTILS

PATH_XCIN_BIN=$PATH_XCIN_BIN
PATH_XCIN_DIR=$PATH_XCIN_DIR
PATH_XCIN_MAN=$PATH_XCIN_MAN
PATH_XCIN_CFONT=$PATH_XCIN_CFONT
PATH_XCIN_EFONT=$PATH_XCIN_EFONT
PATH_XCIN_ETEN=$PATH_XCIN_ETEN

OPT_XCIN_DELETEK=$OPT_XCIN_DELETEK
OPT_XCIN_CFONT=$OPT_XCIN_CFONT
OPT_XCIN_EFONT=$OPT_XCIN_EFONT
OPT_CRXVT_CFONT=$OPT_CRXVT_CFONT
OPT_CRXVT_EFONT=$OPT_CRXVT_EFONT
OPT_FONT_ET15=$OPT_FONT_ET15
OPT_FONT_ET24K=$OPT_FONT_ET24K
OPT_FONT_ET24L=$OPT_FONT_ET24L
OPT_FONT_ET24S=$OPT_FONT_ET24S
OPT_FONT_ET24M=$OPT_FONT_ET24M
OPT_FONT_ET24R=$OPT_FONT_ET24R
OPT_FONT_ET24B=$OPT_FONT_ET24B
OPT_FONT_ETV8=$OPT_FONT_ETV8
OPT_FONT_ETV12=$OPT_FONT_ETV12
OPT_UTIL_CLIOBJ=$OPT_UTIL_CLIOBJ
OPT_UTIL_ET2BDF=$OPT_UTIL_ET2BDF
OPT_UTIL_CIN2TAB=$OPT_UTIL_CIN2TAB
OPT_UTIL_TSINTOOLS=$OPT_UTIL_TSINTOOLS
OPT_INPTAB_PINYIN=$OPT_INPTAB_PINYIN
OPT_INPTAB_SHUANPIN=$OPT_INPTAB_SHUANPIN
OPT_INPTAB_WUBI=$OPT_INPTAB_WUBI
OPT_INPTAB_ZHIRANMA=$OPT_INPTAB_ZHIRANMA

EOF