/*
FRACSUBR.C contains subroutines which belong primarily to CALCFRAC.C and
FRACTALS.C, i.e. which are non-fractal-specific fractal engine subroutines.
*/

#ifndef USE_VARARGS
#include <stdarg.h>
#else
#include <varargs.h>
#endif

#ifndef XFRACT
#include <sys/timeb.h>
#endif
#include <sys/types.h>
#include <time.h>
  /* see Fractint.c for a description of the "include"  hierarchy */
#include "port.h"
#include "prototyp.h"
#include "fractype.h"


/* routines in this module      */

static long   _fastcall fudgetolong(double d);
static double _fastcall fudgetodouble(long l);
static void   _fastcall adjust_to_limits(double);
static void   _fastcall smallest_add(double *);
static int    _fastcall ratio_bad(double,double);
static void   _fastcall plotdorbit(double,double,int);
static int    _fastcall combine_worklist(void);

static void   _fastcall adjust_to_limitsbf(double);
static void   _fastcall smallest_add_bf(bf_t);
       int    resume_len;               /* length of resume info */
static int    resume_offset;            /* offset in resume info gets */
       int    taborhelp;    /* kludge for sound and tab or help key press */

#define FUDGEFACTOR     29      /* fudge all values up by 2**this */
#define FUDGEFACTOR2    24      /* (or maybe this)                */

void set_grid_pointers()
{
   dx0 = MK_FP(extraseg,0);
   dy1 = (dx1 = (dy0 = dx0 + xdots) + ydots) + ydots;
   lx0 = (long far *) dx0;
   ly1 = (lx1 = (ly0 = lx0 + xdots) + ydots) + ydots;
   set_pixel_calc_functions();
}

void fill_dx_array(void)
{
   int i;
   if(use_grid)
   {
      dx0[0] = xxmin;              /* fill up the x, y grids */
      dy0[0] = yymax;
      dx1[0] = dy1[0] = 0;
      for (i = 1; i < xdots; i++ ) {
         dx0[i] = (double)(dx0[0] + i*delxx);
         dy1[i] = (double)(dy1[0] - i*delyy2);
      }
      for (i = 1; i < ydots; i++ ) {
         dy0[i] = (double)(dy0[0] - i*delyy);
         dx1[i] = (double)(dx1[0] + i*delxx2);
      }
   }
}
void fill_lx_array(void)
{
   int i;
   /* note that lx1 & ly1 values can overflow into sign bit; since     */
   /* they're used only to add to lx0/ly0, 2s comp straightens it out  */
   if(use_grid)
   {
      lx0[0] = xmin;               /* fill up the x, y grids */
      ly0[0] = ymax;
      lx1[0] = ly1[0] = 0;
      for (i = 1; i < xdots; i++ ) {
         lx0[i] = lx0[i-1] + delx;
         ly1[i] = ly1[i-1] - dely2;
      }
      for (i = 1; i < ydots; i++ ) {
         ly0[i] = ly0[i-1] - dely;
         lx1[i] = lx1[i-1] + delx2;
      }
   }
}

void fractal_floattobf(void)
{
   int i;
   init_bf_dec(getprecdbl(CURRENTREZ));
   floattobf(bfxmin,xxmin);
   floattobf(bfxmax,xxmax);
   floattobf(bfymin,yymin);
   floattobf(bfymax,yymax);
   floattobf(bfx3rd,xx3rd);
   floattobf(bfy3rd,yy3rd);

   for (i = 0; i < MAXPARAMS; i++)
      if(typehasparm(fractype,i,NULL))
         floattobf(bfparms[i],param[i]);
   calc_status = 0;
}


#ifdef _MSC_VER
#if _MSC_VER == 800
/* MSC8 doesn't correctly calculate the address of certain arrays here */
#pragma optimize( "", off )
#endif
#endif

int use_grid;

void calcfracinit(void) /* initialize a *pile* of stuff for fractal calculation */
{
   int tries = 0;
   int i, gotprec;
   long xytemp;
   double ftemp;
   coloriter=oldcoloriter = 0L;
   for(i=0;i<10;i++)
      rhombus_stack[i] = 0;
 
  /* set up grid array compactly leaving space at end */
  /* space req for grid is 2(xdots+ydots)*sizeof(long or double) */
  /* space available in extraseg is 65536 Bytes */
   xytemp = xdots + ydots;
   if( ((usr_floatflag == 0) && (xytemp * sizeof(long) > 32768)) ||
       ((usr_floatflag == 1) && (xytemp * sizeof(double) > 32768)) ||
         debugflag == 3800)
   {
      use_grid=0;
      floatflag = usr_floatflag = 1;
   }
   else
      use_grid=1;   

   set_grid_pointers();
 
   if(!(curfractalspecific->flags & BF_MATH))
   {
      int tofloat;
      if((tofloat=curfractalspecific->tofloat) == NOFRACTAL)
         bf_math = 0;
      else if(!(fractalspecific[tofloat].flags & BF_MATH))
         bf_math = 0;
      else if(bf_math)
      {
         curfractalspecific = &fractalspecific[tofloat];
         fractype = tofloat;
      }
   }

   /* switch back to double when zooming out if using arbitrary precision */
   if(bf_math)
   {
      gotprec=getprecbf(CURRENTREZ);
      if((gotprec <= DBL_DIG+1 && debugflag != 3200) || math_tol[1] >= 1.0)
      {
         bfcornerstofloat();
         bf_math = 0;
      }
      else
         init_bf_dec(gotprec);
   }
   else if((fractype==MANDEL || fractype==MANDELFP) && debugflag==3200)
   {
      fractype=MANDELFP;
      curfractalspecific = &fractalspecific[MANDELFP];
      fractal_floattobf();
      usr_floatflag = 1;
   }
   else if((fractype==JULIA || fractype==JULIAFP) && debugflag==3200)
   {
      fractype=JULIAFP;
      curfractalspecific = &fractalspecific[JULIAFP];
      fractal_floattobf();
      usr_floatflag = 1;
   }
   else if((fractype==LMANDELZPOWER || fractype==FPMANDELZPOWER) && debugflag==3200)
   {
      fractype=FPMANDELZPOWER;
      curfractalspecific = &fractalspecific[FPMANDELZPOWER];
      fractal_floattobf();
      usr_floatflag = 1;
   }
   else if((fractype==LJULIAZPOWER || fractype==FPJULIAZPOWER) && debugflag==3200)
   {
      fractype=FPJULIAZPOWER;
      curfractalspecific = &fractalspecific[FPJULIAZPOWER];
      fractal_floattobf();
      usr_floatflag = 1;
   }
   else if((fractype==DIVIDEBROT5) && debugflag==3200)
   {
      fractype=DIVIDEBROT5;
      curfractalspecific = &fractalspecific[DIVIDEBROT5];
      fractal_floattobf();
      usr_floatflag = 1;
   }
   else
      free_bf_vars();
   if(bf_math)
      floatflag=1;
   else
      floatflag = usr_floatflag;
   if (calc_status == 2) { /* on resume, ensure floatflag correct */
      if (curfractalspecific->isinteger)
         floatflag = 0;
      else
         floatflag = 1;
   }
   /* if floating pt only, set floatflag for TAB screen */
   if (!curfractalspecific->isinteger && curfractalspecific->tofloat == NOFRACTAL)
      floatflag = 1;
   if (usr_stdcalcmode == 's') {
      if (fractype == MANDEL || fractype == MANDELFP)
         floatflag = 1;
      else
         usr_stdcalcmode = '1';
   }

init_restart:

   /* the following variables may be forced to a different setting due to
      calc routine constraints;  usr_xxx is what the user last said is wanted,
      xxx is what we actually do in the current situation */
   stdcalcmode      = usr_stdcalcmode;
   periodicitycheck = usr_periodicitycheck;
   distest          = usr_distest;
   biomorph         = usr_biomorph;
   if(inside == ATANI && save_release >= 2004)
      periodicitycheck = 0;

   potflag = 0;
   if (potparam[0] != 0.0
     && colors >= 64
     && (curfractalspecific->calctype == StandardFractal
         || curfractalspecific->calctype == calcmand
         || curfractalspecific->calctype == calcmandfp)) {
      potflag = 1;
      distest = usr_distest = 0;    /* can't do distest too */
      }

   if (distest)
      floatflag = 1;  /* force floating point for dist est */

   if (floatflag) { /* ensure type matches floatflag */
      if (curfractalspecific->isinteger != 0
        && curfractalspecific->tofloat != NOFRACTAL)
         fractype = curfractalspecific->tofloat;
      }
   else {
      if (curfractalspecific->isinteger == 0
        && curfractalspecific->tofloat != NOFRACTAL)
         fractype = curfractalspecific->tofloat;
      }
   /* match Julibrot with integer mode of orbit */
   if(fractype == JULIBROTFP && fractalspecific[neworbittype].isinteger)
   {
      int i;
      if((i=fractalspecific[neworbittype].tofloat) != NOFRACTAL)
         neworbittype = i;
      else
         fractype = JULIBROT;
   }
   else if(fractype == JULIBROT && fractalspecific[neworbittype].isinteger==0)
   {
      int i;
      if((i=fractalspecific[neworbittype].tofloat) != NOFRACTAL)
         neworbittype = i;
      else
         fractype = JULIBROTFP;
   }

   curfractalspecific = &fractalspecific[fractype];

   integerfractal = curfractalspecific->isinteger;

/*   if (fractype == JULIBROT)
      rqlim = 4;
   else */ if (potflag && potparam[2] != 0.0)
      rqlim = potparam[2];
/* else if (decomp[0] > 0 && decomp[1] > 0)
      rqlim = (double)decomp[1]; */
   else if (bailout) /* user input bailout */
      rqlim = bailout;
   else if (biomorph != -1) /* biomorph benefits from larger bailout */
      rqlim = 100;
   else
      rqlim = curfractalspecific->orbit_bailout;
   if (integerfractal) /* the bailout limit mustn't be too high here */
      if (rqlim > 127.0) rqlim = 127.0;

   if ((curfractalspecific->flags&NOROTATE) != 0) {
      /* ensure min<max and unrotated rectangle */
      if (xxmin > xxmax) { ftemp = xxmax; xxmax = xxmin; xxmin = ftemp; }
      if (yymin > yymax) { ftemp = yymax; yymax = yymin; yymin = ftemp; }
      xx3rd = xxmin; yy3rd = yymin;
      }

   /* set up bitshift for integer math */
   bitshift = FUDGEFACTOR2; /* by default, the smaller shift */
   if (integerfractal > 1)  /* use specific override from table */
      bitshift = integerfractal;
   if (integerfractal == 0) { /* float? */
      if ((i = curfractalspecific->tofloat) != NOFRACTAL) /* -> int? */
      {
         if (fractalspecific[i].isinteger > 1) /* specific shift? */
            bitshift = fractalspecific[i].isinteger;
      }
      else
         bitshift = 16;  /* to allow larger corners */
   }
/* We want this code if we're using the assembler calcmand */
   if (fractype == MANDEL || fractype == JULIA) { /* adust shift bits if.. */
      if (potflag == 0                            /* not using potential */
        && (param[0] > -2.0 && param[0] < 2.0)  /* parameters not too large */
        && (param[1] > -2.0 && param[1] < 2.0)
        && !invert                                /* and not inverting */
        && biomorph == -1                         /* and not biomorphing */
        && rqlim <= 4.0                           /* and bailout not too high */
        && (outside > -2 || outside < -6)         /* and no funny outside stuff */
        && debugflag != 1234                      /* and not debugging */
        && closeprox <= 2.0                       /* and closeprox not too large */
        && bailoutest == Mod)                     /* and bailout test = mod */
         bitshift = FUDGEFACTOR;                  /* use the larger bitshift */
      }

   fudge = 1L << bitshift;

   l_at_rad = fudge/32768L;
   f_at_rad = 1.0/32768L;

   /* now setup arrays of real coordinates corresponding to each pixel */
   if(bf_math)
      adjust_to_limitsbf(1.0); /* make sure all corners in valid range */
   else
   {
      adjust_to_limits(1.0); /* make sure all corners in valid range */
      delxx  = (LDBL)(xxmax - xx3rd) / (LDBL)dxsize; /* calculate stepsizes */
      delyy  = (LDBL)(yymax - yy3rd) / (LDBL)dysize;
      delxx2 = (LDBL)(xx3rd - xxmin) / (LDBL)dysize;
      delyy2 = (LDBL)(yy3rd - yymin) / (LDBL)dxsize;
      fill_dx_array();
   }

   if(fractype != CELLULAR && fractype != ANT)  /* fudgetolong fails w >10 digits in double */
   {
      creal = fudgetolong(param[0]); /* integer equivs for it all */
      cimag = fudgetolong(param[1]);
      xmin  = fudgetolong(xxmin);
      xmax  = fudgetolong(xxmax);
      x3rd  = fudgetolong(xx3rd);
      ymin  = fudgetolong(yymin);
      ymax  = fudgetolong(yymax);
      y3rd  = fudgetolong(yy3rd);
      delx  = fudgetolong((double)delxx);
      dely  = fudgetolong((double)delyy);
      delx2 = fudgetolong((double)delxx2);
      dely2 = fudgetolong((double)delyy2);
   }

   /* skip this if plasma to avoid 3d problems */
   /* skip if bf_math to avoid extraseg conflict with dx0 arrays */
   /* skip if ifs, ifs3d, or lsystem to avoid crash when mathtolerance */
   /* is set.  These types don't auto switch between float and integer math */
   if (fractype != PLASMA && bf_math == 0
       && fractype != IFS && fractype != IFS3D && fractype != LSYSTEM)
   {
      if (integerfractal && !invert && use_grid)
      {
         if (   (delx  == 0 && delxx  != 0.0)
             || (delx2 == 0 && delxx2 != 0.0)
             || (dely  == 0 && delyy  != 0.0)
             || (dely2 == 0 && delyy2 != 0.0) )
            goto expand_retry;

         fill_lx_array();   /* fill up the x,y grids */
         /* past max res?  check corners within 10% of expected */
         if (   ratio_bad((double)lx0[xdots-1]-xmin,(double)xmax-x3rd)
             || ratio_bad((double)ly0[ydots-1]-ymax,(double)y3rd-ymax)
             || ratio_bad((double)lx1[(ydots>>1)-1],((double)x3rd-xmin)/2)
             || ratio_bad((double)ly1[(xdots>>1)-1],((double)ymin-y3rd)/2) )
         {
expand_retry:
            if (integerfractal          /* integer fractal type? */
               && curfractalspecific->tofloat != NOFRACTAL)
               floatflag = 1;           /* switch to floating pt */
            else
               adjust_to_limits(2.0);   /* double the size */
            if (calc_status == 2)       /* due to restore of an old file? */
               calc_status = 0;         /*   whatever, it isn't resumable */
            goto init_restart;
         } /* end if ratio bad */

         /* re-set corners to match reality */
         xmax = lx0[xdots-1] + lx1[ydots-1];
         ymin = ly0[ydots-1] + ly1[xdots-1];
         x3rd = xmin + lx1[ydots-1];
         y3rd = ly0[ydots-1];
         xxmin = fudgetodouble(xmin);
         xxmax = fudgetodouble(xmax);
         xx3rd = fudgetodouble(x3rd);
         yymin = fudgetodouble(ymin);
         yymax = fudgetodouble(ymax);
         yy3rd = fudgetodouble(y3rd);
      } /* end if (integerfractal && !invert && use_grid) */
      else
      {
         double dx0,dy0,dx1,dy1;
         /* set up dx0 and dy0 analogs of lx0 and ly0 */
         /* put fractal parameters in doubles */
         dx0 = xxmin;                /* fill up the x, y grids */
         dy0 = yymax;
         dx1 = dy1 = 0;
         /* this way of defining the dx and dy arrays is not the most
            accurate, but it is kept because it is used to determine
            the limit of resolution */
         for (i = 1; i < xdots; i++ ) {
            dx0 = (double)(dx0 + (double)delxx);
            dy1 = (double)(dy1 - (double)delyy2);
            }
         for (i = 1; i < ydots; i++ ) {
            dy0 = (double)(dy0 - (double)delyy);
            dx1 = (double)(dx1 + (double)delxx2);
            }
         if(bf_math == 0) /* redundant test, leave for now */
         {
            double testx_try, testx_exact;
            double testy_try, testy_exact;
            /* Following is the old logic for detecting failure of double
               precision. It has two advantages: it is independent of the
               representation of numbers, and it is sensitive to resolution
               (allows depper zooms at lower resolution. However it fails
               for rotations of exactly 90 degrees, so we added a safety net
               by using the magnification.  */
            if(++tries < 2) /* for safety */
            {
            static FCODE err[] = {"precision-detection error"};
            if(tries > 1) stopmsg(0, err);
            /* Previously there were four tests of distortions in the
               zoom box used to detect precision limitations. In some
               cases of rotated/skewed zoom boxs, this causes the algorithm
               to bail out to arbitrary precision too soon. The logic
               now only tests the larger of the two deltas in an attempt
               to repair this bug. This should never make the transition
               to arbitrary precision sooner, but always later.*/
            if(fabs(xxmax-xx3rd) > fabs(xx3rd-xxmin))
            {
               testx_exact  = xxmax-xx3rd;
               testx_try    = dx0-xxmin;
            }
            else
            {
               testx_exact  = xx3rd-xxmin;
               testx_try    = dx1;
            }
            if(fabs(yy3rd-yymax) > fabs(yymin-yy3rd))
            {
               testy_exact = yy3rd-yymax; 
               testy_try   = dy0-yymax;
            }
            else
            {
               testy_exact = yymin-yy3rd; 
               testy_try   = dy1;
            }
            if(ratio_bad(testx_try,testx_exact) || 
               ratio_bad(testy_try,testy_exact))
            {
               if(curfractalspecific->flags & BF_MATH)
               {
                  fractal_floattobf();
                  goto init_restart;
               }
               goto expand_retry;
            } /* end if ratio_bad etc. */
            } /* end if tries < 2 */
         } /* end if bf_math == 0 */

         /* if long double available, this is more accurate */
         fill_dx_array();       /* fill up the x, y grids */

         /* re-set corners to match reality */
         xxmax = (double)(xxmin + (xdots-1)*delxx + (ydots-1)*delxx2);
         yymin = (double)(yymax - (ydots-1)*delyy - (xdots-1)*delyy2);
         xx3rd = (double)(xxmin + (ydots-1)*delxx2);
         yy3rd = (double)(yymax - (ydots-1)*delyy);

      } /* end else */
   } /* end if not plasma */

   /* for periodicity close-enough, and for unity: */
   /*     min(max(delx,delx2),max(dely,dely2)      */
   ddelmin = fabs((double)delxx);
   if (fabs((double)delxx2) > ddelmin)
      ddelmin = fabs((double)delxx2);
   if (fabs((double)delyy) > fabs((double)delyy2))
   {
      if (fabs((double)delyy) < ddelmin)
         ddelmin = fabs((double)delyy);
   }
   else if (fabs((double)delyy2) < ddelmin)
      ddelmin = fabs((double)delyy2);
   delmin = fudgetolong(ddelmin);

   /* calculate factors which plot real values to screen co-ords */
   /* calcfrac.c plot_orbit routines have comments about this    */
   ftemp = (double)((0.0-delyy2) * delxx2 * dxsize * dysize
           - (xxmax-xx3rd) * (yy3rd-yymax));
   if(ftemp != 0)
   {
      plotmx1 = (double)(delxx2 * dxsize * dysize / ftemp);
      plotmx2 = (yy3rd-yymax) * dxsize / ftemp;
      plotmy1 = (double)((0.0-delyy2) * dxsize * dysize / ftemp);
      plotmy2 = (xxmax-xx3rd) * dysize / ftemp;
   }
   if(bf_math == 0)
      free_bf_vars();
   else
   {
      /* zap all of extraseg except high area to flush out bugs */
      /* in production version this code can be deleted */
      char far *extra;
      extra = (char far *)MK_FP(extraseg,0);
      far_memset(extra,0,(unsigned int)(0x10000l-(bflength+2)*22U));
   }
}

#ifdef _MSC_VER
#if _MSC_VER == 800
#pragma optimize( "", on ) /* restore optimization options */
#endif
#endif

static long _fastcall fudgetolong(double d)
{
   if ((d *= fudge) > 0) d += 0.5;
   else                  d -= 0.5;
   return (long)d;
}

static double _fastcall fudgetodouble(long l)
{
   char buf[30];
   double d;
   sprintf(buf,"%.9g",(double)l / fudge);
#ifndef XFRACT
   sscanf(buf,"%lg",&d);
#else
   sscanf(buf,"%lf",&d);
#endif
   return d;
}

void adjust_cornerbf(void)
{
   /* make edges very near vert/horiz exact, to ditch rounding errs and */
   /* to avoid problems when delta per axis makes too large a ratio     */
   double ftemp;
   double Xmagfactor, Rotation, Skew;
   LDBL Magnification;

   bf_t bftemp, bftemp2;
   bf_t btmp1;
   int saved; saved = save_stack();
   bftemp  = alloc_stack(rbflength+2);
   bftemp2 = alloc_stack(rbflength+2);
   btmp1  =  alloc_stack(rbflength+2);

   /* While we're at it, let's adjust the Xmagfactor as well */
   /* use bftemp, bftemp2 as bfXctr, bfYctr */
   cvtcentermagbf(bftemp, bftemp2, &Magnification, &Xmagfactor, &Rotation, &Skew);
   ftemp = fabs(Xmagfactor);
   if (ftemp != 1 && ftemp >= (1-aspectdrift) && ftemp <= (1+aspectdrift))
      {
      Xmagfactor = sign(Xmagfactor);
      cvtcornersbf(bftemp, bftemp2, Magnification, Xmagfactor, Rotation, Skew);
      }

   /* ftemp=fabs(xx3rd-xxmin); */
   abs_a_bf(sub_bf(bftemp,bfx3rd,bfxmin));

   /* ftemp2=fabs(xxmax-xx3rd);*/
   abs_a_bf(sub_bf(bftemp2,bfxmax,bfx3rd));

   /* if( (ftemp=fabs(xx3rd-xxmin)) < (ftemp2=fabs(xxmax-xx3rd)) ) */
   if(cmp_bf(bftemp,bftemp2) < 0)
   {
      /* if (ftemp*10000 < ftemp2 && yy3rd != yymax) */
      if (cmp_bf(mult_bf_int(btmp1,bftemp,10000),bftemp2) < 0
         && cmp_bf(bfy3rd,bfymax) != 0 )
         /* xx3rd = xxmin; */
         copy_bf(bfx3rd, bfxmin);
   }

   /* else if (ftemp2*10000 < ftemp && yy3rd != yymin) */
   if (cmp_bf(mult_bf_int(btmp1,bftemp2,10000),bftemp) < 0
                   && cmp_bf(bfy3rd,bfymin) != 0 )
      /* xx3rd = xxmax; */
      copy_bf(bfx3rd, bfxmax);

   /* ftemp=fabs(yy3rd-yymin); */
   abs_a_bf(sub_bf(bftemp,bfy3rd,bfymin));

   /* ftemp2=fabs(yymax-yy3rd); */
   abs_a_bf(sub_bf(bftemp2,bfymax,bfy3rd));

   /* if( (ftemp=fabs(yy3rd-yymin)) < (ftemp2=fabs(yymax-yy3rd)) ) */
   if(cmp_bf(bftemp,bftemp2) < 0)
   {
      /* if (ftemp*10000 < ftemp2 && xx3rd != xxmax) */
      if (cmp_bf(mult_bf_int(btmp1,bftemp,10000),bftemp2) < 0
                 && cmp_bf(bfx3rd,bfxmax) != 0 )
         /* yy3rd = yymin; */
         copy_bf(bfy3rd, bfymin);
   }

   /* else if (ftemp2*10000 < ftemp && xx3rd != xxmin) */
     if (cmp_bf(mult_bf_int(btmp1,bftemp2,10000),bftemp) < 0
                      && cmp_bf(bfx3rd,bfxmin) != 0 )
      /* yy3rd = yymax; */
      copy_bf(bfy3rd, bfymax);


   restore_stack(saved);
}

void adjust_corner(void)
{
   /* make edges very near vert/horiz exact, to ditch rounding errs and */
   /* to avoid problems when delta per axis makes too large a ratio     */
   double ftemp,ftemp2;
   double Xctr, Yctr, Xmagfactor, Rotation, Skew;
   LDBL Magnification;

   if(!integerfractal)
      {
      /* While we're at it, let's adjust the Xmagfactor as well */
      cvtcentermag(&Xctr, &Yctr, &Magnification, &Xmagfactor, &Rotation, &Skew);
      ftemp = fabs(Xmagfactor);
      if (ftemp != 1 && ftemp >= (1-aspectdrift) && ftemp <= (1+aspectdrift))
         {
         Xmagfactor = sign(Xmagfactor);
         cvtcorners(Xctr, Yctr, Magnification, Xmagfactor, Rotation, Skew);
         }
      }

   if( (ftemp=fabs(xx3rd-xxmin)) < (ftemp2=fabs(xxmax-xx3rd)) ) {
      if (ftemp*10000 < ftemp2 && yy3rd != yymax)
         xx3rd = xxmin;
      }

   if (ftemp2*10000 < ftemp && yy3rd != yymin)
      xx3rd = xxmax;

   if( (ftemp=fabs(yy3rd-yymin)) < (ftemp2=fabs(yymax-yy3rd)) ) {
      if (ftemp*10000 < ftemp2 && xx3rd != xxmax)
         yy3rd = yymin;
      }

   if (ftemp2*10000 < ftemp && xx3rd != xxmin)
      yy3rd = yymax;

}

static void _fastcall adjust_to_limitsbf(double expand)
{
   LDBL limit;
   bf_t bcornerx[4],bcornery[4];
   bf_t blowx,bhighx,blowy,bhighy,blimit,bftemp;
   bf_t bcenterx,bcentery,badjx,badjy,btmp1,btmp2;
   bf_t bexpand;
   int i;
   int saved; saved = save_stack();
   bcornerx[0] = alloc_stack(rbflength+2);
   bcornerx[1] = alloc_stack(rbflength+2);
   bcornerx[2] = alloc_stack(rbflength+2);
   bcornerx[3] = alloc_stack(rbflength+2);
   bcornery[0] = alloc_stack(rbflength+2);
   bcornery[1] = alloc_stack(rbflength+2);
   bcornery[2] = alloc_stack(rbflength+2);
   bcornery[3] = alloc_stack(rbflength+2);
   blowx       = alloc_stack(rbflength+2);
   bhighx      = alloc_stack(rbflength+2);
   blowy       = alloc_stack(rbflength+2);
   bhighy      = alloc_stack(rbflength+2);
   blimit      = alloc_stack(rbflength+2);
   bftemp      = alloc_stack(rbflength+2);
   bcenterx    = alloc_stack(rbflength+2);
   bcentery    = alloc_stack(rbflength+2);
   badjx       = alloc_stack(rbflength+2);
   badjy       = alloc_stack(rbflength+2);
   btmp1       = alloc_stack(rbflength+2);
   btmp2       = alloc_stack(rbflength+2);
   bexpand     = alloc_stack(rbflength+2);

   limit = 32767.99;

/*   if (bitshift >= 24) limit = 31.99;
   if (bitshift >= 29) limit = 3.99; */
   floattobf(blimit,limit);
   floattobf(bexpand,expand);

   add_bf(bcenterx,bfxmin,bfxmax);
   half_a_bf(bcenterx);

   /* centery = (yymin+yymax)/2; */
   add_bf(bcentery,bfymin,bfymax);
   half_a_bf(bcentery);

   /* if (xxmin == centerx) { */
   if (cmp_bf(bfxmin,bcenterx)==0) { /* ohoh, infinitely thin, fix it */
      smallest_add_bf(bfxmax);
      /* bfxmin -= bfxmax-centerx; */
      sub_a_bf(bfxmin,sub_bf(btmp1,bfxmax,bcenterx));
      }

   /* if (bfymin == centery) */
   if (cmp_bf(bfymin,bcentery)==0) {
      smallest_add_bf(bfymax);
      /* bfymin -= bfymax-centery; */
      sub_a_bf(bfymin,sub_bf(btmp1,bfymax,bcentery));
      }

   /* if (bfx3rd == centerx) */
   if (cmp_bf(bfx3rd,bcenterx)==0)
      smallest_add_bf(bfx3rd);

   /* if (bfy3rd == centery) */
   if (cmp_bf(bfy3rd,bcentery)==0)
      smallest_add_bf(bfy3rd);

   /* setup array for easier manipulation */
   /* cornerx[0] = xxmin; */
   copy_bf(bcornerx[0],bfxmin);

   /* cornerx[1] = xxmax; */
   copy_bf(bcornerx[1],bfxmax);

   /* cornerx[2] = xx3rd; */
   copy_bf(bcornerx[2],bfx3rd);

   /* cornerx[3] = xxmin+(xxmax-xx3rd); */
   sub_bf(bcornerx[3],bfxmax,bfx3rd);
   add_a_bf(bcornerx[3],bfxmin);

   /* cornery[0] = yymax; */
   copy_bf(bcornery[0],bfymax);

   /* cornery[1] = yymin; */
   copy_bf(bcornery[1],bfymin);

   /* cornery[2] = yy3rd; */
   copy_bf(bcornery[2],bfy3rd);

   /* cornery[3] = yymin+(yymax-yy3rd); */
   sub_bf(bcornery[3],bfymax,bfy3rd);
   add_a_bf(bcornery[3],bfymin);

   /* if caller wants image size adjusted, do that first */
   if (expand != 1.0)
   {
      for (i=0; i<4; ++i) {
         /* cornerx[i] = centerx + (cornerx[i]-centerx)*expand; */
         sub_bf(btmp1,bcornerx[i],bcenterx);
         mult_bf(bcornerx[i],btmp1,bexpand);
         add_a_bf(bcornerx[i],bcenterx);

         /* cornery[i] = centery + (cornery[i]-centery)*expand; */
         sub_bf(btmp1,bcornery[i],bcentery);
         mult_bf(bcornery[i],btmp1,bexpand);
         add_a_bf(bcornery[i],bcentery);
      }
   }

   /* get min/max x/y values */
   /* lowx = highx = cornerx[0]; */
   copy_bf(blowx,bcornerx[0]); copy_bf(bhighx,bcornerx[0]);

   /* lowy = highy = cornery[0]; */
   copy_bf(blowy,bcornery[0]); copy_bf(bhighy,bcornery[0]);

   for (i=1; i<4; ++i) {
      /* if (cornerx[i] < lowx)               lowx  = cornerx[i]; */
      if (cmp_bf(bcornerx[i],blowx) < 0)   copy_bf(blowx,bcornerx[i]);

      /* if (cornerx[i] > highx)              highx = cornerx[i]; */
      if (cmp_bf(bcornerx[i],bhighx) > 0)  copy_bf(bhighx,bcornerx[i]);

      /* if (cornery[i] < lowy)               lowy  = cornery[i]; */
      if (cmp_bf(bcornery[i],blowy) < 0)   copy_bf(blowy,bcornery[i]);

      /* if (cornery[i] > highy)              highy = cornery[i]; */
      if (cmp_bf(bcornery[i],bhighy) > 0)  copy_bf(bhighy,bcornery[i]);
      }

   /* if image is too large, downsize it maintaining center */
   /* ftemp = highx-lowx; */
   sub_bf(bftemp,bhighx,blowx);

   /* if (highy-lowy > ftemp) ftemp = highy-lowy; */
   if (cmp_bf(sub_bf(btmp1,bhighy,blowy),bftemp) > 0) copy_bf(bftemp,btmp1);

   /* if image is too large, downsize it maintaining center */

   floattobf(btmp1,limit*2.0);
   copy_bf(btmp2,bftemp);
   div_bf(bftemp,btmp1,btmp2);
   floattobf(btmp1,1.0);
   if (cmp_bf(bftemp,btmp1) < 0)
      for (i=0; i<4; ++i) {
         /* cornerx[i] = centerx + (cornerx[i]-centerx)*ftemp; */
         sub_bf(btmp1,bcornerx[i],bcenterx);
         mult_bf(bcornerx[i],btmp1,bftemp);
         add_a_bf(bcornerx[i],bcenterx);

         /* cornery[i] = centery + (cornery[i]-centery)*ftemp; */
         sub_bf(btmp1,bcornery[i],bcentery);
         mult_bf(bcornery[i],btmp1,bftemp);
         add_a_bf(bcornery[i],bcentery);
         }

   /* if any corner has x or y past limit, move the image */
   /* adjx = adjy = 0; */
   clear_bf(badjx); clear_bf(badjy);

   for (i=0; i<4; ++i) {
      /* if (cornerx[i] > limit && (ftemp = cornerx[i] - limit) > adjx)
         adjx = ftemp; */
      if (cmp_bf(bcornerx[i],blimit) > 0 &&
          cmp_bf(sub_bf(bftemp,bcornerx[i],blimit),badjx) > 0)
         copy_bf(badjx,bftemp);

      /* if (cornerx[i] < 0.0-limit && (ftemp = cornerx[i] + limit) < adjx)
         adjx = ftemp; */
      if (cmp_bf(bcornerx[i],neg_bf(btmp1,blimit)) < 0 &&
          cmp_bf(add_bf(bftemp,bcornerx[i],blimit),badjx) < 0)
         copy_bf(badjx,bftemp);

      /* if (cornery[i] > limit  && (ftemp = cornery[i] - limit) > adjy)
         adjy = ftemp; */
      if (cmp_bf(bcornery[i],blimit) > 0 &&
          cmp_bf(sub_bf(bftemp,bcornery[i],blimit),badjy) > 0)
         copy_bf(badjy,bftemp);

      /* if (cornery[i] < 0.0-limit && (ftemp = cornery[i] + limit) < adjy)
         adjy = ftemp; */
      if (cmp_bf(bcornery[i],neg_bf(btmp1,blimit)) < 0 &&
          cmp_bf(add_bf(bftemp,bcornery[i],blimit),badjy) < 0)
         copy_bf(badjy,bftemp);
      }

   /* if (calc_status == 2 && (adjx != 0 || adjy != 0) && (zwidth == 1.0))
      calc_status = 0; */
   if (calc_status == 2 && (is_bf_not_zero(badjx)|| is_bf_not_zero(badjy)) && (zwidth == 1.0))
      calc_status = 0;

   /* xxmin = cornerx[0] - adjx; */
   sub_bf(bfxmin,bcornerx[0],badjx);
   /* xxmax = cornerx[1] - adjx; */
   sub_bf(bfxmax,bcornerx[1],badjx);
   /* xx3rd = cornerx[2] - adjx; */
   sub_bf(bfx3rd,bcornerx[2],badjx);
   /* yymax = cornery[0] - adjy; */
   sub_bf(bfymax,bcornery[0],badjy);
   /* yymin = cornery[1] - adjy; */
   sub_bf(bfymin,bcornery[1],badjy);
   /* yy3rd = cornery[2] - adjy; */
   sub_bf(bfy3rd,bcornery[2],badjy);

   adjust_cornerbf(); /* make 3rd corner exact if very near other co-ords */
   restore_stack(saved);
}

static void _fastcall adjust_to_limits(double expand)
{
   double cornerx[4],cornery[4];
   double lowx,highx,lowy,highy,limit,ftemp;
   double centerx,centery,adjx,adjy;
   int i;

   limit = 32767.99;

   if (integerfractal) {
      if (save_release > 1940) /* let user reproduce old GIF's and PAR's */
         limit = 1023.99;
      if (bitshift >= 24) limit = 31.99;
      if (bitshift >= 29) limit = 3.99;
   }

   centerx = (xxmin+xxmax)/2;
   centery = (yymin+yymax)/2;

   if (xxmin == centerx) { /* ohoh, infinitely thin, fix it */
      smallest_add(&xxmax);
      xxmin -= xxmax-centerx;
      }

   if (yymin == centery) {
      smallest_add(&yymax);
      yymin -= yymax-centery;
      }

   if (xx3rd == centerx)
      smallest_add(&xx3rd);

   if (yy3rd == centery)
      smallest_add(&yy3rd);

   /* setup array for easier manipulation */
   cornerx[0] = xxmin;
   cornerx[1] = xxmax;
   cornerx[2] = xx3rd;
   cornerx[3] = xxmin+(xxmax-xx3rd);

   cornery[0] = yymax;
   cornery[1] = yymin;
   cornery[2] = yy3rd;
   cornery[3] = yymin+(yymax-yy3rd);

   /* if caller wants image size adjusted, do that first */
   if (expand != 1.0)
   {
      for (i=0; i<4; ++i) {
         cornerx[i] = centerx + (cornerx[i]-centerx)*expand;
         cornery[i] = centery + (cornery[i]-centery)*expand;
      }
   }
   /* get min/max x/y values */
   lowx = highx = cornerx[0];
   lowy = highy = cornery[0];

   for (i=1; i<4; ++i) {
      if (cornerx[i] < lowx)               lowx  = cornerx[i];
      if (cornerx[i] > highx)              highx = cornerx[i];
      if (cornery[i] < lowy)               lowy  = cornery[i];
      if (cornery[i] > highy)              highy = cornery[i];
      }

   /* if image is too large, downsize it maintaining center */
   ftemp = highx-lowx;

   if (highy-lowy > ftemp) ftemp = highy-lowy;

   /* if image is too large, downsize it maintaining center */
   if ((ftemp = limit*2/ftemp) < 1.0) {
      for (i=0; i<4; ++i) {
         cornerx[i] = centerx + (cornerx[i]-centerx)*ftemp;
         cornery[i] = centery + (cornery[i]-centery)*ftemp;
         }
   }

   /* if any corner has x or y past limit, move the image */
   adjx = adjy = 0;

   for (i=0; i<4; ++i) {
      if (cornerx[i] > limit && (ftemp = cornerx[i] - limit) > adjx)
         adjx = ftemp;
      if (cornerx[i] < 0.0-limit && (ftemp = cornerx[i] + limit) < adjx)
         adjx = ftemp;
      if (cornery[i] > limit     && (ftemp = cornery[i] - limit) > adjy)
         adjy = ftemp;
      if (cornery[i] < 0.0-limit && (ftemp = cornery[i] + limit) < adjy)
         adjy = ftemp;
      }
   if (calc_status == 2 && (adjx != 0 || adjy != 0) && (zwidth == 1.0))
      calc_status = 0;
   xxmin = cornerx[0] - adjx;
   xxmax = cornerx[1] - adjx;
   xx3rd = cornerx[2] - adjx;
   yymax = cornery[0] - adjy;
   yymin = cornery[1] - adjy;
   yy3rd = cornery[2] - adjy;

   adjust_corner(); /* make 3rd corner exact if very near other co-ords */
}

static void _fastcall smallest_add(double *num)
{
   *num += *num * 5.0e-16;
}

static void _fastcall smallest_add_bf(bf_t num)
{
   bf_t btmp1;
   int saved; saved = save_stack();
   btmp1 = alloc_stack(bflength+2);
   mult_bf(btmp1,floattobf(btmp1, 5.0e-16),num);
   add_a_bf(num,btmp1);
   restore_stack(saved);
}

static int _fastcall ratio_bad(double actual, double desired)
{  
   double ftemp, tol;
   if(integerfractal)
      tol = math_tol[0];
   else
      tol = math_tol[1];
   if(tol <= 0.0)
      return(1);
   else if(tol >= 1.0)
      return(0);         
   ftemp = 0;
   if (desired != 0 && debugflag != 3400) {
      ftemp = actual / desired;
         if (ftemp < (1.0-tol) || ftemp > (1.0+tol))
            return(1);
   }
   return(0);
}


/* Save/resume stuff:

   Engines which aren't resumable can simply ignore all this.

   Before calling the (per_image,calctype) routines (engine), calcfract sets:
      "resuming" to 0 if new image, nonzero if resuming a partially done image
      "calc_status" to 1
   If an engine is interrupted and wants to be able to resume it must:
      store whatever status info it needs to be able to resume later
      set calc_status to 2 and return
   If subsequently called with resuming!=0, the engine must restore status
   info and continue from where it left off.

   Since the info required for resume can get rather large for some types,
   it is not stored directly in save_info.  Instead, memory is dynamically
   allocated as required, and stored in .fra files as a separate block.
   To save info for later resume, an engine routine can use:
      alloc_resume(maxsize,version)
         Maxsize must be >= max bytes subsequently saved + 2; over-allocation
         is harmless except for possibility of insufficient mem available;
         undersize is not checked and probably causes serious misbehaviour.
         Version is an arbitrary number so that subsequent revisions of the
         engine can be made backward compatible.
         Alloc_resume sets calc_status to 2 (resumable) if it succeeds; to 3
         if it cannot allocate memory (and issues warning to user).
      put_resume({bytes,&argument,} ... 0)
         Can be called as often as required to store the info.
         Arguments must not be far addresses.
         Is not protected against calls which use more space than allocated.
   To reload info when resuming, use:
      start_resume()
         initializes and returns version number
      get_resume({bytes,&argument,} ... 0)
         inverse of store_resume
      end_resume()
         optional, frees the memory area sooner than would happen otherwise

   Example, save info:
      alloc_resume(sizeof(parmarray)+100,2);
      put_resume(sizeof(row),&row, sizeof(col),&col,
                 sizeof(parmarray),parmarray, 0);
    restore info:
      vsn = start_resume();
      get_resume(sizeof(row),&row, sizeof(col),&col, 0);
      if (vsn >= 2)
         get_resume(sizeof(parmarray),parmarray,0);
      end_resume();

   Engines which allocate a large far memory chunk of their own might
   directly set resume_info, resume_len, calc_status to avoid doubling
   transient memory needs by using these routines.

   StandardFractal, calcmand, solidguess, and bound_trace_main are a related
   set of engines for escape-time fractals.  They use a common worklist
   structure for save/resume.  Fractals using these must specify calcmand
   or StandardFractal as the engine in fractalspecificinfo.
   Other engines don't get btm nor ssg, don't get off-axis symmetry nor
   panning (the worklist stuff), and are on their own for save/resume.

   */

#ifndef USE_VARARGS
int put_resume(int len, ...)
#else
int put_resume(va_alist)
va_dcl
#endif
{
   va_list arg_marker;  /* variable arg list */
   BYTE *source_ptr;
#ifdef USE_VARARGS
   int len;
#endif

   if (resume_info == 0)
      return(-1);
#ifndef USE_VARARGS
   va_start(arg_marker,len);
#else
   va_start(arg_marker);
   len = va_arg(arg_marker,int);
#endif
   while (len)
   {
      source_ptr = (BYTE *)va_arg(arg_marker,char *);
/*      far_memcpy(resume_info+resume_len,source_ptr,len); */
      MoveToMemory(source_ptr,(U16)1,(long)len,resume_len,resume_info);
      resume_len += len;
      len = va_arg(arg_marker,int);
   }
   va_end(arg_marker);
   return(0);
}

int alloc_resume(int alloclen, int version)
{ /* WARNING! if alloclen > 4096B, problems may occur with GIF save/restore */
   if (resume_info != 0) /* free the prior area if there is one */
      MemoryRelease(resume_info);
   if ((resume_info = MemoryAlloc((U16)sizeof(alloclen), (long)alloclen, FARMEM)) == 0)
   {
      static FCODE msg[] = {"\
Warning - insufficient free memory to save status.\n\
You will not be able to resume calculating this image."};
      stopmsg(0,msg);
      calc_status = 3;
      return(-1);
   }
   resume_len = 0;
   put_resume(sizeof(version),&version,0);
   calc_status = 2;
   return(0);
}

#ifndef USE_VARARGS
int get_resume(int len, ...)
#else
int get_resume(va_alist)
va_dcl
#endif
{
   va_list arg_marker;  /* variable arg list */
   BYTE *dest_ptr;
#ifdef USE_VARARGS
   int len;
#endif

   if (resume_info == 0)
      return(-1);
#ifndef USE_VARARGS
   va_start(arg_marker,len);
#else
   va_start(arg_marker);
   len = va_arg(arg_marker,int);
#endif
   while (len)
   {
      dest_ptr = (BYTE *)va_arg(arg_marker,char *);
/*      far_memcpy(dest_ptr,resume_info+resume_offset,len); */
      MoveFromMemory(dest_ptr,(U16)1,(long)len,resume_offset,resume_info);
      resume_offset += len;
      len = va_arg(arg_marker,int);
   }
   va_end(arg_marker);
   return(0);
}

int start_resume(void)
{
   int version;
   if (resume_info == 0)
      return(-1);
   resume_offset = 0;
   get_resume(sizeof(version),&version,0);
   return(version);
}

void end_resume(void)
{
   if (resume_info != 0) /* free the prior area if there is one */
   {
      MemoryRelease(resume_info);
      resume_info = 0;
   }
}


/* Showing orbit requires converting real co-ords to screen co-ords.
   Define:
       Xs == xxmax-xx3rd               Ys == yy3rd-yymax
       W  == xdots-1                   D  == ydots-1
   We know that:
       realx == lx0[col] + lx1[row]
       realy == ly0[row] + ly1[col]
       lx0[col] == (col/width) * Xs + xxmin
       lx1[row] == row * delxx
       ly0[row] == (row/D) * Ys + yymax
       ly1[col] == col * (0-delyy)
  so:
       realx == (col/W) * Xs + xxmin + row * delxx
       realy == (row/D) * Ys + yymax + col * (0-delyy)
  and therefore:
       row == (realx-xxmin - (col/W)*Xs) / Xv    (1)
       col == (realy-yymax - (row/D)*Ys) / Yv    (2)
  substitute (2) into (1) and solve for row:
       row == ((realx-xxmin)*(0-delyy2)*W*D - (realy-yymax)*Xs*D)
                      / ((0-delyy2)*W*delxx2*D-Ys*Xs)
  */

/* sleep N * a tenth of a millisecond */

void sleepms_old(long ms)
{
    static long scalems = 0L;
    int savehelpmode,savetabmode;
    struct timebx t1,t2;
#define SLEEPINIT 250 /* milliseconds for calibration */
    savetabmode  = tabmode;
    savehelpmode = helpmode;
    tabmode  = 0;
    helpmode = -1;
    if(scalems==0L) /* calibrate */
    {
        /* selects a value of scalems that makes the units
           10000 per sec independent of CPU speed */
        int i,elapsed;
        scalems = 1L;
        if(keypressed()) /* check at start, hope to get start of timeslice */
           goto sleepexit;
        /* calibrate, assume slow computer first */
        showtempmsg("Calibrating timer");
        do
        {
           scalems *= 2;
           ftimex(&t2);
           do { /* wait for the start of a new tick */
              ftimex(&t1);
            }
            while (t2.time == t1.time && t2.millitm == t1.millitm);
           sleepms_old(10L * SLEEPINIT); /* about 1/4 sec */
           ftimex(&t2);
           if(keypressed()) {
              scalems = 0L;
              cleartempmsg();
              goto sleepexit;
           }
         }
         while ((elapsed = (int)(t2.time-t1.time)*1000 + t2.millitm-t1.millitm)
                < SLEEPINIT);
        /* once more to see if faster (eg multi-tasking) */
        do { /* wait for the start of a new tick */
           ftimex(&t1);
           }
         while (t2.time == t1.time && t2.millitm == t1.millitm);
        sleepms_old(10L * SLEEPINIT);
        ftimex(&t2);
        if ((i = (int)(t2.time-t1.time)*1000 + t2.millitm-t1.millitm) < elapsed)
           elapsed = (i == 0) ? 1 : i;
        scalems = (long)((float)SLEEPINIT/(float)(elapsed) * scalems);
        cleartempmsg();
    }
    if(ms > 10L * SLEEPINIT) { /* using ftime is probably more accurate */
        ms /= 10;
        ftimex(&t1);
        for(;;) {
           if(keypressed()) break;
           ftimex(&t2);
           if ((long)((t2.time-t1.time)*1000 + t2.millitm-t1.millitm) >= ms) break;
        }
    }
    else
        if(!keypressed()) {
           ms *= scalems;
           while(ms-- >= 0);
        }
sleepexit:
    tabmode  = savetabmode;
    helpmode = savehelpmode;
}

static void sleepms_new(long ms)
{
   uclock_t next_time;
   uclock_t now = usec_clock();
   next_time = now + ms*100;
   while ((now = usec_clock()) < next_time)
     if(keypressed()) break;
}

void sleepms(long ms)
{
  if(debugflag == 4020)
     sleepms_old(ms);   
  else
     sleepms_new(ms);
}

/*
 * wait until wait_time microseconds from the
 * last call has elapsed.
 */
#define MAX_INDEX 2
static uclock_t next_time[MAX_INDEX];
void wait_until(int index, uclock_t wait_time)
{
   if(debugflag == 4020)
      sleepms_old(wait_time);
   else
   {   
      uclock_t now;
      while ( (now = usec_clock()) < next_time[index])
         if(keypressed()) break;
      next_time[index] = now + wait_time*100; /* wait until this time next call */
   }
}

void reset_clock(void)
{
   int i;
   restart_uclock();
   for(i=0;i<MAX_INDEX;i++)
      next_time[i] = 0;
}

#define LOG2  (float)0.693147180
#define LOG32 (float)3.465735902

static FILE *snd_fp = NULL;

/* open sound file */
int snd_open(void)
{
   static char soundname[] = {"sound001.txt"};
   if((orbitsave&2) != 0 && snd_fp == NULL)
   {
      if((snd_fp = fopen(soundname,"w"))==NULL)
      {
         static FCODE msg[] = {"Can't open SOUND*.TXT"};
         stopmsg(0,msg);
      }
      else
      {
         updatesavename(soundname);
      }
   }
   return(snd_fp != NULL);
}

/* This routine plays a tone in the speaker and optionally writes a file
   if the orbitsave variable is turned on */
void w_snd(int tone)
{
   if((orbitsave&2) != 0)
   {
      if(snd_open())
         fprintf(snd_fp,"%-d\n",tone);
   }
   taborhelp = 0;
   if(!keypressed()) { /* keypressed calls mute() if TAB or F1 pressed */
               /* must not then call soundoff(), else indexes out of synch */
/*   if(20 < tone && tone < 15000)  better limits? */
/*   if(10 < tone && tone < 5000)  better limits? */
      if(soundon(tone)) {
         wait_until(0,orbit_delay);
         if(!taborhelp) /* kludge because wait_until() calls keypressed */
            soundoff();
      }
   }
}

void snd_time_write(void)
{
   if(snd_open())
   {
      fprintf(snd_fp,"time=%-ld\n",(long)clock()*1000/CLK_TCK);
   }
}

void close_snd(void)
{
   if(snd_fp)
      fclose(snd_fp);
   snd_fp = NULL;
}

static void _fastcall plotdorbit(double dx, double dy, int color)
{
   int i, j, c;
   int save_sxoffs,save_syoffs;
   if (orbit_ptr >= 1500) return;
   i = (int)(dy * plotmx1 - dx * plotmx2); i += sxoffs;
   if (i < 0 || i >= sxdots) return;
   j = (int)(dx * plotmy1 - dy * plotmy2); j += syoffs;
   if (j < 0 || j >= sydots) return;
   save_sxoffs = sxoffs;
   save_syoffs = syoffs;
   sxoffs = syoffs = 0;
   /* save orbit value */
   if(color == -1)
   {
      *(save_orbit + orbit_ptr++) = i;
      *(save_orbit + orbit_ptr++) = j;
      *(save_orbit + orbit_ptr++) = c = getcolor(i,j);
      putcolor(i,j,c^orbit_color);
   }
   else
      putcolor(i,j,color);
   sxoffs = save_sxoffs;
   syoffs = save_syoffs;
   if(debugflag == 4030) {
      if((soundflag&7) == 2) /* sound = x */
           w_snd((int)(i*1000/xdots+basehertz));
      else if((soundflag&7) > 2) /* sound = y or z */
           w_snd((int)(j*1000/ydots+basehertz));
      else if(orbit_delay > 0) 
      {
         wait_until(0,orbit_delay);
      }
   }
   else {
      if((soundflag&7) == 2) /* sound = x */
           w_snd((int)(i+basehertz));
      else if((soundflag&7) == 3) /* sound = y */
           w_snd((int)(j+basehertz));
      else if((soundflag&7) == 4) /* sound = z */
           w_snd((int)(i+j+basehertz));
      else if(orbit_delay > 0) 
      {
         wait_until(0,orbit_delay);
      }
   }

   /* placing sleepms here delays each dot */
}

void iplot_orbit(long ix, long iy, int color)
{
   plotdorbit((double)ix/fudge-xxmin,(double)iy/fudge-yymax,color);
}

void plot_orbit(double real,double imag,int color)
{
   plotdorbit(real-xxmin,imag-yymax,color);
}

void scrub_orbit(void)
{
   int i,j,c;
   int save_sxoffs,save_syoffs;
   mute();
   save_sxoffs = sxoffs;
   save_syoffs = syoffs;
   sxoffs = syoffs = 0;
   while(orbit_ptr > 0)
   {
      c = *(save_orbit + --orbit_ptr);
      j = *(save_orbit + --orbit_ptr);
      i = *(save_orbit + --orbit_ptr);
      putcolor(i,j,c);
   }
   sxoffs = save_sxoffs;
   syoffs = save_syoffs;
}


int add_worklist(int xfrom, int xto, int xbegin,
int yfrom, int yto, int ybegin,
int pass, int sym)
{
   if (num_worklist >= MAXCALCWORK)
      return(-1);
   worklist[num_worklist].xxstart = xfrom;
   worklist[num_worklist].xxstop  = xto;
   worklist[num_worklist].xxbegin = xbegin;
   worklist[num_worklist].yystart = yfrom;
   worklist[num_worklist].yystop  = yto;
   worklist[num_worklist].yybegin = ybegin;
   worklist[num_worklist].pass    = pass;
   worklist[num_worklist].sym     = sym;
   ++num_worklist;
   tidy_worklist();
   return(0);
}

static int _fastcall combine_worklist(void) /* look for 2 entries which can freely merge */
{
   int i,j;
   for (i=0; i<num_worklist; ++i)
      if (worklist[i].yystart == worklist[i].yybegin)
         for (j=i+1; j<num_worklist; ++j)
            if (worklist[j].sym == worklist[i].sym
                && worklist[j].yystart == worklist[j].yybegin
                && worklist[j].xxstart == worklist[j].xxbegin
                && worklist[i].pass == worklist[j].pass)
            {
               if ( worklist[i].xxstart == worklist[j].xxstart
                   && worklist[i].xxbegin == worklist[j].xxbegin
                   && worklist[i].xxstop  == worklist[j].xxstop)
               {
                  if (worklist[i].yystop+1 == worklist[j].yystart)
                  {
                     worklist[i].yystop = worklist[j].yystop;
                     return(j);
                  }
                  if (worklist[j].yystop+1 == worklist[i].yystart)
                  {
                     worklist[i].yystart = worklist[j].yystart;
                     worklist[i].yybegin = worklist[j].yybegin;
                     return(j);
                  }
               }
               if ( worklist[i].yystart == worklist[j].yystart
                   && worklist[i].yybegin == worklist[j].yybegin
                   && worklist[i].yystop  == worklist[j].yystop)
               {
                  if (worklist[i].xxstop+1 == worklist[j].xxstart)
                  {
                     worklist[i].xxstop = worklist[j].xxstop;
                     return(j);
                  }
                  if (worklist[j].xxstop+1 == worklist[i].xxstart)
                  {
                     worklist[i].xxstart = worklist[j].xxstart;
                     worklist[i].xxbegin = worklist[j].xxbegin;
                     return(j);
                  }
               }
            }
   return(0); /* nothing combined */
}

void tidy_worklist(void) /* combine mergeable entries, resort */
{
   int i,j;
   WORKLIST tempwork;
   while ((i=combine_worklist()) != 0)
   { /* merged two, delete the gone one */
      while (++i < num_worklist)
         worklist[i-1] = worklist[i];
      --num_worklist;
   }
   for (i=0; i<num_worklist; ++i)
      for (j=i+1; j<num_worklist; ++j)
         if (worklist[j].pass < worklist[i].pass
             || (worklist[j].pass == worklist[i].pass
             && (worklist[j].yystart < worklist[i].yystart
             || (   worklist[j].yystart == worklist[i].yystart
             && worklist[j].xxstart <  worklist[i].xxstart))))
         { /* dumb sort, swap 2 entries to correct order */
            tempwork = worklist[i];
            worklist[i] = worklist[j];
            worklist[j] = tempwork;
         }
}


void get_julia_attractor (double real, double imag)
{
   _LCMPLX lresult;
   _CMPLX result;
   int savper;
   long savmaxit;
   int i;

   if (attractors == 0 && finattract == 0) /* not magnet & not requested */
      return;

   if (attractors >= N_ATTR)     /* space for more attractors ?  */
      return;                  /* Bad luck - no room left !    */

   savper = periodicitycheck;
   savmaxit = maxit;
   periodicitycheck = 0;
   old.x = real;                    /* prepare for f.p orbit calc */
   old.y = imag;
   tempsqrx = sqr(old.x);
   tempsqry = sqr(old.y);

   lold.x = (long)real;     /* prepare for int orbit calc */
   lold.y = (long)imag;
   ltempsqrx = (long)tempsqrx;
   ltempsqry = (long)tempsqry;

   lold.x = lold.x << bitshift;
   lold.y = lold.y << bitshift;
   ltempsqrx = ltempsqrx << bitshift;
   ltempsqry = ltempsqry << bitshift;

   if (maxit < 500)         /* we're going to try at least this hard */
      maxit = 500;
   coloriter = 0;
   overflow = 0;
   while (++coloriter < maxit)
      if(curfractalspecific->orbitcalc() || overflow)
         break;
   if (coloriter >= maxit)      /* if orbit stays in the lake */
   {
      if (integerfractal)   /* remember where it went to */
         lresult = lnew;
      else
         result =  new;
     for (i=0;i<10;i++) {
      overflow = 0;
      if(!curfractalspecific->orbitcalc() && !overflow) /* if it stays in the lake */
      {                        /* and doesn't move far, probably */
         if (integerfractal)   /*   found a finite attractor    */
         {
            if(labs(lresult.x-lnew.x) < lclosenuff
                && labs(lresult.y-lnew.y) < lclosenuff)
            {
               lattr[attractors] = lnew;
               attrperiod[attractors] = i+1;
               attractors++;   /* another attractor - coloured lakes ! */
               break;
            }
         }
         else
         {
            if(fabs(result.x-new.x) < closenuff
                && fabs(result.y-new.y) < closenuff)
            {
               attr[attractors] = new;
               attrperiod[attractors] = i+1;
               attractors++;   /* another attractor - coloured lakes ! */
               break;
            }
         }
      } else {
          break;
      }
     }
   }
   if(attractors==0)
      periodicitycheck = savper;
   maxit = savmaxit;
}


#define maxyblk 7    /* must match calcfrac.c */
#define maxxblk 202  /* must match calcfrac.c */
int ssg_blocksize(void) /* used by solidguessing and by zoom panning */
{
   int blocksize,i;
   /* blocksize 4 if <300 rows, 8 if 300-599, 16 if 600-1199, 32 if >=1200 */
   blocksize=4;
   i=300;
   while(i<=ydots)
   {
      blocksize+=blocksize;
      i+=i;
   }
   /* increase blocksize if prefix array not big enough */
   while(blocksize*(maxxblk-2)<xdots || blocksize*(maxyblk-2)*16<ydots)
      blocksize+=blocksize;
   return(blocksize);
}