1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
|
## Configuration
**Alternatively** to using the config-script, you can also do it by hand:
The driver can be reconfigured at runtime by accessing the following sysfs
files in `/sys/module/hid_xpadneo/parameters`:
- `disable_deadzones` (default `0`)
- `0` enables standard behavior to be compatible with `joydev` expectations
- `1` enables raw passthrough of axis values without dead zones for high-precision use with modern Wine/Proton or other games implementing circular deadzones
- `trigger_rumble_mode` (default `0`)
- `0` rumbles triggers by pressure and current rumble effect
- `1` rumbles triggers by force direction (non-conformant)
- `2` disables trigger rumble
- `rumble_attenuation` (default `0,0`)
- Attenuation the strength of the force feedback
- `0` (none, full rumble) to `100` (max, no rumble)
- If one or two values are given, the first value is the overall attenuation
- If two values are given, the second value applies an extra attenuation to the triggers
- Example 1: `0,100` turns trigger rumble off, `100,0` or `100` turn all rumble off
- Example 2: `50,50` makes 50% rumble overall, and 25% for the triggers (50% of 50% = 25%)
- Example 3: `50` makes 50% rumble overall (main and triggers)
- Trigger-only rumble is not possible
- `quirks` (default empty)
- Let's you adjust the quirk mode of your controller
- Comma separated list of `address:flags` pairs
- Specify your controller MAC address in the format `11:22:33:44:55:66`
- Specify the flags as sum of the following:
- `1` if your controller does not support pulse parameters (i.e., 8BitDo controllers)
- `2` if your controller does not support trigger rumble (most clones in compatibility mode)
- `4` if your controller does not support individual motor programming (i.e., 8BitDo controllers)
- `8` if your controller supports hardware profiles (hard-coded per model, do not set manually)
- `16` if your controller boots in Linux mode (auto-detected, do not change manually)
- `32` if you prefer to use Nintendo button mappings (i.e., 8BitDo controllers, defaults to off)
- `64` if your controller has a awkwardly mapped Share button (auto-detected, do not set manually)
- `128` if your controller uses motor-enable bits in reverse
- `256` if your controller uses motor-enable bits with trigger and main motors swapped
- `512` to avoid having your controller misdetected by heuristics (please report a bug)
- 'disable_shift_mode' (default 0)
- Let's you disable Xbox logo button shift behavior
- '0' Xbox logo button will be used as shift
- '1' will pass through the Xbox logo button as is
Some settings may need to be changed at loading time of the module, take a look at the following example to see how
that works:
### Example
To disable trigger rumbling temporarily, run
`echo 2 | sudo tee /sys/module/hid_xpadneo/parameters/trigger_rumble_mode`
To make the setting permanent and applied at loading time, try
`echo "options hid_xpadneo trigger_rumble_mode=2" | sudo tee /etc/modprobe.d/99-xpadneo-bluetooth.conf`
|
