1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
|
/*
gencfg.c - Generate z8530drv.conf from PE1CHL driver params
Copyright 1994-1996, by Joerg Reuter dl1bke@lykos.oche.de
This program is intended for Amateur Radio use. If you are running it
for commercial purposes, please drop me a note. I am nosy...
! You m u s t recognize the appropriate legislations of your country !
! before you connect a radio to the SCC board and start to transmit or !
! receive. The GPL allows you to use the d r i v e r, NOT the RADIO! !
For non-Amateur-Radio use please note that you might need a special
allowance/licence from the designer of the SCC Board and/or the
MODEM.
This program is free software; you can redistribute it and/or modify
it under the terms of the (modified) GNU General Public License
delivered with the LinuX kernel source.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should find a copy of the GNU General Public License in
/usr/src/linux/COPYING;
*/
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <linux/sockios.h>
#ifdef CONFIG_SCC_STANDALONE
#include "scc.h"
#else
#include <linux/scc.h>
#endif
#define RCS_ID "$Id: gencfg.c,v 1.4 1995/11/17 01:11:27 jreuter Exp jreuter $"
/* yes, it IS awkward... */
int devices, chan, address, spacing, Aoff, Boff, Dataoff, intack, vector,
hdwe, param, sp, chip;
char *board;
int cs(unsigned char *s)
{
unsigned char k[40];
int x;
strcpy(k, s);
for (x = 0; k[x]; x++)
k[x] = toupper(k[x]);
s = k;
if (*s == '0')
{ s++;
if (*s == 'X')
{
s++;
sscanf(s,"%x",&x);
return x;
}
return 0;
}
if (!strcmp(s,"PA0HZP") || !strcmp(s,"SCC")) return PA0HZP;
if (!strcmp(s,"EAGLE")) return EAGLE;
if (!strcmp(s,"PC100")) return PC100;
if (!strcmp(s,"PRIMUS")) return PRIMUS;
if (!strcmp(s,"DRSI")) return DRSI;
if (!strcmp(s,"BAYCOM")) return BAYCOM;
return atoi(s);
}
int main (int argc, char **argv)
{
long unsigned clock;
if (argc < 10)
{
fprintf(stderr,"usage: gencfg <devices> <address> <spacing> <Aoff> <Boff> <Dataoff> <intack>\n");
fprintf(stderr," <vector> <clock> [hdwe] [param]\n\n");
if (argc < 2)
{
fprintf(stderr,"<devices>: number of chips installed\n");
fprintf(stderr,"<address>: base address of the first SCC chip\n");
fprintf(stderr,"<spacing>: the spacing between the SCC chip base addresses\n");
fprintf(stderr,"<Aoff> : offset from a chip's base address to its channel A ctrl register\n");
fprintf(stderr,"<Boff> : offset from a chip's base address to its channel B ctrl register\n");
fprintf(stderr,"<Dataoff>: offset from each channel's ctrl register to its data register\n");
fprintf(stderr,"<intack> : the address of the INTACK Vector port. If none, specify 0\n");
fprintf(stderr,"<vector> : the CPU interrupt vector for all connected SCCs\n");
fprintf(stderr,"<clock> : the clock frequency (PCLK) of all SCCs in Hertz\n");
fprintf(stderr,"[hdwe] : (optional) hardware type\n");
fprintf(stderr,"[param] : (optional) extra param\n\n");
fprintf(stderr,"Notes:\n");
fprintf(stderr,"(1) use this program ONLY if you configured the PE1CHL SCC driver under\n");
fprintf(stderr," DOS before. It is much EASIER to edit /etc/z8530drv.conf and setup the\n");
fprintf(stderr," needed params there.\n\n");
fprintf(stderr,"(2) all parameters must be specified in hex (0x300) or decimal (10).\n\n");
fprintf(stderr,"(3) <clock> means the clock on the PClk pin. If you are using a DRSI\n");
fprintf(stderr," card set the \"clock\" parameter in /etc/z8530drv.conf to \"external.\"\n\n");
}
fprintf(stderr,"expample for the PA0HZP card:\n");
fprintf(stderr,"gencfg 2 0x150 4 2 0 1 0x168 9 4915200 0 0 >z8530drv.conf\n\n");
return 1;
}
devices = cs(argv[1]);
address = cs(argv[2]);
spacing = cs(argv[3]);
Aoff = cs(argv[4]);
Boff = cs(argv[5]);
Dataoff = cs(argv[6]);
intack = cs(argv[7]);
vector = cs(argv[8]);
clock = atol(argv[9]);
if (argc > 10)
hdwe = cs(argv[10]);
else
hdwe = 0;
if (argc > 11)
param = cs(argv[11]);
else
param = 0;
switch(hdwe)
{
case PA0HZP: board = "PA0HZP"; sp = 0; break;
case EAGLE: board = "EAGLE"; sp = address + 4; break;
case PC100: board = "PC100"; sp = address; break;
case PRIMUS: board = "PRIMUS"; sp = address + 4; break;
case DRSI: board = "DRSI"; sp = address + 7; break;
case BAYCOM: board = "BAYCOM"; sp = 0; break;
default: sprintf(board,"0x%2.2x", hdwe); sp = 0;
}
printf("# z8530drv.conf\n");
printf("# file generated by %s\n#\n#\n", RCS_ID);
for (chip = 0; chip < devices; chip++)
{
printf("chip %d\n", chip+1);
printf("data_a 0x%3.3x\n", address + spacing*chip + Aoff + Dataoff);
printf("data_b 0x%3.3x\n", address + spacing*chip + Boff + Dataoff);
printf("ctrl_a 0x%3.3x\n", address + spacing*chip + Aoff);
printf("ctrl_b 0x%3.3x\n", address + spacing*chip + Boff);
printf("irq %d\n", vector);
printf("pclock %lu\n", clock);
printf("board %s\n", board);
if (intack)
printf("vector 0x%3.3x\n", intack);
if (sp)
{
printf("special 0x%3.3x\n", sp);
printf("option 0x%2.2x\n", param);
}
printf("escc no\n#\n#\n#\n");
}
printf("# the following is a skelleton of the MODEM and KISS parameter\n");
printf("# definitions. Adjust to your situation.\n");
printf("#\n");
for (chan = 0; chan < devices * 2; chan++)
{
printf("device /dev/scc%d\n", chan);
printf("speed 1200\t# baudrate\n");
printf("clock dpll\t# clock source\n");
printf("mode nrzi\t# NRZI or NRZ\n");
printf("#\n");
printf("txdelay 36\n");
printf("persist 64\n");
printf("slot 8\n");
printf("tail 8\n");
printf("fulldup 0\n");
printf("wait 12\n");
printf("min 3\n");
printf("maxkey 7\n");
printf("idle 3\n");
printf("maxdef 120\n");
printf("group 0\n");
printf("txoff off\n");
printf("softdcd on\n");
printf("#\n#\n#\n");
}
printf("# EOF\n");
return 0;
}
|
