1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851
|
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (C) 2008-2010 Lawrence Livermore National Security, LLC.
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* Rewritten for Linux by Brian Behlendorf <behlendorf1@llnl.gov>.
* LLNL-CODE-403049.
* Copyright (c) 2012, 2015 by Delphix. All rights reserved.
*/
#include <sys/zfs_context.h>
#include <sys/spa_impl.h>
#include <sys/vdev_disk.h>
#include <sys/vdev_impl.h>
#include <sys/abd.h>
#include <sys/fs/zfs.h>
#include <sys/zio.h>
#include <sys/sunldi.h>
#include <linux/mod_compat.h>
char *zfs_vdev_scheduler = VDEV_SCHEDULER;
static void *zfs_vdev_holder = VDEV_HOLDER;
/*
* Virtual device vector for disks.
*/
typedef struct dio_request {
zio_t *dr_zio; /* Parent ZIO */
atomic_t dr_ref; /* References */
int dr_error; /* Bio error */
int dr_bio_count; /* Count of bio's */
struct bio *dr_bio[0]; /* Attached bio's */
} dio_request_t;
#ifdef HAVE_OPEN_BDEV_EXCLUSIVE
static fmode_t
vdev_bdev_mode(int smode)
{
fmode_t mode = 0;
ASSERT3S(smode & (FREAD | FWRITE), !=, 0);
if (smode & FREAD)
mode |= FMODE_READ;
if (smode & FWRITE)
mode |= FMODE_WRITE;
return (mode);
}
#else
static int
vdev_bdev_mode(int smode)
{
int mode = 0;
ASSERT3S(smode & (FREAD | FWRITE), !=, 0);
if ((smode & FREAD) && !(smode & FWRITE))
mode = MS_RDONLY;
return (mode);
}
#endif /* HAVE_OPEN_BDEV_EXCLUSIVE */
static uint64_t
bdev_capacity(struct block_device *bdev)
{
struct hd_struct *part = bdev->bd_part;
/* The partition capacity referenced by the block device */
if (part)
return (part->nr_sects << 9);
/* Otherwise assume the full device capacity */
return (get_capacity(bdev->bd_disk) << 9);
}
static void
vdev_disk_error(zio_t *zio)
{
#ifdef ZFS_DEBUG
printk("ZFS: zio error=%d type=%d offset=%llu size=%llu "
"flags=%x\n", zio->io_error, zio->io_type,
(u_longlong_t)zio->io_offset, (u_longlong_t)zio->io_size,
zio->io_flags);
#endif
}
/*
* Use the Linux 'noop' elevator for zfs managed block devices. This
* strikes the ideal balance by allowing the zfs elevator to do all
* request ordering and prioritization. While allowing the Linux
* elevator to do the maximum front/back merging allowed by the
* physical device. This yields the largest possible requests for
* the device with the lowest total overhead.
*/
static void
vdev_elevator_switch(vdev_t *v, char *elevator)
{
vdev_disk_t *vd = v->vdev_tsd;
struct request_queue *q;
char *device;
int error;
for (int c = 0; c < v->vdev_children; c++)
vdev_elevator_switch(v->vdev_child[c], elevator);
if (!v->vdev_ops->vdev_op_leaf || vd->vd_bdev == NULL)
return;
q = bdev_get_queue(vd->vd_bdev);
device = vd->vd_bdev->bd_disk->disk_name;
/*
* Skip devices which are not whole disks (partitions).
* Device-mapper devices are excepted since they may be whole
* disks despite the vdev_wholedisk flag, in which case we can
* and should switch the elevator. If the device-mapper device
* does not have an elevator (i.e. dm-raid, dm-crypt, etc.) the
* "Skip devices without schedulers" check below will fail.
*/
if (!v->vdev_wholedisk && strncmp(device, "dm-", 3) != 0)
return;
/* Leave existing scheduler when set to "none" */
if ((strncmp(elevator, "none", 4) == 0) && (strlen(elevator) == 4))
return;
/*
* The elevator_change() function was available in kernels from
* 2.6.36 to 4.11. When not available fall back to using the user
* mode helper functionality to set the elevator via sysfs. This
* requires /bin/echo and sysfs to be mounted which may not be true
* early in the boot process.
*/
#ifdef HAVE_ELEVATOR_CHANGE
error = elevator_change(q, elevator);
#else
#define SET_SCHEDULER_CMD \
"exec 0</dev/null " \
" 1>/sys/block/%s/queue/scheduler " \
" 2>/dev/null; " \
"echo %s"
char *argv[] = { "/bin/sh", "-c", NULL, NULL };
char *envp[] = { NULL };
argv[2] = kmem_asprintf(SET_SCHEDULER_CMD, device, elevator);
error = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
strfree(argv[2]);
#endif /* HAVE_ELEVATOR_CHANGE */
if (error) {
zfs_dbgmsg("Unable to set \"%s\" scheduler for %s (%s): %d\n",
elevator, v->vdev_path, device, error);
}
}
/*
* Expanding a whole disk vdev involves invoking BLKRRPART on the
* whole disk device. This poses a problem, because BLKRRPART will
* return EBUSY if one of the disk's partitions is open. That's why
* we have to do it here, just before opening the data partition.
* Unfortunately, BLKRRPART works by dropping all partitions and
* recreating them, which means that for a short time window, all
* /dev/sdxN device files disappear (until udev recreates them).
* This means two things:
* - When we open the data partition just after a BLKRRPART, we
* can't do it using the normal device file path because of the
* obvious race condition with udev. Instead, we use reliable
* kernel APIs to get a handle to the new partition device from
* the whole disk device.
* - Because vdev_disk_open() initially needs to find the device
* using its path, multiple vdev_disk_open() invocations in
* short succession on the same disk with BLKRRPARTs in the
* middle have a high probability of failure (because of the
* race condition with udev). A typical situation where this
* might happen is when the zpool userspace tool does a
* TRYIMPORT immediately followed by an IMPORT. For this
* reason, we only invoke BLKRRPART in the module when strictly
* necessary (zpool online -e case), and rely on userspace to
* do it when possible.
*/
static struct block_device *
vdev_disk_rrpart(const char *path, int mode, vdev_disk_t *vd)
{
#if defined(HAVE_3ARG_BLKDEV_GET) && defined(HAVE_GET_GENDISK)
struct block_device *bdev, *result = ERR_PTR(-ENXIO);
struct gendisk *disk;
int error, partno;
bdev = vdev_bdev_open(path, vdev_bdev_mode(mode), zfs_vdev_holder);
if (IS_ERR(bdev))
return (bdev);
disk = get_gendisk(bdev->bd_dev, &partno);
vdev_bdev_close(bdev, vdev_bdev_mode(mode));
if (disk) {
bdev = bdget(disk_devt(disk));
if (bdev) {
error = blkdev_get(bdev, vdev_bdev_mode(mode), vd);
if (error == 0)
error = ioctl_by_bdev(bdev, BLKRRPART, 0);
vdev_bdev_close(bdev, vdev_bdev_mode(mode));
}
bdev = bdget_disk(disk, partno);
if (bdev) {
error = blkdev_get(bdev,
vdev_bdev_mode(mode) | FMODE_EXCL, vd);
if (error == 0)
result = bdev;
}
put_disk(disk);
}
return (result);
#else
return (ERR_PTR(-EOPNOTSUPP));
#endif /* defined(HAVE_3ARG_BLKDEV_GET) && defined(HAVE_GET_GENDISK) */
}
static int
vdev_disk_open(vdev_t *v, uint64_t *psize, uint64_t *max_psize,
uint64_t *ashift)
{
struct block_device *bdev = ERR_PTR(-ENXIO);
vdev_disk_t *vd;
int count = 0, mode, block_size;
/* Must have a pathname and it must be absolute. */
if (v->vdev_path == NULL || v->vdev_path[0] != '/') {
v->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL;
return (SET_ERROR(EINVAL));
}
/*
* Reopen the device if it's not currently open. Otherwise,
* just update the physical size of the device.
*/
if (v->vdev_tsd != NULL) {
ASSERT(v->vdev_reopening);
vd = v->vdev_tsd;
goto skip_open;
}
vd = kmem_zalloc(sizeof (vdev_disk_t), KM_SLEEP);
if (vd == NULL)
return (SET_ERROR(ENOMEM));
/*
* Devices are always opened by the path provided at configuration
* time. This means that if the provided path is a udev by-id path
* then drives may be recabled without an issue. If the provided
* path is a udev by-path path, then the physical location information
* will be preserved. This can be critical for more complicated
* configurations where drives are located in specific physical
* locations to maximize the systems tolerence to component failure.
* Alternatively, you can provide your own udev rule to flexibly map
* the drives as you see fit. It is not advised that you use the
* /dev/[hd]d devices which may be reordered due to probing order.
* Devices in the wrong locations will be detected by the higher
* level vdev validation.
*
* The specified paths may be briefly removed and recreated in
* response to udev events. This should be exceptionally unlikely
* because the zpool command makes every effort to verify these paths
* have already settled prior to reaching this point. Therefore,
* a ENOENT failure at this point is highly likely to be transient
* and it is reasonable to sleep and retry before giving up. In
* practice delays have been observed to be on the order of 100ms.
*/
mode = spa_mode(v->vdev_spa);
if (v->vdev_wholedisk && v->vdev_expanding)
bdev = vdev_disk_rrpart(v->vdev_path, mode, vd);
while (IS_ERR(bdev) && count < 50) {
bdev = vdev_bdev_open(v->vdev_path,
vdev_bdev_mode(mode), zfs_vdev_holder);
if (unlikely(PTR_ERR(bdev) == -ENOENT)) {
msleep(10);
count++;
} else if (IS_ERR(bdev)) {
break;
}
}
if (IS_ERR(bdev)) {
dprintf("failed open v->vdev_path=%s, error=%d count=%d\n",
v->vdev_path, -PTR_ERR(bdev), count);
kmem_free(vd, sizeof (vdev_disk_t));
return (SET_ERROR(-PTR_ERR(bdev)));
}
v->vdev_tsd = vd;
vd->vd_bdev = bdev;
skip_open:
/* Determine the physical block size */
block_size = vdev_bdev_block_size(vd->vd_bdev);
/* Clear the nowritecache bit, causes vdev_reopen() to try again. */
v->vdev_nowritecache = B_FALSE;
/* Inform the ZIO pipeline that we are non-rotational */
v->vdev_nonrot = blk_queue_nonrot(bdev_get_queue(vd->vd_bdev));
/* Physical volume size in bytes */
*psize = bdev_capacity(vd->vd_bdev);
/* TODO: report possible expansion size */
*max_psize = *psize;
/* Based on the minimum sector size set the block size */
*ashift = highbit64(MAX(block_size, SPA_MINBLOCKSIZE)) - 1;
/* Try to set the io scheduler elevator algorithm */
(void) vdev_elevator_switch(v, zfs_vdev_scheduler);
return (0);
}
static void
vdev_disk_close(vdev_t *v)
{
vdev_disk_t *vd = v->vdev_tsd;
if (v->vdev_reopening || vd == NULL)
return;
if (vd->vd_bdev != NULL)
vdev_bdev_close(vd->vd_bdev,
vdev_bdev_mode(spa_mode(v->vdev_spa)));
kmem_free(vd, sizeof (vdev_disk_t));
v->vdev_tsd = NULL;
}
static dio_request_t *
vdev_disk_dio_alloc(int bio_count)
{
dio_request_t *dr;
int i;
dr = kmem_zalloc(sizeof (dio_request_t) +
sizeof (struct bio *) * bio_count, KM_SLEEP);
if (dr) {
atomic_set(&dr->dr_ref, 0);
dr->dr_bio_count = bio_count;
dr->dr_error = 0;
for (i = 0; i < dr->dr_bio_count; i++)
dr->dr_bio[i] = NULL;
}
return (dr);
}
static void
vdev_disk_dio_free(dio_request_t *dr)
{
int i;
for (i = 0; i < dr->dr_bio_count; i++)
if (dr->dr_bio[i])
bio_put(dr->dr_bio[i]);
kmem_free(dr, sizeof (dio_request_t) +
sizeof (struct bio *) * dr->dr_bio_count);
}
static void
vdev_disk_dio_get(dio_request_t *dr)
{
atomic_inc(&dr->dr_ref);
}
static int
vdev_disk_dio_put(dio_request_t *dr)
{
int rc = atomic_dec_return(&dr->dr_ref);
/*
* Free the dio_request when the last reference is dropped and
* ensure zio_interpret is called only once with the correct zio
*/
if (rc == 0) {
zio_t *zio = dr->dr_zio;
int error = dr->dr_error;
vdev_disk_dio_free(dr);
if (zio) {
zio->io_error = error;
ASSERT3S(zio->io_error, >=, 0);
if (zio->io_error)
vdev_disk_error(zio);
zio_delay_interrupt(zio);
}
}
return (rc);
}
BIO_END_IO_PROTO(vdev_disk_physio_completion, bio, error)
{
dio_request_t *dr = bio->bi_private;
int rc;
if (dr->dr_error == 0) {
#ifdef HAVE_1ARG_BIO_END_IO_T
dr->dr_error = BIO_END_IO_ERROR(bio);
#else
if (error)
dr->dr_error = -(error);
else if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
dr->dr_error = EIO;
#endif
}
/* Drop reference acquired by __vdev_disk_physio */
rc = vdev_disk_dio_put(dr);
}
static unsigned int
bio_map(struct bio *bio, void *bio_ptr, unsigned int bio_size)
{
unsigned int offset, size, i;
struct page *page;
offset = offset_in_page(bio_ptr);
for (i = 0; i < bio->bi_max_vecs; i++) {
size = PAGE_SIZE - offset;
if (bio_size <= 0)
break;
if (size > bio_size)
size = bio_size;
if (is_vmalloc_addr(bio_ptr))
page = vmalloc_to_page(bio_ptr);
else
page = virt_to_page(bio_ptr);
/*
* Some network related block device uses tcp_sendpage, which
* doesn't behave well when using 0-count page, this is a
* safety net to catch them.
*/
ASSERT3S(page_count(page), >, 0);
if (bio_add_page(bio, page, size, offset) != size)
break;
bio_ptr += size;
bio_size -= size;
offset = 0;
}
return (bio_size);
}
static unsigned int
bio_map_abd_off(struct bio *bio, abd_t *abd, unsigned int size, size_t off)
{
if (abd_is_linear(abd))
return (bio_map(bio, ((char *)abd_to_buf(abd)) + off, size));
return (abd_scatter_bio_map_off(bio, abd, size, off));
}
static inline void
vdev_submit_bio_impl(struct bio *bio)
{
#ifdef HAVE_1ARG_SUBMIT_BIO
submit_bio(bio);
#else
submit_bio(0, bio);
#endif
}
#ifndef HAVE_BIO_SET_DEV
static inline void
bio_set_dev(struct bio *bio, struct block_device *bdev)
{
bio->bi_bdev = bdev;
}
#endif /* !HAVE_BIO_SET_DEV */
static inline void
vdev_submit_bio(struct bio *bio)
{
#ifdef HAVE_CURRENT_BIO_TAIL
struct bio **bio_tail = current->bio_tail;
current->bio_tail = NULL;
vdev_submit_bio_impl(bio);
current->bio_tail = bio_tail;
#else
struct bio_list *bio_list = current->bio_list;
current->bio_list = NULL;
vdev_submit_bio_impl(bio);
current->bio_list = bio_list;
#endif
}
static int
__vdev_disk_physio(struct block_device *bdev, zio_t *zio,
size_t io_size, uint64_t io_offset, int rw, int flags)
{
dio_request_t *dr;
uint64_t abd_offset;
uint64_t bio_offset;
int bio_size, bio_count = 16;
int i = 0, error = 0;
#if defined(HAVE_BLK_QUEUE_HAVE_BLK_PLUG)
struct blk_plug plug;
#endif
ASSERT(zio != NULL);
ASSERT3U(io_offset + io_size, <=, bdev->bd_inode->i_size);
retry:
dr = vdev_disk_dio_alloc(bio_count);
if (dr == NULL)
return (ENOMEM);
if (zio && !(zio->io_flags & (ZIO_FLAG_IO_RETRY | ZIO_FLAG_TRYHARD)))
bio_set_flags_failfast(bdev, &flags);
dr->dr_zio = zio;
/*
* When the IO size exceeds the maximum bio size for the request
* queue we are forced to break the IO in multiple bio's and wait
* for them all to complete. Ideally, all pool users will set
* their volume block size to match the maximum request size and
* the common case will be one bio per vdev IO request.
*/
abd_offset = 0;
bio_offset = io_offset;
bio_size = io_size;
for (i = 0; i <= dr->dr_bio_count; i++) {
/* Finished constructing bio's for given buffer */
if (bio_size <= 0)
break;
/*
* By default only 'bio_count' bio's per dio are allowed.
* However, if we find ourselves in a situation where more
* are needed we allocate a larger dio and warn the user.
*/
if (dr->dr_bio_count == i) {
vdev_disk_dio_free(dr);
bio_count *= 2;
goto retry;
}
/* bio_alloc() with __GFP_WAIT never returns NULL */
dr->dr_bio[i] = bio_alloc(GFP_NOIO,
MIN(abd_nr_pages_off(zio->io_abd, bio_size, abd_offset),
BIO_MAX_PAGES));
if (unlikely(dr->dr_bio[i] == NULL)) {
vdev_disk_dio_free(dr);
return (ENOMEM);
}
/* Matching put called by vdev_disk_physio_completion */
vdev_disk_dio_get(dr);
bio_set_dev(dr->dr_bio[i], bdev);
BIO_BI_SECTOR(dr->dr_bio[i]) = bio_offset >> 9;
dr->dr_bio[i]->bi_end_io = vdev_disk_physio_completion;
dr->dr_bio[i]->bi_private = dr;
bio_set_op_attrs(dr->dr_bio[i], rw, flags);
/* Remaining size is returned to become the new size */
bio_size = bio_map_abd_off(dr->dr_bio[i], zio->io_abd,
bio_size, abd_offset);
/* Advance in buffer and construct another bio if needed */
abd_offset += BIO_BI_SIZE(dr->dr_bio[i]);
bio_offset += BIO_BI_SIZE(dr->dr_bio[i]);
}
/* Extra reference to protect dio_request during vdev_submit_bio */
vdev_disk_dio_get(dr);
#if defined(HAVE_BLK_QUEUE_HAVE_BLK_PLUG)
if (dr->dr_bio_count > 1)
blk_start_plug(&plug);
#endif
/* Submit all bio's associated with this dio */
for (i = 0; i < dr->dr_bio_count; i++)
if (dr->dr_bio[i])
vdev_submit_bio(dr->dr_bio[i]);
#if defined(HAVE_BLK_QUEUE_HAVE_BLK_PLUG)
if (dr->dr_bio_count > 1)
blk_finish_plug(&plug);
#endif
(void) vdev_disk_dio_put(dr);
return (error);
}
BIO_END_IO_PROTO(vdev_disk_io_flush_completion, bio, error)
{
zio_t *zio = bio->bi_private;
#ifdef HAVE_1ARG_BIO_END_IO_T
zio->io_error = BIO_END_IO_ERROR(bio);
#else
zio->io_error = -error;
#endif
if (zio->io_error && (zio->io_error == EOPNOTSUPP))
zio->io_vd->vdev_nowritecache = B_TRUE;
bio_put(bio);
ASSERT3S(zio->io_error, >=, 0);
if (zio->io_error)
vdev_disk_error(zio);
zio_interrupt(zio);
}
static int
vdev_disk_io_flush(struct block_device *bdev, zio_t *zio)
{
struct request_queue *q;
struct bio *bio;
q = bdev_get_queue(bdev);
if (!q)
return (ENXIO);
bio = bio_alloc(GFP_NOIO, 0);
/* bio_alloc() with __GFP_WAIT never returns NULL */
if (unlikely(bio == NULL))
return (ENOMEM);
bio->bi_end_io = vdev_disk_io_flush_completion;
bio->bi_private = zio;
bio_set_dev(bio, bdev);
bio_set_flush(bio);
vdev_submit_bio(bio);
invalidate_bdev(bdev);
return (0);
}
static void
vdev_disk_io_start(zio_t *zio)
{
vdev_t *v = zio->io_vd;
vdev_disk_t *vd = v->vdev_tsd;
int rw, flags, error;
switch (zio->io_type) {
case ZIO_TYPE_IOCTL:
if (!vdev_readable(v)) {
zio->io_error = SET_ERROR(ENXIO);
zio_interrupt(zio);
return;
}
switch (zio->io_cmd) {
case DKIOCFLUSHWRITECACHE:
if (zfs_nocacheflush)
break;
if (v->vdev_nowritecache) {
zio->io_error = SET_ERROR(ENOTSUP);
break;
}
error = vdev_disk_io_flush(vd->vd_bdev, zio);
if (error == 0)
return;
zio->io_error = error;
break;
default:
zio->io_error = SET_ERROR(ENOTSUP);
}
zio_execute(zio);
return;
case ZIO_TYPE_WRITE:
rw = WRITE;
#if defined(HAVE_BLK_QUEUE_HAVE_BIO_RW_UNPLUG)
flags = (1 << BIO_RW_UNPLUG);
#elif defined(REQ_UNPLUG)
flags = REQ_UNPLUG;
#else
flags = 0;
#endif
break;
case ZIO_TYPE_READ:
rw = READ;
#if defined(HAVE_BLK_QUEUE_HAVE_BIO_RW_UNPLUG)
flags = (1 << BIO_RW_UNPLUG);
#elif defined(REQ_UNPLUG)
flags = REQ_UNPLUG;
#else
flags = 0;
#endif
break;
default:
zio->io_error = SET_ERROR(ENOTSUP);
zio_interrupt(zio);
return;
}
zio->io_target_timestamp = zio_handle_io_delay(zio);
error = __vdev_disk_physio(vd->vd_bdev, zio,
zio->io_size, zio->io_offset, rw, flags);
if (error) {
zio->io_error = error;
zio_interrupt(zio);
return;
}
}
static void
vdev_disk_io_done(zio_t *zio)
{
/*
* If the device returned EIO, we revalidate the media. If it is
* determined the media has changed this triggers the asynchronous
* removal of the device from the configuration.
*/
if (zio->io_error == EIO) {
vdev_t *v = zio->io_vd;
vdev_disk_t *vd = v->vdev_tsd;
if (check_disk_change(vd->vd_bdev)) {
vdev_bdev_invalidate(vd->vd_bdev);
v->vdev_remove_wanted = B_TRUE;
spa_async_request(zio->io_spa, SPA_ASYNC_REMOVE);
}
}
}
static void
vdev_disk_hold(vdev_t *vd)
{
ASSERT(spa_config_held(vd->vdev_spa, SCL_STATE, RW_WRITER));
/* We must have a pathname, and it must be absolute. */
if (vd->vdev_path == NULL || vd->vdev_path[0] != '/')
return;
/*
* Only prefetch path and devid info if the device has
* never been opened.
*/
if (vd->vdev_tsd != NULL)
return;
/* XXX: Implement me as a vnode lookup for the device */
vd->vdev_name_vp = NULL;
vd->vdev_devid_vp = NULL;
}
static void
vdev_disk_rele(vdev_t *vd)
{
ASSERT(spa_config_held(vd->vdev_spa, SCL_STATE, RW_WRITER));
/* XXX: Implement me as a vnode rele for the device */
}
static int
param_set_vdev_scheduler(const char *val, zfs_kernel_param_t *kp)
{
spa_t *spa = NULL;
char *p;
if (val == NULL)
return (SET_ERROR(-EINVAL));
if ((p = strchr(val, '\n')) != NULL)
*p = '\0';
if (spa_mode_global != 0) {
mutex_enter(&spa_namespace_lock);
while ((spa = spa_next(spa)) != NULL) {
if (spa_state(spa) != POOL_STATE_ACTIVE ||
!spa_writeable(spa) || spa_suspended(spa))
continue;
spa_open_ref(spa, FTAG);
mutex_exit(&spa_namespace_lock);
vdev_elevator_switch(spa->spa_root_vdev, (char *)val);
mutex_enter(&spa_namespace_lock);
spa_close(spa, FTAG);
}
mutex_exit(&spa_namespace_lock);
}
return (param_set_charp(val, kp));
}
vdev_ops_t vdev_disk_ops = {
vdev_disk_open,
vdev_disk_close,
vdev_default_asize,
vdev_disk_io_start,
vdev_disk_io_done,
NULL,
NULL,
vdev_disk_hold,
vdev_disk_rele,
VDEV_TYPE_DISK, /* name of this vdev type */
B_TRUE /* leaf vdev */
};
module_param_call(zfs_vdev_scheduler, param_set_vdev_scheduler,
param_get_charp, &zfs_vdev_scheduler, 0644);
MODULE_PARM_DESC(zfs_vdev_scheduler, "I/O scheduler");
|