| Home · All Classes · Modules |
The QDate class provides date functions. More...
The QDate class provides date functions.
A QDate object contains a calendar date, i.e. year, month, and day numbers, in the modern Western (Gregorian) calendar. It can read the current date from the system clock. It provides functions for comparing dates, and for manipulating dates. For example, it is possible to add and subtract days, months, and years to dates.
A QDate object is typically created either by giving the year, month, and day numbers explicitly, or by using the static function currentDate() that creates a QDate object containing the system clock's date. An explicit date can also be set using setYMD(). The fromString() function returns a QDate given a string and a date format which is used to interpret the date within the string.
The year(), month(), and day() functions provide access to the year, month, and day numbers. Also, dayOfWeek() and dayOfYear() functions are provided. The same information is provided in textual format by the toString(), shortDayName(), longDayName(), shortMonthName(), and longMonthName() functions.
QDate provides a full set of operators to compare two QDate objects where smaller means earlier, and larger means later.
You can increment (or decrement) a date by a given number of days using addDays(). Similarly you can use addMonths() and addYears(). The daysTo() function returns the number of days between two dates.
The daysInMonth() and daysInYear() functions return how many days there are in this date's month and year, respectively. The isLeapYear() function indicates whether this date is in a leap year.
Note that QDate should not be used for date calculations for dates prior to the introduction of the Gregorian calendar. This calendar was adopted by England from the 14 September 1752 (hence this is the earliest valid QDate), and subsequently by most other Western countries, by 1923. The latest valid date within this scheme is 31 December 7999.
See also QTime, QDateTime, QDateEdit, and QDateTimeEdit.
Constructs a null date. Null dates are invalid.
See also isNull() and isValid().
Constructs a date with year y, month m and day d.
y must be in the range 1752 to 8000, m must be in the range 1 to 12, and d must be in the range 1 to 31.
Warning: If y is in the range 0 to 99, it is interpreted as a year in the range 1900 to 1999.
See also isValid().
Returns a QDate object containing a date ndays later than the date of this object (or earlier if ndays is negative).
See also addMonths(), addYears(), and daysTo().
Returns a QDate object containing a date nmonths later than the date of this object (or earlier if nmonths is negative).
See also addDays() and addYears().
Returns a QDate object containing a date nyears later than the date of this object (or earlier if nyears is negative).
See also addDays() and addMonths().
Returns the day of the month (1 to 31) of this date.
See also year(), month(), and dayOfWeek().
Returns the weekday (1 to 7) for this date.
See also day(), dayOfYear(), and Qt.DayOfWeek.
Returns the day of the year (1 to 365) for this date.
See also day() and dayOfWeek().
Returns the number of days in the month (28 to 31) for this date.
See also day() and daysInYear().
Returns the number of days in the year (365 or 366) for this date.
See also day() and daysInMonth().
Returns the number of days from this date to d (which is negative if d is earlier than this date).
Example:
QDate d1(1995, 5, 17); // May 17, 1995
QDate d2(1995, 5, 20); // May 20, 1995
d1.daysTo(d2); // returns 3
d2.daysTo(d1); // returns -3
See also addDays().
Converts the Julian day jd to a QDate.
See also toJulianDay().
Returns the QDate represented by the string, using the format given, or an invalid date if the string cannot be parsed.
Note for Qt.TextDate: It is recommended that you use the English short month names (e.g. "Jan"). Although localized month names can also be used, they depend on the user's locale settings.
Warning: Qt.LocalDate cannot be used here.
This is an overloaded member function, provided for convenience.
Returns the QDate represented by the string, using the format given, or an invalid date if the string cannot be parsed.
These expressions may be used for the format:
| Expression | Output |
|---|---|
| d | The day as a number without a leading zero (1 to 31) |
| dd | The day as a number with a leading zero (01 to 31) |
| ddd | The abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses QDate.shortDayName(). |
| dddd | The long localized day name (e.g. 'Monday' to 'Sunday'). Uses QDate.longDayName(). |
| M | The month as a number without a leading zero (1 to 12) |
| MM | The month as a number with a leading zero (01 to 12) |
| MMM | The abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses QDate.shortMonthName(). |
| MMMM | The long localized month name (e.g. 'January' to 'December'). Uses QDate.longMonthName(). |
| yy | The year as two digit number (00 to 99) |
| yyyy | The year as four digit number (1752 to 8000) |
All other input characters will be treated as text. Any sequence of characters that are enclosed in single quotes will also be treated as text and will not be used as an expression. For example:
QDate date = QDate.fromString("1MM12car2003", "d'MM'MMcaryyyy");
// date is 1 December 2003
If the format is not satisfied, an invalid QDate is returned. The expressions that don't expect leading zeroes (d, M) will be greedy. This means that they will use two digits even if this will put them outside the accepted range of values and leaves too few digits for other sections. For example, the following format string could have meant January 30 but the M will grab two digits, resulting in an invalid date:
QDate date = QDate.fromString("130", "Md"); // invalid
For any field that is not represented in the format the following defaults are used:
| Field | Default value |
|---|---|
| Year | 1900 |
| Month | 1 |
| Day | 1 |
The following examples demonstrate the default values:
QDate.fromString("1.30", "M.d"); // January 30 1900
QDate.fromString("20000110", "yyyyMMdd"); // January 10, 2000
QDate.fromString("20000110", "yyyyMd"); // January 10, 2000
See also QDateTime.fromString(), QTime.fromString(), QDate.toString(), QDateTime.toString(), and QTime.toString().
Returns true if the specified year is a leap year; otherwise returns false.
Returns true if the date is null; otherwise returns false. A null date is invalid.
See also isValid().
Returns true if this date is valid; otherwise returns false.
See also isNull().
This is an overloaded member function, provided for convenience.
Returns true if the specified date (year y, month m, and day d) is valid; otherwise returns false.
Example:
QDate.isValid(2002, 5, 17); // true
QDate.isValid(2002, 2, 30); // false (Feb 30 does not exist)
QDate.isValid(2004, 2, 29); // true (2004 is a leap year)
QDate.isValid(1202, 6, 6); // false (1202 is pre-Gregorian)
Warning: A y value in the range 00 to 99 is interpreted as 1900 to 1999.
See also isNull() and setYMD().
Returns the long name of the weekday using the following convention:
The day names will be localized according to the system's locale settings.
See also toString(), shortDayName(), shortMonthName(), and longMonthName().
Returns the long name of the month using the following convention:
The month names will be localized according to the system's locale settings.
See also toString(), shortMonthName(), shortDayName(), and longDayName().
Returns the number corresponding to the month of this date, using the following convention:
Sets the date's year y, month m, and day d.
y must be in the range 1752 to 8000, m must be in the range 1 to 12, and d must be in the range 1 to 31.
Warning: If y is in the range 0 to 99, it is interpreted as 1900 to 1999.
Returns true if the date is valid; otherwise returns false.
Returns the name of the weekday using the following convention:
The day names will be localized according to the system's locale settings.
See also toString(), shortMonthName(), longMonthName(), and longDayName().
Returns the name of the month using the following convention:
The month names will be localized according to the system's locale settings.
See also toString(), longMonthName(), shortDayName(), and longDayName().
Converts the date to a Julian day.
See also fromJulianDay().
Returns the date as a string. The format parameter determines the format of the result string.
These expressions may be used:
| Expression | Output |
|---|---|
| d | the day as number without a leading zero (1 to31) |
| dd | the day as number with a leading zero (01 to 31) |
| ddd | the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses QDate.shortDayName(). |
| dddd | the long localized day name (e.g. 'Qt.Monday' to 'Qt.Sunday'). Uses QDate.longDayName(). |
| M | the month as number without a leading zero (1-12) |
| MM | the month as number with a leading zero (01-12) |
| MMM | the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses QDate.shortMonthName(). |
| MMMM | the long localized month name (e.g. 'January' to 'December'). Uses QDate.longMonthName(). |
| yy | the year as two digit number (00 to 99) |
| yyyy | the year as four digit number (1752 to 8000) |
All other input characters will be ignored. Any sequence of characters that are enclosed in singlequotes will be treated as text and not be used as an expression.
Example format strings (assuming that the QDate is the 20 July 1969):
| Format | Result |
|---|---|
| dd.MM.yyyy | 20.07.1969 |
| ddd MMMM d yy | Sun July 20 69 |
| 'The day is' dddd | The day is Sunday |
If the datetime is invalid, an empty string will be returned.
See also QDateTime.toString() and QTime.toString().
This is an overloaded member function, provided for convenience.
Returns the date as a string. The format parameter determines the format of the string.
If the format is Qt.TextDate, the string is formatted in the default way. QDate.shortDayName() and QDate.shortMonthName() are used to generate the string, so the day and month names will be localized names. An example of this formatting is "Sat May 20 1995".
If the format is Qt.ISODate, the string format corresponds to the ISO 8601 extended specification for representations of dates and times, taking the form YYYY-MM-DD, where YYYY is the year, MM is the month of the year (between 01 and 12), and DD is the day of the month between 01 and 31.
If the format is Qt.LocalDate, the string format depends on the locale settings of the system. On Mac OS X, an assumption is made that the date is in the local time zone.
If the datetime is invalid, an empty string will be returned.
See also shortDayName() and shortMonthName().
Returns the week number (1 to 53), and stores the year in *yearNumber unless yearNumber is null (the default).
Returns 0 if the date is invalid.
In accordance with ISO 8601, weeks start on Qt.Monday and the first Qt.Thursday of a year is always in week 1 of that year. Most years have 52 weeks, but some have 53.
*yearNumber is not always the same as year(). For example, 1 January 2000 has week number 52 in the year 1999, and 31 December 2002 has week number 1 in the year 2003.
Copyright (c) 1989 The Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley. The name of the University may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
See also isValid().
Returns the year (1752 to 8000) of this date.
| PyQt 4.0.1 for X11 | Copyright © Riverbank Computing Ltd and Trolltech AS 2006 | Qt 4.1.4 |