A radial graph used to display data in polar plots. More...

Inheritance diagram for QCPPolarGraph:

Public Types
enum	LineStyle

Public Functions
	QCPPolarGraph (QCPPolarAxisAngular keyAxis, QCPPolarAxisRadial valueAxis)

QString	name () const

bool	antialiasedFill () const

bool	antialiasedScatters () const

QPen	pen () const

QBrush	brush () const

bool	periodic () const

QCPPolarAxisAngular *	keyAxis () const

QCPPolarAxisRadial *	valueAxis () const

QCP::SelectionType	selectable () const

bool	selected () const

QCPDataSelection	selection () const

QSharedPointer< QCPGraphDataContainer >	data () const

LineStyle	lineStyle () const

QCPScatterStyle	scatterStyle () const

void	setName (const QString &name)

void	setAntialiasedFill (bool enabled)

void	setAntialiasedScatters (bool enabled)

void	setPen (const QPen &pen)

void	setBrush (const QBrush &brush)

void	setPeriodic (bool enabled)

void	setKeyAxis (QCPPolarAxisAngular *axis)

void	setValueAxis (QCPPolarAxisRadial *axis)

Q_SLOT void	setSelectable (QCP::SelectionType selectable)

Q_SLOT void	setSelection (QCPDataSelection selection)

void	setData (QSharedPointer< QCPGraphDataContainer > data)

void	setData (const QVector< double > &keys, const QVector< double > &values, bool alreadySorted=false)

void	setLineStyle (LineStyle ls)

void	setScatterStyle (const QCPScatterStyle &style)

void	addData (const QVector< double > &keys, const QVector< double > &values, bool alreadySorted=false)

void	addData (double key, double value)

void	coordsToPixels (double key, double value, double &x, double &y) const

const QPointF	coordsToPixels (double key, double value) const

void	pixelsToCoords (double x, double y, double &key, double &value) const

void	pixelsToCoords (const QPointF &pixelPos, double &key, double &value) const

void	rescaleAxes (bool onlyEnlarge=false) const

void	rescaleKeyAxis (bool onlyEnlarge=false) const

void	rescaleValueAxis (bool onlyEnlarge=false, bool inKeyRange=false) const

bool	addToLegend (QCPLegend *legend)

bool	addToLegend ()

bool	removeFromLegend (QCPLegend *legend) const

bool	removeFromLegend () const

virtual double	selectTest (const QPointF &pos, bool onlySelectable, QVariant *details=0) const

virtual QCPPlottableInterface1D *	interface1D ()

virtual QCPRange	getKeyRange (bool &foundRange, QCP::SignDomain inSignDomain=QCP::sdBoth) const

virtual QCPRange	getValueRange (bool &foundRange, QCP::SignDomain inSignDomain=QCP::sdBoth, const QCPRange &inKeyRange=QCPRange()) const

Public Functions inherited from QCPLayerable
	QCPLayerable (QCustomPlot plot, QString targetLayer=QString(), QCPLayerable parentLayerable=nullptr)

bool	visible () const

QCustomPlot *	parentPlot () const

QCPLayerable *	parentLayerable () const

QCPLayer *	layer () const

bool	antialiased () const

void	setVisible (bool on)

Q_SLOT bool	setLayer (QCPLayer *layer)

bool	setLayer (const QString &layerName)

void	setAntialiased (bool enabled)

bool	realVisibility () const

Signals
void	selectionChanged (bool selected)

void	selectionChanged (const QCPDataSelection &selection)

void	selectableChanged (QCP::SelectionType selectable)

Signals inherited from QCPLayerable
void	layerChanged (QCPLayer *newLayer)

Protected Functions
virtual QRect	clipRect () const

virtual void	draw (QCPPainter *painter)

virtual QCP::Interaction	selectionCategory () const

void	applyDefaultAntialiasingHint (QCPPainter *painter) const

virtual void	selectEvent (QMouseEvent event, bool additive, const QVariant &details, bool selectionStateChanged)

virtual void	deselectEvent (bool *selectionStateChanged)

virtual void	drawLinePlot (QCPPainter *painter, const QVector< QPointF > &lines) const

virtual void	drawFill (QCPPainter painter, QVector< QPointF > lines) const

virtual void	drawScatterPlot (QCPPainter *painter, const QVector< QPointF > &scatters, const QCPScatterStyle &style) const

virtual void	drawLegendIcon (QCPPainter *painter, const QRectF &rect) const

void	applyFillAntialiasingHint (QCPPainter *painter) const

void	applyScattersAntialiasingHint (QCPPainter *painter) const

double	pointDistance (const QPointF &pixelPoint, QCPGraphDataContainer::const_iterator &closestData) const

virtual int	dataCount () const

void	getDataSegments (QList< QCPDataRange > &selectedSegments, QList< QCPDataRange > &unselectedSegments) const

void	drawPolyline (QCPPainter *painter, const QVector< QPointF > &lineData) const

void	getVisibleDataBounds (QCPGraphDataContainer::const_iterator &begin, QCPGraphDataContainer::const_iterator &end, const QCPDataRange &rangeRestriction) const

void	getLines (QVector< QPointF > *lines, const QCPDataRange &dataRange) const

void	getScatters (QVector< QPointF > *scatters, const QCPDataRange &dataRange) const

void	getOptimizedLineData (QVector< QCPGraphData > *lineData, const QCPGraphDataContainer::const_iterator &begin, const QCPGraphDataContainer::const_iterator &end) const

void	getOptimizedScatterData (QVector< QCPGraphData > *scatterData, QCPGraphDataContainer::const_iterator begin, QCPGraphDataContainer::const_iterator end) const

QVector< QPointF >	dataToLines (const QVector< QCPGraphData > &data) const

Protected Functions inherited from QCPLayerable
virtual void	parentPlotInitialized (QCustomPlot *parentPlot)

virtual void	mousePressEvent (QMouseEvent *event, const QVariant &details)

virtual void	mouseMoveEvent (QMouseEvent *event, const QPointF &startPos)

virtual void	mouseReleaseEvent (QMouseEvent *event, const QPointF &startPos)

virtual void	mouseDoubleClickEvent (QMouseEvent *event, const QVariant &details)

virtual void	wheelEvent (QWheelEvent *event)

void	initializeParentPlot (QCustomPlot *parentPlot)

void	setParentLayerable (QCPLayerable *parentLayerable)

bool	moveToLayer (QCPLayer *layer, bool prepend)

void	applyAntialiasingHint (QCPPainter *painter, bool localAntialiased, QCP::AntialiasedElement overrideElement) const

Detailed Description

A radial graph used to display data in polar plots.

Warning: In this QCustomPlot version, polar plots are a tech preview. Expect documentation and functionality to be incomplete, as well as changing public interfaces in the future.

Member Enumeration Documentation

§ LineStyle

enum QCPPolarGraph::LineStyle

Defines how the graph's line is represented visually in the plot. The line is drawn with the current pen of the graph (setPen).

See also: setLineStyle

Enumerator
lsNone	data points are not connected with any lines (e.g. data only represented with symbols according to the scatter style, see setScatterStyle)
lsLine	data points are connected by a straight line

Constructor & Destructor Documentation

§ QCPPolarGraph()

QCPPolarGraph::QCPPolarGraph	(	QCPPolarAxisAngular *	keyAxis,
		QCPPolarAxisRadial *	valueAxis
	)

Constructs a graph which uses keyAxis as its angular and valueAxis as its radial axis. keyAxis and valueAxis must reside in the same QCustomPlot, and the radial axis must be associated with the angular axis. If either of these restrictions is violated, a corresponding message is printed to the debug output (qDebug), the construction is not aborted, though.

The created QCPPolarGraph is automatically registered with the QCustomPlot instance inferred from keyAxis. This QCustomPlot instance takes ownership of the QCPPolarGraph, so do not delete it manually but use QCPPolarAxisAngular::removeGraph() instead.

To directly create a QCPPolarGraph inside a plot, you shoud use the QCPPolarAxisAngular::addGraph method.

Member Function Documentation

§ setName()

void QCPPolarGraph::setName ( const QString & name )

The name is the textual representation of this plottable as it is displayed in the legend (QCPLegend). It may contain any UTF-8 characters, including newlines.

§ setAntialiasedFill()

void QCPPolarGraph::setAntialiasedFill ( bool enabled )

Sets whether fills of this plottable are drawn antialiased or not.

Note that this setting may be overridden by QCustomPlot::setAntialiasedElements and QCustomPlot::setNotAntialiasedElements.

§ setAntialiasedScatters()

void QCPPolarGraph::setAntialiasedScatters ( bool enabled )

Sets whether the scatter symbols of this plottable are drawn antialiased or not.

Note that this setting may be overridden by QCustomPlot::setAntialiasedElements and QCustomPlot::setNotAntialiasedElements.

§ setPen()

void QCPPolarGraph::setPen ( const QPen & pen )

The pen is used to draw basic lines that make up the plottable representation in the plot.

For example, the QCPGraph subclass draws its graph lines with this pen.

See also: setBrush

§ setBrush()

void QCPPolarGraph::setBrush ( const QBrush & brush )

The brush is used to draw basic fills of the plottable representation in the plot. The Fill can be a color, gradient or texture, see the usage of QBrush.

For example, the QCPGraph subclass draws the fill under the graph with this brush, when it's not set to Qt::NoBrush.

See also: setPen

§ setKeyAxis()

void QCPPolarGraph::setKeyAxis ( QCPPolarAxisAngular * axis )

The key axis of a plottable can be set to any axis of a QCustomPlot, as long as it is orthogonal to the plottable's value axis. This function performs no checks to make sure this is the case. The typical mathematical choice is to use the x-axis (QCustomPlot::xAxis) as key axis and the y-axis (QCustomPlot::yAxis) as value axis.

Normally, the key and value axes are set in the constructor of the plottable (or QCustomPlot::addGraph when working with QCPGraphs through the dedicated graph interface).

See also: setValueAxis

§ setValueAxis()

void QCPPolarGraph::setValueAxis ( QCPPolarAxisRadial * axis )

The value axis of a plottable can be set to any axis of a QCustomPlot, as long as it is orthogonal to the plottable's key axis. This function performs no checks to make sure this is the case. The typical mathematical choice is to use the x-axis (QCustomPlot::xAxis) as key axis and the y-axis (QCustomPlot::yAxis) as value axis.

Normally, the key and value axes are set in the constructor of the plottable (or QCustomPlot::addGraph when working with QCPGraphs through the dedicated graph interface).

See also: setKeyAxis

§ setSelectable()

void QCPPolarGraph::setSelectable ( QCP::SelectionType selectable )

Sets whether and to which granularity this plottable can be selected.

A selection can happen by clicking on the QCustomPlot surface (When QCustomPlot::setInteractions contains QCP::iSelectPlottables), by dragging a selection rect (When QCustomPlot::setSelectionRectMode is QCP::srmSelect), or programmatically by calling setSelection.

See also: setSelection, QCP::SelectionType

§ setSelection()

void QCPPolarGraph::setSelection ( QCPDataSelection selection )

Sets which data ranges of this plottable are selected. Selected data ranges are drawn differently (e.g. color) in the plot. This can be controlled via the selection decorator (see selectionDecorator).

The entire selection mechanism for plottables is handled automatically when QCustomPlot::setInteractions contains iSelectPlottables. You only need to call this function when you wish to change the selection state programmatically.

Using setSelectable you can further specify for each plottable whether and to which granularity it is selectable. If selection is not compatible with the current QCP::SelectionType set via setSelectable, the resulting selection will be adjusted accordingly (see QCPDataSelection::enforceType).

emits the selectionChanged signal when selected is different from the previous selection state.

See also: setSelectable, selectTest

§ setData() [1/2]

void QCPPolarGraph::setData ( QSharedPointer< QCPGraphDataContainer > data )

This is an overloaded function.

Replaces the current data container with the provided data container.

Since a QSharedPointer is used, multiple QCPPolarGraphs may share the same data container safely. Modifying the data in the container will then affect all graphs that share the container. Sharing can be achieved by simply exchanging the data containers wrapped in shared pointers:

If you do not wish to share containers, but create a copy from an existing container, rather use the QCPDataContainer<DataType>::set method on the graph's data container directly:

See also: addData

§ setData() [2/2]

void QCPPolarGraph::setData	(	const QVector< double > &	keys,
		const QVector< double > &	values,
		bool	alreadySorted = `false`
	)

This is an overloaded function.

Replaces the current data with the provided points in keys and values. The provided vectors should have equal length. Else, the number of added points will be the size of the smallest vector.

If you can guarantee that the passed data points are sorted by keys in ascending order, you can set alreadySorted to true, to improve performance by saving a sorting run.

See also: addData

§ setLineStyle()

void QCPPolarGraph::setLineStyle ( LineStyle ls )

Sets how the single data points are connected in the plot. For scatter-only plots, set ls to lsNone and setScatterStyle to the desired scatter style.

See also: setScatterStyle

§ setScatterStyle()

void QCPPolarGraph::setScatterStyle ( const QCPScatterStyle & style )

Sets the visual appearance of single data points in the plot. If set to QCPScatterStyle::ssNone, no scatter points are drawn (e.g. for line-only-plots with appropriate line style).

See also: QCPScatterStyle, setLineStyle

§ coordsToPixels()

void QCPPolarGraph::coordsToPixels	(	double	key,
		double	value,
		double &	x,
		double &	y
	)		const

Use this method to set an own QCPSelectionDecorator (subclass) instance. This allows you to customize the visual representation of selected data ranges further than by using the default QCPSelectionDecorator.

The plottable takes ownership of the decorator.

The currently set decorator can be accessed via selectionDecorator.

§ selectTest()

double QCPPolarGraph::selectTest	(	const QPointF &	pos,
		bool	onlySelectable,
		QVariant *	details = `0`
	)		const

virtual

This function is used to decide whether a click hits a layerable object or not.

pos is a point in pixel coordinates on the QCustomPlot surface. This function returns the shortest pixel distance of this point to the object. If the object is either invisible or the distance couldn't be determined, -1.0 is returned. Further, if onlySelectable is true and the object is not selectable, -1.0 is returned, too.

If the object is represented not by single lines but by an area like a QCPItemText or the bars of a QCPBars plottable, a click inside the area should also be considered a hit. In these cases this function thus returns a constant value greater zero but still below the parent plot's selection tolerance. (typically the selectionTolerance multiplied by 0.99).

Providing a constant value for area objects allows selecting line objects even when they are obscured by such area objects, by clicking close to the lines (i.e. closer than 0.99*selectionTolerance).

The actual setting of the selection state is not done by this function. This is handled by the parent QCustomPlot when the mouseReleaseEvent occurs, and the finally selected object is notified via the selectEvent/deselectEvent methods.

details is an optional output parameter. Every layerable subclass may place any information in details. This information will be passed to selectEvent when the parent QCustomPlot decides on the basis of this selectTest call, that the object was successfully selected. The subsequent call to selectEvent will carry the details. This is useful for multi-part objects (like QCPAxis). This way, a possibly complex calculation to decide which part was clicked is only done once in selectTest. The result (i.e. the actually clicked part) can then be placed in details. So in the subsequent selectEvent, the decision which part was selected doesn't have to be done a second time for a single selection operation.

In the case of 1D Plottables (QCPAbstractPlottable1D, like QCPGraph or QCPBars) details will be set to a QCPDataSelection, describing the closest data point to pos.

You may pass nullptr as details to indicate that you are not interested in those selection details.

See also: selectEvent, deselectEvent, mousePressEvent, wheelEvent, QCustomPlot::setInteractions, QCPAbstractPlottable1D::selectTestRect

Reimplemented from QCPLayerable.

§ clipRect()

QRect QCPPolarGraph::clipRect ( ) const

protectedvirtual

Returns the clipping rectangle of this layerable object. By default, this is the viewport of the parent QCustomPlot. Specific subclasses may reimplement this function to provide different clipping rects.

The returned clipping rect is set on the painter before the draw function of the respective object is called.

Reimplemented from QCPLayerable.

§ draw()

void QCPPolarGraph::draw ( QCPPainter * painter )

protectedvirtual

This function draws the layerable with the specified painter. It is only called by QCustomPlot, if the layerable is visible (setVisible).

Before this function is called, the painter's antialiasing state is set via applyDefaultAntialiasingHint, see the documentation there. Further, the clipping rectangle was set to clipRect.

Implements QCPLayerable.

§ selectionCategory()

QCP::Interaction QCPPolarGraph::selectionCategory ( ) const

protectedvirtual

Returns the selection category this layerable shall belong to. The selection category is used in conjunction with QCustomPlot::setInteractions to control which objects are selectable and which aren't.

Subclasses that don't fit any of the normal QCP::Interaction values can use QCP::iSelectOther. This is what the default implementation returns.

See also: QCustomPlot::setInteractions

Reimplemented from QCPLayerable.

§ applyDefaultAntialiasingHint()

void QCPPolarGraph::applyDefaultAntialiasingHint ( QCPPainter * painter ) const

protectedvirtual

This function applies the default antialiasing setting to the specified painter, using the function applyAntialiasingHint. It is the antialiasing state the painter is put in, when draw is called on the layerable. If the layerable has multiple entities whose antialiasing setting may be specified individually, this function should set the antialiasing state of the most prominent entity. In this case however, the draw function usually calls the specialized versions of this function before drawing each entity, effectively overriding the setting of the default antialiasing hint.

First example: QCPGraph has multiple entities that have an antialiasing setting: The graph line, fills and scatters. Those can be configured via QCPGraph::setAntialiased, QCPGraph::setAntialiasedFill and QCPGraph::setAntialiasedScatters. Consequently, there isn't only the QCPGraph::applyDefaultAntialiasingHint function (which corresponds to the graph line's antialiasing), but specialized ones like QCPGraph::applyFillAntialiasingHint and QCPGraph::applyScattersAntialiasingHint. So before drawing one of those entities, QCPGraph::draw calls the respective specialized applyAntialiasingHint function.

Second example: QCPItemLine consists only of a line so there is only one antialiasing setting which can be controlled with QCPItemLine::setAntialiased. (This function is inherited by all layerables. The specialized functions, as seen on QCPGraph, must be added explicitly to the respective layerable subclass.) Consequently it only has the normal QCPItemLine::applyDefaultAntialiasingHint. The QCPItemLine::draw function doesn't need to care about setting any antialiasing states, because the default antialiasing hint is already set on the painter when the draw function is called, and that's the state it wants to draw the line with.

Implements QCPLayerable.

§ selectEvent()

void QCPPolarGraph::selectEvent	(	QMouseEvent *	event,
		bool	additive,
		const QVariant &	details,
		bool *	selectionStateChanged
	)

protectedvirtual

This event is called when the layerable shall be selected, as a consequence of a click by the user. Subclasses should react to it by setting their selection state appropriately. The default implementation does nothing.

event is the mouse event that caused the selection. additive indicates, whether the user was holding the multi-select-modifier while performing the selection (see QCustomPlot::setMultiSelectModifier). if additive is true, the selection state must be toggled (i.e. become selected when unselected and unselected when selected).

Every selectEvent is preceded by a call to selectTest, which has returned positively (i.e. returned a value greater than 0 and less than the selection tolerance of the parent QCustomPlot). The details data you output from selectTest is fed back via details here. You may use it to transport any kind of information from the selectTest to the possibly subsequent selectEvent. Usually details is used to transfer which part was clicked, if it is a layerable that has multiple individually selectable parts (like QCPAxis). This way selectEvent doesn't need to do the calculation again to find out which part was actually clicked.

selectionStateChanged is an output parameter. If the pointer is non-null, this function must set the value either to true or false, depending on whether the selection state of this layerable was actually changed. For layerables that only are selectable as a whole and not in parts, this is simple: if additive is true, selectionStateChanged must also be set to true, because the selection toggles. If additive is false, selectionStateChanged is only set to true, if the layerable was previously unselected and now is switched to the selected state.

See also: selectTest, deselectEvent

Reimplemented from QCPLayerable.

§ deselectEvent()

void QCPPolarGraph::deselectEvent ( bool * selectionStateChanged )

protectedvirtual

This event is called when the layerable shall be deselected, either as consequence of a user interaction or a call to QCustomPlot::deselectAll. Subclasses should react to it by unsetting their selection appropriately.

just as in selectEvent, the output parameter selectionStateChanged (if non-null), must return true or false when the selection state of this layerable has changed or not changed, respectively.

See also: selectTest, selectEvent

Reimplemented from QCPLayerable.

§ drawLinePlot()

void QCPPolarGraph::drawLinePlot	(	QCPPainter *	painter,
		const QVector< QPointF > &	lines
	)		const

protectedvirtual

Draws lines between the points in lines, given in pixel coordinates.

See also: drawScatterPlot, drawImpulsePlot, QCPAbstractPlottable1D::drawPolyline

§ drawFill()

void QCPPolarGraph::drawFill	(	QCPPainter *	painter,
		QVector< QPointF > *	lines
	)		const

protectedvirtual

Draws the fill of the graph using the specified painter, with the currently set brush.

Depending on whether a normal fill or a channel fill (setChannelFillGraph) is needed, getFillPolygon or getChannelFillPolygon are used to find the according fill polygons.

In order to handle NaN Data points correctly (the fill needs to be split into disjoint areas), this method first determines a list of non-NaN segments with getNonNanSegments, on which to operate. In the channel fill case, getOverlappingSegments is used to consolidate the non-NaN segments of the two involved graphs, before passing the overlapping pairs to getChannelFillPolygon.

Pass the points of this graph's line as lines, in pixel coordinates.

See also: drawLinePlot, drawImpulsePlot, drawScatterPlot

§ drawScatterPlot()

void QCPPolarGraph::drawScatterPlot	(	QCPPainter *	painter,
		const QVector< QPointF > &	scatters,
		const QCPScatterStyle &	style
	)		const

protectedvirtual

Draws scatter symbols at every point passed in scatters, given in pixel coordinates. The scatters will be drawn with painter and have the appearance as specified in style.

See also: drawLinePlot, drawImpulsePlot

§ getLines()

void QCPPolarGraph::getLines	(	QVector< QPointF > *	lines,
		const QCPDataRange &	dataRange
	)		const

protected

This method retrieves an optimized set of data points via getOptimizedLineData, an branches out to the line style specific functions such as dataToLines, dataToStepLeftLines, etc. according to the line style of the graph.

lines will be filled with points in pixel coordinates, that can be drawn with the according draw functions like drawLinePlot and drawImpulsePlot. The points returned in lines aren't necessarily the original data points. For example, step line styles require additional points to form the steps when drawn. If the line style of the graph is lsNone, the lines vector will be empty.

dataRange specifies the beginning and ending data indices that will be taken into account for conversion. In this function, the specified range may exceed the total data bounds without harm: a correspondingly trimmed data range will be used. This takes the burden off the user of this function to check for valid indices in dataRange, e.g. when extending ranges coming from getDataSegments.

See also: getScatters

§ dataToLines()

QVector< QPointF > QCPPolarGraph::dataToLines ( const QVector< QCPGraphData > & data ) const

protected

Takes raw data points in plot coordinates as data, and returns a vector containing pixel coordinate points which are suitable for drawing the line style lsLine.

The source of data is usually getOptimizedLineData, and this method is called in getLines if the line style is set accordingly.

See also: dataToStepLeftLines, dataToStepRightLines, dataToStepCenterLines, dataToImpulseLines, getLines, drawLinePlot

The documentation for this class was generated from the following files:

src/polar/polargraph.h
src/polar/polargraph.cpp

Public Types

Public Functions

Signals

Protected Functions

Detailed Description

Member Enumeration Documentation

§ LineStyle

Constructor & Destructor Documentation

§ QCPPolarGraph()

Member Function Documentation

§ setName()

§ setAntialiasedFill()

§ setAntialiasedScatters()

§ setPen()

§ setBrush()

§ setKeyAxis()

§ setValueAxis()

§ setSelectable()

§ setSelection()

§ setData() [1/2]

§ setData() [2/2]

§ setLineStyle()

§ setScatterStyle()

§ coordsToPixels()

§ selectTest()

§ clipRect()

§ draw()

§ selectionCategory()

§ applyDefaultAntialiasingHint()

§ selectEvent()

§ deselectEvent()

§ drawLinePlot()

§ drawFill()

§ drawScatterPlot()

§ getLines()

§ dataToLines()